[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: [pci] Newcomer to PCI



>>>>> "Stefan" == Stefan Bergstr,Av(Bm  writes:

    Stefan> A modern MoBo only drives the PCI signals to 3.3V but are 5V
    Stefan> tolerant.  It is safe to use a 3.3V chip as long as you make
    Stefan> sure you don’t insert another board that will drive the signal
    Stefan> levels to 5V. Just put your oscilloscope to your PC and you will
    Stefan> see.

    Stefan> Have Fun STB

    >> -----Ursprungligt meddelande----- Fr,Ae(Bn: owner-pci@opencores.org
    >> [mailto:owner-pci@opencores.org] F,Av(Br jazimme2@yahoo.com Skickat: den
    >> 13 maj 2003 06:46 Till: pci@opencores.org ,AD(Bmne: Re: [pci] Newcomer to
Stefan,

please don't attach the whole thread below your contribution. That way
clutters up the archives and makes them unusable on the long run.

Bye
-- 
Uwe Bonnes                bon@elektron.ikp.physik.tu-darmstadt.de

Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml