|
| ||||||||||||||||
The IPv4 address class is a trivial class for handling IPv4 addresses and for performing operations on them such as printing and masking.
| typedef in_addr InAddrType | InAddrType |
| typedef sockaddr_in SockAddrType | SockAddrType |
| IPv4 ()
| IPv4 |
Default constructor
The address value is initialized to INADDR_ANY.
| IPv4 (const IPv4& ipv4)
| IPv4 |
Constructor from another IPv4 address.
Parameters:
| ipv4 | the IPv4 address to assign the address value from. |
| explicit IPv4 (uint32_t value)
| IPv4 |
Constructor from an integer value.
Parameters:
| value | 32-bit unsigned integer to assign to the address. |
| explicit IPv4 (const uint8_t *from_uint8)
| IPv4 |
Constructor from a (uint8_t *) memory pointer.
Parameters:
| from_uint8 | the pointer to the memory to copy the address value from. |
| IPv4 (const in_addr& from_in_addr)
| IPv4 |
Constructor from in_addr structure.
Parameters:
| from_in_addr | the storage to copy the address value from. |
| IPv4 (const sockaddr& sa)
throw (InvalidFamily) | IPv4 |
Constructor from sockaddr structure.
Parameters:
| sa | sockaddr to construct IPv4 addr from. |
| IPv4 (const sockaddr_in& sin)
throw (InvalidFamily) | IPv4 |
Constructor from sockaddr_in structure.
Parameters:
| sin | sockaddr_in to construct IPv4 addr from. |
| IPv4 (const char *from_string)
throw (InvalidString) | IPv4 |
Constructor from a string.
Parameters:
| from_cstring | C-style string in the IPv4 dotted decimal human-readable format used for initialization. |
| size_t copy_out (uint8_t *to_uint8)
| copy_out |
[const]
Copy the IPv4 raw address to specified memory location.
@param: to_uint8 the pointer to the memory to copy the address to.
Returns: the number of copied octets.
| size_t copy_out (in_addr& to_in_addr)
| copy_out |
[const]
Copy the IP4 raw address to an in_addr structure.
Parameters:
| to_in_addr | the storage to copy the address to. |
Returns: the number of copied octets.
| size_t copy_out (sockaddr& to_sockaddr)
| copy_out |
[const]
Copy the IPv4 raw address to a sockaddr structure.
Copy the raw address held within an IPv4 instance to an sockaddr structure and assign appropriately and set fields within sockaddr appropriately.
Parameters:
| to_sockaddr | the storage to copy the address to. |
Returns: the number of copied octets.
| size_t copy_out (sockaddr_in& to_sockaddr_in)
| copy_out |
[const]
Copy the IPv4 raw address to a sockaddr_in structure.
Copy the raw address held within an IPv4 instance to an sockaddr_in structure and assign appropriately and set fields within sockaddr_in appropriately.
Parameters:
| to_sockaddr_in | the storage to copy the address to. |
Returns: the number of copied octets.
| size_t copy_in (const uint8_t *from_uint8)
| copy_in |
Copy a raw IPv4 address from specified memory location into IPv4 structure.
Parameters:
| from_uint8 | the memory address to copy the address from. |
Returns: the number of copied octets.
| size_t copy_in (const in_addr& from_in_addr)
| copy_in |
Copy a raw IPv4 address from a in_addr structure into IPv4 structure.
Parameters:
| from_in_addr | the storage to copy the address from. |
Returns: the number of copied octets.
| size_t copy_in (const sockaddr& from_sockaddr)
throw (InvalidFamily) | copy_in |
Copy a raw address from a sockaddr structure into IPv4 structure.
Note that the address in the sockaddr structure must be of IPv4 address family.
Parameters:
| from_sockaddr | the storage to copy the address from. |
Returns: the number of copied octets.
| size_t copy_in (const sockaddr_in& from_sockaddr_in)
throw (InvalidFamily) | copy_in |
Copy a raw address from a sockaddr_in structure into IPv4 structure.
Note that the address in the sockaddr structure must be of IPv4 address family.
Parameters:
| from_sockaddr_in | the storage to copy the address from. |
Returns: the number of copied octets.
| inline IPv4 operator~ ()
| operator~ |
[const]
Bitwise-Negation Operator
Returns: address complement (i.e., all 0s become 1s, and vice-versa).
| inline IPv4 operator| (const IPv4& other)
| operator| |
[const]
OR Operator
Parameters:
| other | the right-hand operand to OR with. |
Returns: bitwise OR of two addresses.
| inline IPv4 operator& (const IPv4& other)
| operator& |
[const]
AND Operator
Parameters:
| other | the right-hand operand to AND with. |
Returns: bitwise AND of two addresses.
| inline IPv4 operator^ (const IPv4& other)
| operator^ |
[const]
XOR Operator
Returns: eXclusive-OR of two addresses.
| IPv4 operator<< (uint32_t left_shift)
| operator<< |
[const]
Operator <<
Parameters:
| left_shift | the number of bits to shift to the left. |
Returns: IPv4 address that is shift bitwise to the left.
| IPv4 operator>> (uint32_t right_shift)
| operator>> |
[const]
Operator >>
Parameters:
| right_shift | the number of bits to shift to the right. |
Returns: IPv4 address that is shift bitwise to the right.
| bool operator< (const IPv4& other)
| operator< |
[const]
Less-Than Operator
Parameters:
| other | the right-hand operand to compare against. |
Returns: true if the left-hand operand is numerically smaller than the right-hand operand.
| bool operator== (const IPv4& other)
| operator== |
[const]
Equality Operator
Parameters:
| other | the right-hand operand to compare against. |
Returns: true if the left-hand operand is numerically same as the right-hand operand.
| bool operator!= (const IPv4& other)
| operator!= |
[const]
Not-Equal Operator
Parameters:
| other | the right-hand operand to compare against. |
Returns: true if the left-hand operand is numerically not same as the right-hand operand.
| bool operator== (const IPv4Range& rhs)
| operator== |
[const]
Equality Operator for IPv4 against IPv4Range operand.
Parameters:
| rhs | the right-hand IPv4Range operand. |
Returns: true if the value of the left-hand operand falls inside the range defined by the right-hand operand.
| bool operator!= (const IPv4Range& rhs)
| operator!= |
[const]
Not-equal Operator for IPv4 against IPv4Range operand.
Parameters:
| rhs | the right-hand IPv4Range operand. |
Returns: true if the value of the left-hand operand falls outside the range defined by the right-hand operand.
| bool operator< (const IPv4Range& rhs)
| operator< |
[const]
Less-than comparison for IPv4 against IPv4Range operand.
Parameters:
| rhs | the right-hand IPv4Range operand. |
Returns: true if the value of the left-hand operand is bellow the range defined by the right-hand operand.
| bool operator<= (const IPv4Range& rhs)
| operator<= |
[const]
Less-than or equal comparison for IPv4 against IPv4Range
Parameters:
| rhs | the right-hand IPv4Range operand. |
Returns: true if the value of the left-hand operand is bellow or within the range defined by the right-hand operand.
| bool operator> (const IPv4Range& rhs)
| operator> |
[const]
Greater-than comparison for IPv4 against IPv4Range operand.
Parameters:
| rhs | the right-hand IPv4Range operand. |
Returns: true if the value of the left-hand operand is above the range defined by the right-hand operand.
| bool operator>= (const IPv4Range& rhs)
| operator>= |
[const]
Greater-than or equal comparison for IPv4 against IPv4Range
Parameters:
| rhs | the right-hand IPv4Range operand. |
Returns: true if the value of the left-hand operand is above or within the range defined by the right-hand operand.
| IPv4& operator-- ()
| operator-- |
Decrement Operator
The numerical value of this address is decremented by one. However, if the address value before the decrement was all-0s, after the decrement its value would be all-1s (i.e., it will wrap-around).
Returns: a reference to this address after it was decremented by one.
| IPv4& operator++ ()
| operator++ |
Increment Operator
The numerical value of this address is incremented by one. However, if the address value before the increment was all-1s, after the increment its value would be all-0s (i.e., it will wrap-around).
Returns: a reference to this address after it was incremented by one.
| string str ()
| str |
[const]
Convert this address from binary form to presentation format.
Returns: C++ string with the human-readable ASCII representation of the address.
| bool is_zero ()
| is_zero |
[const]
Test if this address is numerically zero.
Returns: true if the address is numerically zero.
| bool is_unicast ()
| is_unicast |
[const]
Test if this address is a valid unicast address.
Returns: true if the address is a valid unicast address.
| bool is_multicast ()
| is_multicast |
[const]
Test if this address is a valid multicast address.
Returns: true if the address is a valid multicast address.
| bool is_linklocal_unicast ()
| is_linklocal_unicast |
[const]
Test if this address is a valid link-local unicast address.
Returns: true if the address is a valid unicast address, and the scope of the address is link-local.
| bool is_nodelocal_multicast ()
| is_nodelocal_multicast |
[const]
Test if this address is a valid node-local multicast address.
Returns: true if the address is a valid multicast address, and the scope of the address is node-local. XXX: in IPv4 there is no node-local multicast scope, therefore the return value is always false.
| bool is_linklocal_multicast ()
| is_linklocal_multicast |
[const]
Test if this address is a valid link-local multicast address.
Returns: true if the address is a valid multicast address, and the scope of the address is link-local.
| bool is_loopback ()
| is_loopback |
[const]
Test if this address is a valid loopback address.
Returns: true if the address is a valid loopback address.
| inline size_t addr_size ()
| addr_size |
[static]
Get the address octet-size.
Note that this is a static function and can be used without a particular object. Example: size_t my_size = IPv4::addr_size(); OK size_t my_size = ipv4.addr_size(); OK
Returns: address size in number of octets.
| inline uint32_t addr_bitlen ()
| addr_bitlen |
[static]
Get the address bit-length.
Note that this is a static function and can be used without a particular object. Example: uint32_t my_bitlen = IPv4::addr_bitlen(); OK uint32_t my_bitlen = ipv4.addr_bitlen(); OK
Returns: address size in number of bits.
| uint32_t ip_multicast_base_address_mask_len ()
| ip_multicast_base_address_mask_len |
[static]
Get the mask length for the multicast base address.
Note that this is a static function and can be used without a particular object. Example: uint32_t my_len = IPv4::ip_multicast_base_address_mask_len(); OK uint32_t my_len = ipv4.ip_multicast_base_address_mask_len(); OK
Returns: the multicast base address mask length for family AF_INET.
| IPv4 make_prefix (uint32_t mask_len)
throw (InvalidNetmaskLength) | make_prefix |
[static]
Make an IPv4 mask prefix.
Parameters:
| mask_len | the length of the mask to create. |
Returns: a new IPv4 address that contains a mask of length mask_len.
| inline IPv4 mask_by_prefix_len (uint32_t mask_len)
throw (InvalidNetmaskLength) | mask_by_prefix_len |
[const]
Make an IPv4 address prefix.
Parameters:
| prefix_len | the length of the mask of the prefix to create. |
Returns: a new IPv4 address created by masking this address with a mask of length prefix_len.
| uint32_t mask_len ()
| mask_len |
[const]
Get the mask length.
Returns: the prefix length of the contiguous mask presumably stored as an IPv4 address.
| inline uint32_t addr ()
| addr |
[const]
Get the uint32_t raw value of this address.
Returns: the value of this IPv4 address as an unsigned 32-bit integer.
| inline void set_addr (uint32_t value)
| set_addr |
Set the address value.
Parameters:
| value | unsigned 32-bit integer value to set the address to. |
| enum { AF = AF_INET } |
| enum { IPV = 4 } |
Constant for IP protocol version
| inline const int af ()
| af |
[static]
Get the address family.
Returns: the address family of this address.
| inline const uint32_t ip_version ()
| ip_version |
[static]
Get the IP protocol version.
Returns: the IP protocol version of this address.
| const string& ip_version_str ()
| ip_version_str |
[static]
Get the human-readable string with the IP protocol version.
Returns: the human-readable string with the IP protocol version of this address.
| inline uint32_t bits (uint32_t lsb, uint32_t len)
| bits |
[const]
Extract bits from an address.
Parameters:
| lsb | starting bit position (from the right) to extract. |
| len | number of bits to extract. The maximum value is 32. |
Returns: the first len bits starting from the rightmost position lsb. The returned bits are in host order.
| inline uint32_t bit_count ()
| bit_count |
[const]
Count the number of bits that are set in this address.
Returns: the number of bits that are set in this address.
| inline uint32_t leading_zero_count ()
| leading_zero_count |
[const]
Count the number of leading zeroes in this address.
Returns: the number of leading zeroes in this address.
| inline const IPv4& ZERO (int af = AF_INET)
| ZERO |
[static]
Pre-defined IPv4 address constants.
| inline const IPv4& ANY (int af = AF_INET)
| ANY |
[static]
| inline const IPv4& ALL_ONES (int af = AF_INET)
| ALL_ONES |
[static]
| inline const IPv4& LOOPBACK (int af = AF_INET)
| LOOPBACK |
[static]
| inline const IPv4& MULTICAST_BASE (int af = AF_INET)
| MULTICAST_BASE |
[static]
| inline const IPv4& MULTICAST_ALL_SYSTEMS (int af = AF_INET)
| MULTICAST_ALL_SYSTEMS |
[static]
| inline const IPv4& MULTICAST_ALL_ROUTERS (int af = AF_INET)
| MULTICAST_ALL_ROUTERS |
[static]
| inline const IPv4& DVMRP_ROUTERS (int af = AF_INET)
| DVMRP_ROUTERS |
[static]
| inline const IPv4& OSPFIGP_ROUTERS (int af = AF_INET)
| OSPFIGP_ROUTERS |
[static]
| inline const IPv4& OSPFIGP_DESIGNATED_ROUTERS (int af = AF_INET)
| OSPFIGP_DESIGNATED_ROUTERS |
[static]
| inline const IPv4& RIP2_ROUTERS (int af = AF_INET)
| RIP2_ROUTERS |
[static]
| inline const IPv4& PIM_ROUTERS (int af = AF_INET)
| PIM_ROUTERS |
[static]
| inline const IPv4& SSM_ROUTERS (int af = AF_INET)
| SSM_ROUTERS |
[static]
| static const uint32_t ADDR_BITLEN | ADDR_BITLEN |
