[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [pci] Newcomer to PCI
>>>>> "jazimme2" == jazimme2 <jazimme2@yahoo.com> writes:
jazimme2> It's keyed as a universal card, so it should work in any PCI
jazimme2> slot at 32- bit, 33MHz. You just need user constraints to
jazimme2> tell the Xilinx software whether it is 5V PCI I/O or 3.3V.
jazimme2> Note that there are now two (completely?) different versions
jazimme2> of the development board out, so if someone on here gives you
jazimme2> project files for the old one you'll probably have some
jazimme2> editing to do. Incidentally, the Virtex/SpartanII is the
My contributed project/ucf file for the Memec Spartan-II 2S200 PCI Board
Revision 2 is now included in the Opencore PCI core.
Bye
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml