Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Compile von VDR 2.4.1 für Plugin easyvdr Test
#51
Hi Wirbel
(26.06.2020, 19:01)Wirbel schrieb: @mango: du bist ja der Sehende unter uns (debian-) Blinden. könntest uns dabei helfen?
Was war eigentlich die Frage? Big Grin

Gruß Aaron
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#52
PPA easy-new-setup << diese Frage..



So, damit kann ich zumindest xineliboutput starten.

https://gen2vdr.de/wirbel/easyvdr/vdr-ea....06.27.tgz

Code:
[EasyPluginManager]
Args=--local=sxfe --remote=127.0.0.1:37890 --fullscreen
AutoRun=true
Stop=false


Passiert ist folgendes, der PluginManager von VDR selbst hat dem Plugin
dazwischen gefunkt. Und damit wurde zuerst vom easyvdr Plugin aus das xinelibout initialisiert
und eine Sekunde später noch einmal, diesmal von vdr selbst. Deswegen ist dann xinelibout ausgestiegen
und anscheinend reißt das ganze Plugin beim Stop den VDR mit.

Bei mir erkennt xinelibout die Bildschirm Größe nicht korrekt, egal wie ich das Plugin starte.
Das hat aber nix mit dem Thread hier zu tun.
Zitieren
#53
Hi Wirbel
Zitat:PPA easy-new-setup << diese Frage..
Ja gut, ein neues Paket im GIT debian konform zu bauen, steht bei mir auch noch auf der todoo Liste. Da wäre eine Erleuchtung von Wolfgang wirklich gut.

Zum Test mit Plugin 27.06.2020>>>
Das hier drunter sieht allerdings nicht so gut aus:
Zitat:[email protected]:/var/lib/vdr# /usr/bin/vdr -Peasyvdr
void cEasyPluginManager::Initialize():193 : *** begin avail plugins ***
void cEasyPluginManager::Initialize():210 : control
void cEasyPluginManager::Initialize():210 : softhddevice
void cEasyPluginManager::Initialize():210 : xineliboutput
void cEasyPluginManager::Initialize():213 : *** end avail plugins ***
vdr: no primary device found - using first device!
virtual cPluginEasyvdr::~cPluginEasyvdr():85 : plugin destroyed.


/var/log/sysconfig
Zitat:Jun 27 11:27:12 easyVDR vdr: [38468] VDR version 2.4.1 started
Jun 27 11:27:12 easyVDR vdr: [38468] codeset is 'UTF-8' - known
Jun 27 11:27:12 easyVDR vdr: [38468] found 28 locales in /usr/share/locale
Jun 27 11:27:12 easyVDR vdr: [38468] loading plugin: /usr/lib/vdr/plugins/libvdr-easyvdr.so.2.4.1
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/setup.conf
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: ChannelBlocker = 0
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: DumpNaluFill = 0
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: SupportTeletext = 0
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: WarEagleIcons = 1
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: ZapcockpitHideLastGroup = 0
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: ZapcockpitShowAllChannels = 0
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: ZapcockpitUseGroups = 1
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: ZapcockpitUseHints = 1
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: unknown config parameter: ZapcockpitUseInfo = 1
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/sources.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/diseqc.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/scr.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/channels.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/timers.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/commands.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/reccmds.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/svdrphosts.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/remote.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/keymacros.conf
Jun 27 11:27:12 easyVDR vdr: [38468] loading /var/lib/vdr/camresponses.conf
Jun 27 11:27:12 easyVDR vdr: [38468] registered source parameters for 'A - ATSC'
Jun 27 11:27:12 easyVDR vdr: [38468] registered source parameters for 'C - DVB-C'
Jun 27 11:27:12 easyVDR vdr: [38468] registered source parameters for 'S - DVB-S'
Jun 27 11:27:12 easyVDR vdr: [38468] registered source parameters for 'T - DVB-T'
Jun 27 11:27:12 easyVDR vdr: [38468] no DVB device found
Jun 27 11:27:12 easyVDR vdr: [38468] initializing plugin: easyvdr (2020.06.27): easyvdr setup helper plugin
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: invalid primary device number: 1
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: no primary device found - using first device!
Jun 27 11:27:12 easyVDR vdr: [38468] ERROR: invalid primary device number: 1
Jun 27 11:27:12 easyVDR vdr: [38470] epg data reader thread started (pid=38468, tid=38470, prio=high)
Jun 27 11:27:12 easyVDR vdr: [38470] reading EPG data from /var/cache/vdr/epg.data
Jun 27 11:27:12 easyVDR vdr: [38469] video directory scanner thread started (pid=38468, tid=38469, prio=low)
Jun 27 11:27:12 easyVDR vdr: [38469] video directory scanner thread ended (pid=38468, tid=38469)
Jun 27 11:27:12 easyVDR vdr: [38468] deleting plugin: easyvdr
Jun 27 11:27:12 easyVDR vdr: [38470] epg data reader thread ended (pid=38468, tid=38470)
Jun 27 11:27:12 easyVDR vdr: [38468] exiting, exit code 2
Jun 27 11:27:15 easyVDR tracker-store[38437]: OK
Jun 27 11:27:15 easyVDR systemd[906]: tracker-store.service: Succeeded.

/etc/vdr/conf.d/xineliboutput_settings.ini
Code:
[EasyPluginManager]
Args=--local=none --primary --remote=127.0.0.1:37890
AutoRun=true
Stop=false

EasyPluginManager::Args=--local=none --primary --remote=127.0.0.1:37890

Wirbel schrieb:Bei mir erkennt xinelibout die Bildschirm Größe nicht korrekt, egal wie ich das Plugin starte.
Das hat aber nix mit dem Thread hier zu tun.

Deswegen die Parameter von weiter oben. Zusätzlich nutzen wir vdr-sxfe direkt und starten es nach.
Zum Test um das Frontend zu sehen, hab ich einfach immer folgende Zeile im Terminal benutzt:
Code:
vdr-sxfe --post tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 xvdr+tcp://localhost
Aber vielleicht reden wir gerade aneinander vorbei und du meinst noch was anderes.

Ps: Warum eigentlich Xinelibout auch wichtig ist:
wir nutzen im Moment zwei Frontends, Softhddevice als vaapi & vdpau Ausführung, Xinelibout für Softwarescaling. Das war bisher so gut, das eine Weiterführung in der Kombination gut wäre.

Gruß Aaron
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#54
Hi,

(27.06.2020, 11:36)gb schrieb: Ps: Warum eigentlich Xinelibout auch wichtig ist:
wir nutzen im Moment zwei Frontends, Softhddevice als vaapi & vdpau Ausführung, Xinelibout für Softwarescaling. Das war bisher so gut, das eine Weiterführung in der Kombination gut wäre.
um schnell mal was in VB zu testen ist das Plugin sehr nützllich!

Gruss
Wolfgang

Zitieren
#55
Hallo,

Code:
apt update && apt dist-upgrade
apt install software-properties-common
add-apt-repository ppa:easyvdr-team/easyvdr-new-setup
Erstelle Datei
Code:
touch /etc/apt/preferences.d/easyvdr-new-setup-1003
Inhalt:
Code:
Package: *
Pin: release o=LP-PPA-easyvdr-team-easyvdr-new-setup
Pin-Priority: 1003
Code:
apt update
apt install easyvdr-depends
apt update && apt upgrade

Paket easyvdr-dev "libqt4-dev & libqt4-opengl-dev" kommentiert ,somit braucht es
es kein PPA für qt4-dev.Auch wurde vdr-dev kommentiert da sonst das alte Paket
VDR-2.2.0-dev installiert wird.Im Paket easyvdr-depends werden diese Pakete
Zitat:vdr
vdr-plugin-streamdev-server
vdr-plugin-setup
kommentiert.Als nächstes werde ich einen VDR-2.4.1(patch easvdr & menuorg) in diesem PPA bauen,mit neuer vdr-abi
"vdr-abi-2.4.1-easyvdr5" damit wird der Install anderer Plugins(z.B Ubuntu-Quellen) ausgeschlossen.
Plugins die bei install/auswahl Frontend kommen auch dazu.
Auch Plugin control & vdr-plugin-easyvdr wird paketiert.VDR & Plugins werden Debian conform(vdrargs & vdrctl) gebaut.
Die benötigten Files für Plugin easyvdr kann man bei rebuild hinzufügen.Um den Aufwand für den Paketbau gering
zu halten,sollten wird uns soweit möglich an die Standard-Pakete von Debian/Ubuntu halten,da dies den zeitlichen
Aufwand in grenzen hält.

Gruss
Wolfgang

Zitieren
#56
Hallo Wolfgang, 
Cool dass du das so baust, unsere Selbsttests waren ja eher eine improvisierte Notlösung! 
Den VDR Patch für glibc 2.3.1 brauchst du auch noch! 

Zu gbs Test:
Die Primary Device Fehler hatte ich mit Softhddevice ja auch. Da ist noch was zu optimieren. 

Soll ich noch die neue easyvdr-Plugin Version lokal testen? 

Mfg Stefan
Test-VDR1: HP rp5700 Fertigsystem, Core2Duo E6400, 2GB RAM, Mygica t230 Stick als Tuner, nvidia Slim-GT218 512MB PCIe x1     -   v3.5-64
VDR2 in Rente
VDR3 in Rente
VDR4: MSI G31M2 v2, Intel E5200, 6" t6963c gLCD, 2GB, WD Red 4TB, 2x TT3200, ASUS GT730-SL-2GD3-BRK, mod. Digitainergeh.       -   v3.5-64
VDR5: GIGABYTE GA-G31M-S2L, Intel E5200, GT630 passiv, 2GB, 3TB, 6"  t6963c gLCD, mod. Digitainergeh.          -   v3.5-64
VDR6: MSI MS-7236, Intel E2140, GT630 passiv, 2GB, WD Green 2TB, 6" t6963c gLCD, 2x TT3200    -    v2.5-64
Hilfe gefällig? Dann brauchen wir ein easyInfo aus easyPortal!
Zitieren
#57
Hallo Aaron und Stefan,

bitte testet mal

https://gen2vdr.de/wirbel/easyvdr/vdr-ea....06.28.tgz


Ich zumindest kann damit xineliboutput starten (wie mit der vorherigen Version auch schon..).

Vor dem Test: bitte die Ausgabe des neuen tools easyvdrctl --all-status posten.
Diese wird beim make install nach /usr/local/bin installiert:

Code:
root [ /usr/src/vdr-2.4.1 ]# /usr/local/bin/easyvdrctl-2.4.1 --all-status
Plugin            | install | ini    | AutoRun | Stop | Arguments
--------------------------------------------------------------------------------
control            | no      | valid  | yes    | yes  |
satip              | no      | valid  | no      | yes  | -d2
softhddevice      | no      | valid  | no      | no  | -f -v vdpau -a hw:1,7
xineliboutput      | no      | valid  | yes    | no  | --local=none --primary --remote=127.0.0.1:37890 --fullscreen
Diese tool wäre eine Art Ersatz/Ergänzung später für die jetzige debian Methode zum Verwalten der ini files anstelle der confs..
Für mich wäre Input zur jetzigen Funktion/Erweiterung interessant.


Ich habe vdr-sxfe mit Aarons Befehl gestartet, aber ich habe das Plugin seit Jahren(!) nicht verwendet
Code:
vdr-sxfe --post tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 xvdr+tcp://localhost

Damit bekomme ich ein kleines live Bild von xinelibout, aber nicht fullscreen, sondern im Fenster. control wird wie gewünscht geladen.


Zitat:vdr-plugin-streamdev-server
@mango: geht streamdev-server nicht?

Zitat:Auch Plugin control & vdr-plugin-easyvdr wird paketiert.VDR & Plugins werden Debian conform(vdrargs & vdrctl) gebaut.
@mango: sehr gut! Ich möchte - auch wenn ich dieses Plugin für euch schreibe - besser keine generelle *Abhängigkeit* von diesem Plugin. Davon gibt es genug..
Besser wäre es, sich *alle* Optionen offen zu halten - auch falls jemand später doch das setup - plugin fixen kann und es die 'Goldene Lösung' gibt.
In diesem Sinne wäre es gut, perspektivisch alle Plugins für 2.4.x nur 1x bauen zu müssen - und alle bisherige Arbeit weiter zu nutzen.
Zitieren
#58
Big Grin  sehr geil, dit läuft
Zitat:roo[email protected]:/var/lib/vdr#  /usr/local/bin/easyvdrctl-2.4.1 --all-status
Plugin            | install | ini    | AutoRun | Stop | Arguments
--------------------------------------------------------------------------------
control            | no      | valid  | yes    | yes  |
softhddevice      | no      | valid  | no      | no  | -f -v vdpau -a default
xineliboutput      | no      | valid  | yes    | no  | --local=none --primary --remote=127.0.0.1:37890


Zitat:[email protected]:/var/lib/vdr# /usr/bin/vdr -Peasyvdr
void cEasyPluginManager::Initialize():212 : *** begin avail plugins ***
void cEasyPluginManager::Initialize():229 : control
void cEasyPluginManager::Initialize():229 : softhddevice
void cEasyPluginManager::Initialize():229 : xineliboutput
void cEasyPluginManager::Initialize():232 : *** end avail plugins ***
bool cEasyPluginManager::AutoLoad():103 : softhddevice: no auto load

Zitat:Damit bekomme ich ein kleines live Bild von xinelibout, aber nicht fullscreen, sondern im Fenster. control wird wie gewünscht geladen.
Angel Hab dir die falsche Zeile gepostet, aber das doch wuscht, hauptsache man sieht was passiert.

Gruß Aaron

Edit:
[OT]Mit meinen minimalen Anpassungen nun auch über den Upstart, was ja auch schon sehr erfreulich ist.[/OT]


Angehängte Dateien
.jpg   xineliboutput.jpg (Größe: 147,19 KB / Downloads: 3)
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#59
Warten wir mal ab, wie es bei Stefan läuft.

Kannst du noch mal softhddevice antesten? Wurde ja viel geändert.
Zitieren
#60
Klar kann ich das, das muss ich dann am produktiv System machen. Da NVIDIA nötig. Allerdings nutzt Stefan eine gt1030 oder so, ich hingegen eine gt720. Kann also durch Nutzung des nvidia-driver-340 in die Hose gehn, weil das build vom Softhddevice von mir nicht sauber gebaut wurde. Für sowas ist Wolfgang Goldstaub  Big Grin

Ich guck mal
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#61
Hi,

Zitat:[email protected]:/usr/src/vdr-2.4.2/vdr/PLUGINS/src/easyvdr-2020.06.28# easyvdrctl-2.4.2 --all-status
Plugin            | install | ini    | AutoRun | Stop | Arguments
--------------------------------------------------------------------------------
control            | no      | valid  | yes    | yes  |
satip              | no      | valid  | no      | yes  | -d2
softhddevice      | no      | valid  | yes    | no  | -f -v vdpau -a default -w alsa-driver-broken
Hi,

es startet VDR anscheinend:

Zitat:[email protected]:/usr/src/vdr-2.4.2/vdr# vdr -c. -v. -Peasyvdr
void cEasyPluginManager::Initialize():212 : *** begin avail plugins ***
void cEasyPluginManager::Initialize():229 : softhddevice
void cEasyPluginManager::Initialize():232 : *** end avail plugins ***
Aber kein Bild, X läuft evtl. kein Mauszeiger! PChanger geht auch nicht...



Zitat:Jun 28 16:59:58 easyVDR vdr: [37689] VDR version 2.4.2 started
Jun 28 16:59:58 easyVDR vdr: [37689] codeset is 'UTF-8' - known
Jun 28 16:59:58 easyVDR vdr: [37689] found 28 locales in /usr/src/vdr-2.4.2/vdr/locale
Jun 28 16:59:58 easyVDR vdr: [37689] no locale for language code 'bul'
Jun 28 16:59:58 easyVDR vdr: [37689] loading plugin: /usr/src/vdr-2.4.2/vdr/PLUGINS/lib/libvdr-easyvdr.so.2.4.2
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./setup.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./sources.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./diseqc.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./scr.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./channels.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./timers.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./svdrphosts.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./remote.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./keymacros.conf
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./camresponses.conf
Jun 28 16:59:58 easyVDR vdr: [37689] registered source parameters for 'A - ATSC'
Jun 28 16:59:58 easyVDR vdr: [37689] registered source parameters for 'C - DVB-C'
Jun 28 16:59:58 easyVDR vdr: [37689] registered source parameters for 'S - DVB-S'
Jun 28 16:59:58 easyVDR vdr: [37689] registered source parameters for 'T - DVB-T'
Jun 28 16:59:58 easyVDR vdr: [37690] video directory scanner thread started (pid=37689, tid=37690, prio=low)
Jun 28 16:59:58 easyVDR vdr: [37691] epg data reader thread started (pid=37689, tid=37691, prio=high)
Jun 28 16:59:58 easyVDR vdr: [37689] detected /dev/dvb/adapter0/frontend0
Jun 28 16:59:58 easyVDR vdr: [37691] reading EPG data from /var/cache/vdr/epg.data
Jun 28 16:59:58 easyVDR vdr: [37689] probing /dev/dvb/adapter0/frontend0
Jun 28 16:59:58 easyVDR vdr: [37689] creating cDvbDevice
Jun 28 16:59:58 easyVDR vdr: [37689] new device number 1 (card index 1)
Jun 28 16:59:58 easyVDR vdr: [37691] epg data reader thread ended (pid=37689, tid=37691)
Jun 28 16:59:58 easyVDR vdr: [37689] DVB API version is 0x050B (VDR was built with 0x050B)
Jun 28 16:59:58 easyVDR vdr: [37689] frontend 0/0 provides DVB-S,DVB-S2,DSS with QPSK ("Technisat SkyStar USB HD (DVB-S/S2)")
Jun 28 16:59:58 easyVDR vdr: [37694] frontend 0/0 tuner thread started (pid=37689, tid=37694, prio=high)
Jun 28 16:59:58 easyVDR vdr: [37694] cTimeMs: using monotonic clock (resolution is 1 ns)
Jun 28 16:59:58 easyVDR vdr: [37689] found 1 DVB device
Jun 28 16:59:58 easyVDR vdr: [37689] initializing plugin: easyvdr (2020.06.28): easyvdr setup helper plugin
Jun 28 16:59:58 easyVDR vdr: [37689] loading plugin: /usr/src/vdr-2.4.2/vdr/PLUGINS/lib/libvdr-softhddevice.so.2.4.2
Jun 28 16:59:58 easyVDR vdr: [37695] device 1 section handler thread started (pid=37689, tid=37695, prio=low)
Jun 28 16:59:58 easyVDR vdr: [37689] initializing plugin: softhddevice (0.7.0-GITaa9fd0e): Ein Software und GPU emulieres HD-Gerät
Jun 28 16:59:58 easyVDR vdr: [37689] new device number 2 (card index 2)
Jun 28 16:59:58 easyVDR vdr: [37689] setting primary device to 2
Jun 28 16:59:58 easyVDR vdr: [37689] assuming manual start of VDR
Jun 28 16:59:58 easyVDR vdr: [37689] setting current skin to "lcars"
Jun 28 16:59:58 easyVDR vdr: [37689] loading ./themes/lcars-default.theme
Jun 28 16:59:58 easyVDR vdr: [37689] starting plugin: easyvdr
Jun 28 16:59:58 easyVDR vdr: [37689] starting plugin: softhddevice
Jun 28 16:59:58 easyVDR vdr: audio: 'alsa' output module used
Jun 28 16:59:58 easyVDR vdr: audio/alsa: playback open 'default' error: Verbindungsaufbau abgelehnt
Jun 28 16:59:58 easyVDR vdr: audio/alsa: can't open mixer 'default'
Jun 28 16:59:58 easyVDR vdr: audio:  44100Hz supports 0 0 0 0 0 0 0 0 channels
Jun 28 16:59:58 easyVDR vdr: audio:  48000Hz supports 0 0 0 0 0 0 0 0 channels
Jun 28 16:59:58 easyVDR vdr: audio: 192000Hz supports 0 0 0 0 0 0 0 0 channels
Jun 28 16:59:58 easyVDR vdr: video/vdpau: Can't create vdp device on display ':0.0'
Jun 28 16:59:58 easyVDR vdr: video: 'vdpau' output module isn't supported
Jun 28 16:59:58 easyVDR kernel: [ 7372.407427] NVRM: API mismatch: the client has the version 440.100, but
Jun 28 16:59:58 easyVDR kernel: [ 7372.407427] NVRM: this kernel module has the version 440.64.  Please
Jun 28 16:59:58 easyVDR kernel: [ 7372.407427] NVRM: make sure that this kernel module and all NVIDIA driver
Jun 28 16:59:58 easyVDR kernel: [ 7372.407427] NVRM: components have the same version.
Jun 28 16:59:58 easyVDR vdr: [softhddev] ready
Jun 28 16:59:58 easyVDR vdr: [37689] remote control XKeySym - keys known
Jun 28 16:59:58 easyVDR vdr: [37689] remote control KBD - learning keys
Jun 28 16:59:58 easyVDR vdr: [37700] KBD remote control thread started (pid=37689, tid=37700, prio=high)
Jun 28 16:59:58 easyVDR vdr: [37690] video directory scanner thread ended (pid=37689, tid=37690)
Ich hab vorher udate & upgrade gemacht (dist-upgrade hat nix gefunden).

Und Wolfgangs neues ppa eingebunden und easyvdr-dev installiert. Und upgrade danach.

easyvdr-Plugin hab ich neue Version allein gebaut, ohne VDR upzudaten.

Warum der nvidia-Treiber andere Version sein soll, versteh ich nicht...
Edit: vergesst es, nach Reboot war das neue Modul ok und VDR startet und zeigt Bild mit Softhddevice. Ton kommt natürlich nicht, da der Parameter für softhddevice ja falsch ist!



Zitat:Jun 28 17:12:28 easyVDR vdr: [2154] codeset is 'UTF-8' - known
Jun 28 17:12:28 easyVDR vdr: [2154] found 28 locales in /usr/src/vdr-2.4.2/vdr/locale
Jun 28 17:12:28 easyVDR vdr: [2154] no locale for language code 'bul'
Jun 28 17:12:28 easyVDR vdr: [2154] loading plugin: /usr/src/vdr-2.4.2/vdr/PLUGINS/lib/libvdr-easyvdr.so.2.4.2
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./setup.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./sources.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./diseqc.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./scr.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./channels.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./timers.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./svdrphosts.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./remote.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./keymacros.conf
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./camresponses.conf
Jun 28 17:12:28 easyVDR vdr: [2154] registered source parameters for 'A - ATSC'
Jun 28 17:12:28 easyVDR vdr: [2154] registered source parameters for 'C - DVB-C'
Jun 28 17:12:28 easyVDR vdr: [2154] registered source parameters for 'S - DVB-S'
Jun 28 17:12:28 easyVDR vdr: [2154] registered source parameters for 'T - DVB-T'
Jun 28 17:12:28 easyVDR vdr: [2157] video directory scanner thread started (pid=2154, tid=2157, prio=low)
Jun 28 17:12:28 easyVDR vdr: [2158] epg data reader thread started (pid=2154, tid=2158, prio=high)
Jun 28 17:12:28 easyVDR vdr: [2154] detected /dev/dvb/adapter0/frontend0
Jun 28 17:12:28 easyVDR vdr: [2158] reading EPG data from /var/cache/vdr/epg.data
Jun 28 17:12:28 easyVDR vdr: [2154] probing /dev/dvb/adapter0/frontend0
Jun 28 17:12:28 easyVDR vdr: [2154] creating cDvbDevice
Jun 28 17:12:28 easyVDR vdr: [2154] new device number 1 (card index 1)
Jun 28 17:12:28 easyVDR vdr: [2158] epg data reader thread ended (pid=2154, tid=2158)
Jun 28 17:12:28 easyVDR vdr: [2154] DVB API version is 0x050B (VDR was built with 0x050B)
Jun 28 17:12:28 easyVDR vdr: [2154] frontend 0/0 provides DVB-S,DVB-S2,DSS with QPSK ("Technisat SkyStar USB HD (DVB-S/S2)")
Jun 28 17:12:28 easyVDR vdr: [2161] frontend 0/0 tuner thread started (pid=2154, tid=2161, prio=high)
Jun 28 17:12:28 easyVDR vdr: [2154] cTimeMs: using monotonic clock (resolution is 1 ns)
Jun 28 17:12:28 easyVDR vdr: [2161] cTimeMs: using monotonic clock (resolution is 1 ns)
Jun 28 17:12:28 easyVDR vdr: [2162] device 1 section handler thread started (pid=2154, tid=2162, prio=low)
Jun 28 17:12:28 easyVDR vdr: [2154] found 1 DVB device
Jun 28 17:12:28 easyVDR vdr: [2154] initializing plugin: easyvdr (2020.06.28): easyvdr setup helper plugin
Jun 28 17:12:28 easyVDR vdr: [2154] loading plugin: /usr/src/vdr-2.4.2/vdr/PLUGINS/lib/libvdr-softhddevice.so.2.4.2
Jun 28 17:12:28 easyVDR vdr: [2154] initializing plugin: softhddevice (0.7.0-GITaa9fd0e): Ein Software und GPU emulieres HD-Gerät
Jun 28 17:12:28 easyVDR vdr: [2154] new device number 2 (card index 2)
Jun 28 17:12:28 easyVDR vdr: [2154] setting primary device to 2
Jun 28 17:12:28 easyVDR vdr: [2154] assuming manual start of VDR
Jun 28 17:12:28 easyVDR vdr: [2154] setting current skin to "lcars"
Jun 28 17:12:28 easyVDR vdr: [2154] loading ./themes/lcars-default.theme
Jun 28 17:12:28 easyVDR vdr: [2154] starting plugin: easyvdr
Jun 28 17:12:28 easyVDR vdr: [2154] starting plugin: softhddevice
Jun 28 17:12:28 easyVDR vdr: audio: 'alsa' output module used
Jun 28 17:12:28 easyVDR vdr: audio/alsa: playback open 'default' error: Verbindungsaufbau abgelehnt
Jun 28 17:12:28 easyVDR vdr: audio/alsa: can't open mixer 'default'
Jun 28 17:12:28 easyVDR vdr: audio:  44100Hz supports 0 0 0 0 0 0 0 0 channels
Jun 28 17:12:28 easyVDR vdr: audio:  48000Hz supports 0 0 0 0 0 0 0 0 channels
Jun 28 17:12:28 easyVDR vdr: audio: 192000Hz supports 0 0 0 0 0 0 0 0 channels
Jun 28 17:12:28 easyVDR vdr: video/vdpau: VDPAU API version: 1
Jun 28 17:12:28 easyVDR vdr: video/vdpau: VDPAU information: NVIDIA VDPAU Driver Shared Library  440.100  Fri May 29 08:12:22 UTC 2020
Jun 28 17:12:28 easyVDR vdr: video/vdpau: highest supported high quality scaling 1
Jun 28 17:12:28 easyVDR vdr: video/vdpau: feature deinterlace temporal supported
Jun 28 17:12:28 easyVDR vdr: video/vdpau: feature deinterlace temporal spatial supported
Jun 28 17:12:28 easyVDR vdr: video/vdpau: attribute skip chroma deinterlace supported
Jun 28 17:12:28 easyVDR vdr: video/vdpau: 4:2:0 chroma format with 8192x8192 supported
Jun 28 17:12:28 easyVDR vdr: video/vdpau: 4:2:2 chroma format with 8192x8192 supported
Jun 28 17:12:28 easyVDR vdr: video/vdpau: 4:4:4 chroma format with 8192x8192 supported
Jun 28 17:12:28 easyVDR vdr: video/vdpau: 8bit BGRA format with 32768x32768 supported
Jun 28 17:12:28 easyVDR vdr: video/vdpau: 10bit RGBA format with 32768x32768 supported
Jun 28 17:12:28 easyVDR vdr: video/vdpau: created osd output surface 1920x1080 with id 0x00000009
Jun 28 17:12:28 easyVDR vdr: [softhddev] ready
Jun 28 17:12:28 easyVDR vdr: [2154] remote control XKeySym - keys known
Jun 28 17:12:28 easyVDR vdr: [2154] remote control KBD - learning keys
Jun 28 17:12:28 easyVDR vdr: [2167] KBD remote control thread started (pid=2154, tid=2167, prio=high)
Jun 28 17:12:28 easyVDR vdr: video/vdpau: created osd output surface 1918x1055 with id 0x00000009
Jun 28 17:12:29 easyVDR vdr: video/vdpau: created osd output surface 1920x1080 with id 0x00000009
Jun 28 17:12:29 easyVDR vdr: [2157] video directory scanner thread ended (pid=2154, tid=2157)
Jun 28 17:12:39 easyVDR vdr: [2154] loading /var/cache/vdr/cam.data
Jun 28 17:12:39 easyVDR vdr: [2154] switching to channel 1 S19.2E-1-1101-28106 (Das Erste)
Jun 28 17:12:39 easyVDR vdr: [2180] device 1 receiver thread started (pid=2154, tid=2180, prio=high)
Jun 28 17:12:39 easyVDR vdr: [2181] SVDRP server handler thread started (pid=2154, tid=2181, prio=low)
Jun 28 17:12:39 easyVDR vdr: [2181] SVDRP easyVDR opening port 6419/tcp
Jun 28 17:12:39 easyVDR vdr: [2181] SVDRP easyVDR listening on port 6419/tcp
Jun 28 17:12:39 easyVDR vdr: [2182] device 1 TS buffer thread started (pid=2154, tid=2182, prio=high)
Jun 28 17:12:39 easyVDR vdr: [2154] OSD size changed to 1920x1080 @ 1
Jun 28 17:12:40 easyVDR vdr: audio: 2 channels unsupported
Jun 28 17:12:40 easyVDR vdr: video: get hwaccel context, not supported
Jun 28 17:12:41 easyVDR vdr: video/vdpau: missed frame (1/8)
Jun 28 17:12:47 easyVDR vdr: [2162] changing transponder data of channel 1 (Das Erste) from 11837:HC34M2O0S0:S19.2E:27500 to 11837:HC34M2S0:S19.2E:27500
Jun 28 17:12:47 easyVDR vdr: [2162] changing transponder data of channel 10 (hr-fernsehen) from 11837:HC34M2O0S0:S19.2E:27500 to 11837:HC34M2S0:S19.2E:27500
Jun 28 17:12:47 easyVDR vdr: [2162] changing transponder data of channel 24 (BR Fernsehen Nord) from 11837:HC34M2O0S0:S19.2E:27500 to 11837:HC34M2S0:S19.2E:27500
Jun 28 17:12:47 easyVDR vdr: [2162] changing transponder data of channel 31 (SWR Fernsehen BW) from 11837:HC34M2O0S0:S19.2E:27500 to 11837:HC34M2S0:S19.2E:27500
Jun 28 17:12:47 easyVDR vdr: [2162] changing transponder data of channel 33 (WDR Köln) from 11837:HC34M2O0S0:S19.2E:27500 to 11837:HC34M2S0:S19.2E:27500
Jun 28 17:12:48 easyVDR vdr: [2154] retuning due to modification of channel 1 (Das Erste)
Jun 28 17:12:48 easyVDR vdr: [2154] switching to channel 1 S19.2E-1-1101-28106 (Das Erste)
Jun 28 17:12:48 easyVDR vdr: [2182] device 1 TS buffer thread ended (pid=2154, tid=2182)
Jun 28 17:12:48 easyVDR vdr: [2180] buffer stats: 107724 (2%) used
Jun 28 17:12:48 easyVDR vdr: [2180] device 1 receiver thread ended (pid=2154, tid=2180)
Jun 28 17:12:48 easyVDR vdr: [2183] device 1 receiver thread started (pid=2154, tid=2183, prio=high)
Jun 28 17:12:48 easyVDR vdr: [2184] device 1 TS buffer thread started (pid=2154, tid=2184, prio=high)
Jun 28 17:12:49 easyVDR vdr: audio: can't set channels 0 sample-rate 0Hz
Jun 28 17:12:49 easyVDR vdr: audio: 2 channels unsupported
Jun 28 17:12:50 easyVDR vdr: video: get hwaccel context, not supported
Jun 28 17:12:59 easyVDR vdr: [2162] creating new channel 'BR Fernsehen Süd,;ARD' on S19.2E transponder 111837 with id 1-1101-28107-0
Jun 28 17:12:59 easyVDR vdr: [2162] changing pids of channel 174 (BR Fernsehen Süd) from 0+0=0:0:0:0 to 201+201=2:[email protected],[email protected];[email protected]:205=deu:204
Jun 28 17:13:41 easyVDR vdr: [2154] switching to channel 2 S19.2E-1-1079-28006 (ZDF)
Jun 28 17:13:41 easyVDR vdr: [2184] device 1 TS buffer thread ended (pid=2154, tid=2184)
Jun 28 17:13:41 easyVDR vdr: [2183] buffer stats: 107912 (2%) used
Jun 28 17:13:41 easyVDR vdr: [2183] device 1 receiver thread ended (pid=2154, tid=2183)
Jun 28 17:13:41 easyVDR vdr: [2185] device 1 receiver thread started (pid=2154, tid=2185, prio=high)
Jun 28 17:13:41 easyVDR vdr: [2186] device 1 TS buffer thread started (pid=2154, tid=2186, prio=high)
Jun 28 17:13:41 easyVDR vdr: audio: can't set channels 0 sample-rate 0Hz
Jun 28 17:13:41 easyVDR vdr: audio: 2 channels unsupported
Jun 28 17:13:43 easyVDR vdr: video: get hwaccel context, not supported
Jun 28 17:13:45 easyVDR vdr: [2154] switching to channel 3 S19.2E-1-1089-12003 (RTL Television)
Jun 28 17:13:45 easyVDR vdr: [2186] device 1 TS buffer thread ended (pid=2154, tid=2186)


MfG,
Stefan
Test-VDR1: HP rp5700 Fertigsystem, Core2Duo E6400, 2GB RAM, Mygica t230 Stick als Tuner, nvidia Slim-GT218 512MB PCIe x1     -   v3.5-64
VDR2 in Rente
VDR3 in Rente
VDR4: MSI G31M2 v2, Intel E5200, 6" t6963c gLCD, 2GB, WD Red 4TB, 2x TT3200, ASUS GT730-SL-2GD3-BRK, mod. Digitainergeh.       -   v3.5-64
VDR5: GIGABYTE GA-G31M-S2L, Intel E5200, GT630 passiv, 2GB, 3TB, 6"  t6963c gLCD, mod. Digitainergeh.          -   v3.5-64
VDR6: MSI MS-7236, Intel E2140, GT630 passiv, 2GB, WD Green 2TB, 6" t6963c gLCD, 2x TT3200    -    v2.5-64
Hilfe gefällig? Dann brauchen wir ein easyInfo aus easyPortal!
Zitieren
#62
Erster Gehversuch mit SoftHDDevice:
Zitat:[email protected]:/var/lib/vdr#  /usr/local/bin/easyvdrctl-2.4.1 --all-status
Plugin            | install | ini    | AutoRun | Stop | Arguments
--------------------------------------------------------------------------------
epgtableid0        | yes    | missing | no      | yes  |
hello              | yes    | missing | no      | yes  |
osddemo            | yes    | missing | no      | yes  |
pictures          | yes    | missing | no      | yes  |
remote            | yes    | missing | no      | yes  |
skincurses        | yes    | missing | no      | yes  |
softhddevice      | yes    | valid  | yes    | no  | -f  -v vdpau -d :0  -a default    -w alsa-driver-broken
status            | yes    | missing | no      | yes  |
svccli            | yes    | missing | no      | yes  |
svcsvr            | yes    | missing | no      | yes  |
svdrpdemo          | yes    | missing | no      | yes  |
Ja ich weiß, keine ini's, Plugins existieren auch nicht (von Hand gelöscht ) , aber irgendwo sind noch Symlinks zu den Plugins die nicht mehr da sind.
Zitat:[email protected]:~$ /usr/bin/vdr -Peasyvdr
void cEasyPluginManager::Initialize():212 : *** begin avail plugins ***
void cEasyPluginManager::Initialize():229 : control
void cEasyPluginManager::Initialize():229 : softhddevice
void cEasyPluginManager::Initialize():229 : xineliboutput
void cEasyPluginManager::Initialize():232 : *** end avail plugins ***
bool cEasyPluginManager::AutoLoad():93 : control: no auto load
bool cEasyPluginManager::AutoLoad():93 : xineliboutput: no auto load
virtual cPluginEasyvdr::~cPluginEasyvdr():85 : plugin destroyed.

Dann zum eigentlichen..
Zitat:Jun 28 16:59:54 easyVDR vdr: [2399] VDR version 2.4.1 started
Jun 28 16:59:54 easyVDR vdr: [2399] codeset is 'UTF-8' - known
Jun 28 16:59:54 easyVDR vdr: [2399] found 28 locales in /usr/share/locale
Jun 28 16:59:54 easyVDR vdr: [2399] loading plugin: /usr/lib/vdr/plugins/libvdr-easyvdr.so.2.4.1
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/setup.conf
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: ChannelBlocker = 0
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: DumpNaluFill = 0
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: SupportTeletext = 0
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: WarEagleIcons = 1
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: ZapcockpitHideLastGroup = 0
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: ZapcockpitShowAllChannels = 0
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: ZapcockpitUseGroups = 1
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: ZapcockpitUseHints = 1
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR: unknown config parameter: ZapcockpitUseInfo = 1
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/sources.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/diseqc.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/scr.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/channels.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/timers.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/commands.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/reccmds.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/svdrphosts.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/remote.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/keymacros.conf
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/camresponses.conf
Jun 28 16:59:54 easyVDR vdr: [2400] video directory scanner thread started (pid=2399, tid=2400, prio=low)
Jun 28 16:59:54 easyVDR vdr: [2399] registered source parameters for 'A - ATSC'
Jun 28 16:59:54 easyVDR vdr: [2399] registered source parameters for 'C - DVB-C'
Jun 28 16:59:54 easyVDR vdr: [2399] registered source parameters for 'S - DVB-S'
Jun 28 16:59:54 easyVDR vdr: [2399] registered source parameters for 'T - DVB-T'
Jun 28 16:59:54 easyVDR vdr: [2400] video directory scanner thread ended (pid=2399, tid=2400)
Jun 28 16:59:54 easyVDR vdr: [2399] detected /dev/dvb/adapter1/frontend0
Jun 28 16:59:54 easyVDR vdr: [2401] epg data reader thread started (pid=2399, tid=2401, prio=high)
Jun 28 16:59:54 easyVDR vdr: [2401] reading EPG data from /var/cache/vdr/epg.data
Jun 28 16:59:54 easyVDR vdr: [2399] detected /dev/dvb/adapter0/frontend0
Jun 28 16:59:54 easyVDR vdr: [2399] probing /dev/dvb/adapter0/frontend0
Jun 28 16:59:54 easyVDR vdr: [2399] creating cDvbDevice
Jun 28 16:59:54 easyVDR vdr: [2399] new device number 1 (card index 1)
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR (dvbdevice.c,1870): /dev/dvb/adapter0/frontend0: Das Gerät oder die Ressource ist belegt
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR (dvbdevice.c,427): Ungültiger Dateideskriptor
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR (dvbdevice.c,1870): /dev/dvb/adapter0/frontend0: Das Gerät oder die Ressource ist belegt
Jun 28 16:59:54 easyVDR vdr: [2399] cTimeMs: using monotonic clock (resolution is 1 ns)
Jun 28 16:59:54 easyVDR vdr: [2399] probing /dev/dvb/adapter1/frontend0
Jun 28 16:59:54 easyVDR vdr: [2399] creating cDvbDevice
Jun 28 16:59:54 easyVDR vdr: [2399] new device number 2 (card index 2)
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR (dvbdevice.c,1870): /dev/dvb/adapter1/frontend0: Das Gerät oder die Ressource ist belegt
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR (dvbdevice.c,427): Ungültiger Dateideskriptor
Jun 28 16:59:54 easyVDR vdr: [2399] ERROR (dvbdevice.c,1870): /dev/dvb/adapter1/frontend0: Das Gerät oder die Ressource ist belegt
Jun 28 16:59:54 easyVDR vdr: [2399] found 2 DVB devices
Jun 28 16:59:54 easyVDR vdr: [2399] initializing plugin: easyvdr (2020.06.28): easyvdr setup helper plugin
Jun 28 16:59:54 easyVDR vdr: [2399] loading plugin: /usr/lib/vdr/plugins/libvdr-softhddevice.so.2.4.1
Jun 28 16:59:54 easyVDR vdr: [2403] device 1 section handler thread started (pid=2399, tid=2403, prio=low)
Jun 28 16:59:54 easyVDR vdr: [2404] frontend 1/0 tuner thread started (pid=2399, tid=2404, prio=high)
Jun 28 16:59:54 easyVDR vdr: [2405] device 2 section handler thread started (pid=2399, tid=2405, prio=low)
Jun 28 16:59:54 easyVDR vdr: [2402] frontend 0/0 tuner thread started (pid=2399, tid=2402, prio=high)
Jun 28 16:59:54 easyVDR vdr: [2401] epg data reader thread ended (pid=2399, tid=2401)
Jun 28 16:59:54 easyVDR vdr: [2399] initializing plugin: softhddevice (0.7.0-GITaa9fd0e): Ein Software und GPU emulieres HD-Gerät
Jun 28 16:59:54 easyVDR vdr: [2399] new device number 3 (card index 3)
Jun 28 16:59:54 easyVDR vdr: [2399] setting primary device to 3
Jun 28 16:59:54 easyVDR vdr: [2399] [softhddev]stopping OpenGL Worker Thread
Jun 28 16:59:54 easyVDR vdr: [2399] [softhddev]OpenGL Worker Thread stopped
Jun 28 16:59:54 easyVDR vdr: [2399] assuming manual start of VDR
Jun 28 16:59:54 easyVDR vdr: [2399] skin "anthra_1920_OS9" not available - using "lcars" instead
Jun 28 16:59:54 easyVDR vdr: [2399] loading /var/lib/vdr/themes/lcars-default.theme
Jun 28 16:59:54 easyVDR vdr: [2399] starting plugin: easyvdr
Jun 28 16:59:54 easyVDR vdr: [2399] starting plugin: softhddevice
Jun 28 16:59:54 easyVDR vdr: audio: 'alsa' output module used
Jun 28 16:59:54 easyVDR vdr: audio/alsa: supports pause: yes
Jun 28 16:59:56 easyVDR vdr: audio:  44100Hz supports 1 2 3 4 5 6 7 8 channels
Jun 28 16:59:56 easyVDR vdr: audio:  48000Hz supports 1 2 3 4 5 6 7 8 channels
Jun 28 16:59:56 easyVDR vdr: audio: 192000Hz supports 1 2 3 4 5 6 7 8 channels
Jun 28 16:59:56 easyVDR vdr: video/vdpau: VDPAU API version: 1
Jun 28 16:59:56 easyVDR vdr: video/vdpau: VDPAU information: NVIDIA VDPAU Driver Shared Library  340.108  Wed Dec 11 14:31:24 PST 2019
Jun 28 16:59:56 easyVDR vdr: video/vdpau: highest supported high quality scaling 1
Jun 28 16:59:56 easyVDR vdr: video/vdpau: feature deinterlace temporal supported
Jun 28 16:59:56 easyVDR vdr: video/vdpau: feature deinterlace temporal spatial supported
Jun 28 16:59:56 easyVDR vdr: video/vdpau: attribute skip chroma deinterlace supported
Jun 28 16:59:56 easyVDR vdr: video/vdpau: 4:2:0 chroma format with 4096x4096 supported
Jun 28 16:59:56 easyVDR vdr: video/vdpau: 4:2:2 chroma format with 4096x4096 supported
Jun 28 16:59:56 easyVDR vdr: video/vdpau: 8bit BGRA format with 16384x16384 supported
Jun 28 16:59:56 easyVDR vdr: video/vdpau: 10bit RGBA format with 16384x16384 supported
Jun 28 16:59:56 easyVDR vdr: video/vdpau: created osd output surface 1920x1080 with id 0x00000009
Jun 28 16:59:56 easyVDR vdr: [softhddev] ready
Jun 28 16:59:56 easyVDR vdr: [2399] skin "anthra_1920_OS9" not available - using "lcars" instead
Jun 28 16:59:56 easyVDR vdr: [2399] loading /var/lib/vdr/themes/lcars-default.theme
Jun 28 16:59:56 easyVDR vdr: [2399] remote control XKeySym - keys known
Jun 28 16:59:56 easyVDR vdr: [2435] KBD remote control thread started (pid=2399, tid=2435, prio=high)
Jun 28 16:59:56 easyVDR vdr: [2399] remote control LIRC - keys known
Jun 28 16:59:56 easyVDR vdr: [2399] remote control KBD - keys known
Jun 28 16:59:56 easyVDR vdr: [2399] loading /var/cache/vdr/cam.data
Jun 28 16:59:56 easyVDR vdr: [2399] switching to channel 1 S19.2E-1-1019-10301 (Das Erste HD)
Jun 28 16:59:56 easyVDR vdr: [2399] info: Kanal nicht verfügbar!
Jun 28 16:59:56 easyVDR vdr: [2399] [softhddev]Trying to start OpenGL Worker Thread
Jun 28 16:59:56 easyVDR vdr: [2434] LIRC remote control thread started (pid=2399, tid=2434, prio=high)
Jun 28 16:59:56 easyVDR vdr: [2436] oglThread thread started (pid=2399, tid=2436, prio=high)
Jun 28 16:59:56 easyVDR vdr: [2436] [softhddev]OpenGL using display :0
Jun 28 16:59:56 easyVDR vdr: [2436] [softhddev]OpenGL Context initialized
Jun 28 16:59:56 easyVDR vdr: [2436] [softhddev]Shaders initialized
Jun 28 16:59:56 easyVDR vdr: [2436] [softhddev]vdpau interop initialized
Jun 28 16:59:56 easyVDR vdr: [2436] [softhddev]Vertex buffers initialized
Jun 28 16:59:56 easyVDR vdr: [2436] [softhddev]Maximum Pixmap size: 16384x16384px
Jun 28 16:59:56 easyVDR vdr: [2399] [softhddev]OpenGL Worker Thread successfully started
Jun 28 17:00:02 easyVDR vdr: [2437] SVDRP server handler thread started (pid=2399, tid=2437, prio=low)
Jun 28 17:00:02 easyVDR vdr: [2437] SVDRP easyVDR opening port 6419/tcp
Jun 28 17:00:02 easyVDR vdr: [2437] ERROR (svdrp.c,161): Die Adresse wird bereits verwendet
Jun 28 17:00:02 easyVDR vdr: [2437] SVDRP server handler thread ended (pid=2399, tid=2437)
Jun 28 17:00:04 easyVDR rtkit-daemon[884]: Supervising 4 threads of 2 processes of 2 users.
Jun 28 17:00:04 easyVDR rtkit-daemon[884]: Successfully made thread 2438 of process 774 owned by '2000' RT at priority 5.
Jun 28 17:00:04 easyVDR rtkit-daemon[884]: Supervising 5 threads of 2 processes of 2 users.
Jun 28 17:00:04 easyVDR acpid: client 727[0:0] has disconnected
Jun 28 17:00:05 easyVDR vdr: [2399] OSD size changed to 1920x1080 @ 1
Jun 28 17:00:05 easyVDR vdr: [2436] [softhddev]ERROR: Framebuffer is not complete! 8cdd
Jun 28 17:00:05 easyVDR vdr: [2436] [softhddev]ERROR: Framebuffer is not complete! 8cdd
Jun 28 17:00:14 easyVDR acpid: client connected from 727[0:0]
Jun 28 17:00:14 easyVDR acpid: 1 client rule loaded
Jun 28 17:00:15 easyVDR rtkit-daemon[884]: Supervising 4 threads of 2 processes of 2 users.
Jun 28 17:00:15 easyVDR rtkit-daemon[884]: Successfully made thread 2439 of process 774 owned by '2000' RT at priority 5.
Jun 28 17:00:15 easyVDR rtkit-daemon[884]: Supervising 5 threads of 2 processes of 2 users.
Jun 28 17:00:51 easyVDR vdr: [1692] PANIC: watchdog timer expired - exiting!
Jun 28 17:00:56 easyVDR rtkit-daemon[884]: Supervising 4 threads of 2 processes of 2 users.
Jun 28 17:00:56 easyVDR rtkit-daemon[884]: Successfully made thread 2440 of process 774 owned by '2000' RT at priority 5.
Jun 28 17:00:56 easyVDR rtkit-daemon[884]: Supervising 5 threads of 2 processes of 2 users.
Jun 28 17:00:57 easyVDR acpid: client 727[0:0] has disconnected
Jun 28 17:01:01 easyVDR vdr: [2399] saving /var/cache/vdr/cam.data
Jun 28 17:01:01 easyVDR vdr: [2399] stopping plugin: softhddevice
Jun 28 17:01:01 easyVDR vdr: [2399] stopping plugin: easyvdr
Jun 28 17:01:01 easyVDR vdr: [2399] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:01:01 easyVDR vdr: [2436] [softhddev]Cleaning up OpenGL stuff
Jun 28 17:01:01 easyVDR vdr: [2436] [softhddev]OpenGL Worker Thread Ended
Jun 28 17:01:01 easyVDR vdr: [2436] oglThread thread ended (pid=2399, tid=2436)
Jun 28 17:01:01 easyVDR vdr: [2399] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:01:02 easyVDR vdr: [2435] KBD remote control thread ended (pid=2399, tid=2435)
Jun 28 17:01:02 easyVDR vdr: [2399] saved setup to /var/lib/vdr/setup.conf
Jun 28 17:01:02 easyVDR dbus-daemon[786]: [session uid=2000 pid=786] Activating via systemd: service name='org.freedesktop.Tracker1' unit='tracker-store.service' requested by ':1.2' (uid=2000 pid=776 comm="/usr/libexec/tracker-miner-fs " label="unconfined")
Jun 28 17:01:02 easyVDR systemd[767]: Starting Tracker metadata database store and lookup manager...
Jun 28 17:01:02 easyVDR dbus-daemon[786]: [session uid=2000 pid=786] Successfully activated service 'org.freedesktop.Tracker1'
Jun 28 17:01:02 easyVDR systemd[767]: Started Tracker metadata database store and lookup manager.
Jun 28 17:01:02 easyVDR vdr: [2403] device 1 section handler thread ended (pid=2399, tid=2403)
Jun 28 17:01:02 easyVDR vdr: [2402] frontend 0/0 tuner thread ended (pid=2399, tid=2402)
Jun 28 17:01:02 easyVDR dbus-daemon[786]: [session uid=2000 pid=786] Activating via systemd: service name='org.freedesktop.Tracker1.Miner.Extract' unit='tracker-extract.service' requested by ':1.2' (uid=2000 pid=776 comm="/usr/libexec/tracker-miner-fs " label="unconfined")
Jun 28 17:01:02 easyVDR systemd[767]: Starting Tracker metadata extractor...
Jun 28 17:01:02 easyVDR tracker-extract[2451]: Set scheduler policy to SCHED_IDLE
Jun 28 17:01:02 easyVDR tracker-extract[2451]: Setting priority nice level to 19
Jun 28 17:01:02 easyVDR dbus-daemon[786]: [session uid=2000 pid=786] Successfully activated service 'org.freedesktop.Tracker1.Miner.Extract'
Jun 28 17:01:02 easyVDR systemd[767]: Started Tracker metadata extractor.
Jun 28 17:01:03 easyVDR vdr: [2405] device 2 section handler thread ended (pid=2399, tid=2405)
Jun 28 17:01:03 easyVDR vdr: [2404] frontend 1/0 tuner thread ended (pid=2399, tid=2404)
Jun 28 17:01:03 easyVDR vdr: [2399] deleting plugin: softhddevice
Jun 28 17:01:03 easyVDR vdr: video/vdpau: can't destroy output surface: An invalid handle value was provided.
Jun 28 17:01:03 easyVDR acpid: client connected from 727[0:0]
Jun 28 17:01:03 easyVDR acpid: 1 client rule loaded
Jun 28 17:01:03 easyVDR vdr: video/vdpau: can't destroy output surface: An invalid handle value was provided.
Jun 28 17:01:03 easyVDR vdr: message repeated 3 times: [ video/vdpau: can't destroy output surface: An invalid handle value was provided.]
Jun 28 17:01:03 easyVDR vdr: video/vdpau: can't destroy grab render output surface: An invalid handle value was provided.
Jun 28 17:01:03 easyVDR vdr: [2399] deleting plugin: easyvdr
Jun 28 17:01:03 easyVDR vdr: [2399] caught signal 15
Jun 28 17:01:03 easyVDR vdr: [2399] exiting, exit code 0
Jun 28 17:01:04 easyVDR rtkit-daemon[884]: Supervising 4 threads of 2 processes of 2 users.
Jun 28 17:01:04 easyVDR rtkit-daemon[884]: Successfully made thread 2469 of process 774 owned by '2000' RT at priority 5.
Jun 28 17:01:04 easyVDR rtkit-daemon[884]: Supervising 5 threads of 2 processes of 2 users.
Jun 28 17:01:12 easyVDR systemd[767]: tracker-extract.service: Succeeded.
Jun 28 17:01:32 easyVDR tracker-store[2444]: OK
Jun 28 17:01:32 easyVDR systemd[767]: tracker-store.service: Succeeded.
VDR Startet, wie bei Stefan mit Blackscreen. Keine Bedienung/Bild/Ton möglich. Nach einem gewissen Moment hab ich dann an der Konsole "killall vdr" eingegeben.


Ich denke mal, da warten wir auf ein vernünftiges SoftHDDevice von Wolfgang und testen nochmal.

PS: Prügel ich das Ganze in den Upstart, habe ich nach einem Reboot ein Frontend mit Bild + Ton, aber ohne Bedienung, also muss es ja durch das Plugin easyvdr geladen werden.


Gruß Aaron
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#63
(28.06.2020, 17:04)SurfaceCleanerZ schrieb: Ton kommt natürlich nicht, da der Parameter für softhddevice ja falsch ist!
Nimm mal die Parameter:
Code:
-f  -v vdpau -d :0  -a default    -w alsa-driver-broken
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#64
Hi,
sorry nach upgrade fehlte reboot, s. update in vorigem Post. Es läuft, allerdings mit irgendeinem Stand vom lnj softhddevice, da ich den branch nicht gewählt hab.
Deshalb wohl die hwaccel Fehler!

MfG,
Stefan
Test-VDR1: HP rp5700 Fertigsystem, Core2Duo E6400, 2GB RAM, Mygica t230 Stick als Tuner, nvidia Slim-GT218 512MB PCIe x1     -   v3.5-64
VDR2 in Rente
VDR3 in Rente
VDR4: MSI G31M2 v2, Intel E5200, 6" t6963c gLCD, 2GB, WD Red 4TB, 2x TT3200, ASUS GT730-SL-2GD3-BRK, mod. Digitainergeh.       -   v3.5-64
VDR5: GIGABYTE GA-G31M-S2L, Intel E5200, GT630 passiv, 2GB, 3TB, 6"  t6963c gLCD, mod. Digitainergeh.          -   v3.5-64
VDR6: MSI MS-7236, Intel E2140, GT630 passiv, 2GB, WD Green 2TB, 6" t6963c gLCD, 2x TT3200    -    v2.5-64
Hilfe gefällig? Dann brauchen wir ein easyInfo aus easyPortal!
Zitieren
#65
Zweiter Versuch:
Upstart vollständig gekillt, dann nochmal:
Zitat:[email protected]:~$ /usr/bin/vdr -Peasyvdr
void cEasyPluginManager::Initialize():212 : *** begin avail plugins ***
void cEasyPluginManager::Initialize():229 : control
void cEasyPluginManager::Initialize():229 : softhddevice
void cEasyPluginManager::Initialize():229 : xineliboutput
void cEasyPluginManager::Initialize():232 : *** end avail plugins ***
bool cEasyPluginManager::AutoLoad():93 : control: no auto load
bool cEasyPluginManager::AutoLoad():93 : xineliboutput: no auto load
..und..
Zitat:Jun 28 17:29:13 easyVDR vdr: [2916] VDR version 2.4.1 started
Jun 28 17:29:13 easyVDR vdr: [2916] codeset is 'UTF-8' - known
Jun 28 17:29:13 easyVDR vdr: [2916] found 28 locales in /usr/share/locale
Jun 28 17:29:13 easyVDR vdr: [2916] loading plugin: /usr/lib/vdr/plugins/libvdr-easyvdr.so.2.4.1
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/setup.conf
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: ChannelBlocker = 0
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: DumpNaluFill = 0
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: SupportTeletext = 0
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: WarEagleIcons = 1
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: ZapcockpitHideLastGroup = 0
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: ZapcockpitShowAllChannels = 0
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: ZapcockpitUseGroups = 1
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: ZapcockpitUseHints = 1
Jun 28 17:29:13 easyVDR vdr: [2916] ERROR: unknown config parameter: ZapcockpitUseInfo = 1
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/sources.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/diseqc.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/scr.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/channels.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/timers.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/commands.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/reccmds.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/svdrphosts.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/remote.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/keymacros.conf
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/camresponses.conf
Jun 28 17:29:13 easyVDR vdr: [2917] video directory scanner thread started (pid=2916, tid=2917, prio=low)
Jun 28 17:29:13 easyVDR vdr: [2916] registered source parameters for 'A - ATSC'
Jun 28 17:29:13 easyVDR vdr: [2916] registered source parameters for 'C - DVB-C'
Jun 28 17:29:13 easyVDR vdr: [2916] registered source parameters for 'S - DVB-S'
Jun 28 17:29:13 easyVDR vdr: [2916] registered source parameters for 'T - DVB-T'
Jun 28 17:29:13 easyVDR vdr: [2917] video directory scanner thread ended (pid=2916, tid=2917)
Jun 28 17:29:13 easyVDR vdr: [2916] detected /dev/dvb/adapter1/frontend0
Jun 28 17:29:13 easyVDR vdr: [2918] epg data reader thread started (pid=2916, tid=2918, prio=high)
Jun 28 17:29:13 easyVDR vdr: [2916] detected /dev/dvb/adapter0/frontend0
Jun 28 17:29:13 easyVDR vdr: [2918] reading EPG data from /var/cache/vdr/epg.data
Jun 28 17:29:13 easyVDR vdr: [2916] probing /dev/dvb/adapter0/frontend0
Jun 28 17:29:13 easyVDR vdr: [2916] creating cDvbDevice
Jun 28 17:29:13 easyVDR vdr: [2916] new device number 1 (card index 1)
Jun 28 17:29:13 easyVDR vdr: [2916] DVB API version is 0x050B (VDR was built with 0x050B)
Jun 28 17:29:13 easyVDR vdr: [2916] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24120/CX24118")
Jun 28 17:29:13 easyVDR vdr: [2916] cTimeMs: using monotonic clock (resolution is 1 ns)
Jun 28 17:29:13 easyVDR vdr: [2916] probing /dev/dvb/adapter1/frontend0
Jun 28 17:29:13 easyVDR vdr: [2916] creating cDvbDevice
Jun 28 17:29:13 easyVDR vdr: [2916] new device number 2 (card index 2)
Jun 28 17:29:13 easyVDR vdr: [2921] device 1 section handler thread started (pid=2916, tid=2921, prio=low)
Jun 28 17:29:13 easyVDR vdr: [2920] frontend 0/0 tuner thread started (pid=2916, tid=2920, prio=high)
Jun 28 17:29:13 easyVDR vdr: [2916] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24120/CX24118")
Jun 28 17:29:13 easyVDR vdr: [2916] found 2 DVB devices
Jun 28 17:29:13 easyVDR vdr: [2916] initializing plugin: easyvdr (2020.06.28): easyvdr setup helper plugin
Jun 28 17:29:13 easyVDR vdr: [2916] loading plugin: /usr/lib/vdr/plugins/libvdr-softhddevice.so.2.4.1
Jun 28 17:29:13 easyVDR vdr: [2923] frontend 1/0 tuner thread started (pid=2916, tid=2923, prio=high)
Jun 28 17:29:13 easyVDR vdr: [2924] device 2 section handler thread started (pid=2916, tid=2924, prio=low)
Jun 28 17:29:13 easyVDR vdr: [2918] epg data reader thread ended (pid=2916, tid=2918)
Jun 28 17:29:13 easyVDR vdr: [2916] initializing plugin: softhddevice (0.7.0-GITaa9fd0e): Ein Software und GPU emulieres HD-Gerät
Jun 28 17:29:13 easyVDR vdr: [2916] new device number 3 (card index 3)
Jun 28 17:29:13 easyVDR vdr: [2916] setting primary device to 3
Jun 28 17:29:13 easyVDR vdr: [2916] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:29:13 easyVDR vdr: [2916] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:29:13 easyVDR vdr: [2916] assuming manual start of VDR
Jun 28 17:29:13 easyVDR vdr: [2916] skin "anthra_1920_OS9" not available - using "lcars" instead
Jun 28 17:29:13 easyVDR vdr: [2916] loading /var/lib/vdr/themes/lcars-default.theme
Jun 28 17:29:13 easyVDR vdr: [2916] starting plugin: easyvdr
Jun 28 17:29:13 easyVDR vdr: [2916] starting plugin: softhddevice
Jun 28 17:29:13 easyVDR vdr: audio: 'alsa' output module used
Jun 28 17:29:13 easyVDR vdr: audio/alsa: supports pause: yes
Jun 28 17:29:15 easyVDR vdr: audio: 44100Hz supports 1 2 3 4 5 6 7 8 channels
Jun 28 17:29:15 easyVDR vdr: audio: 48000Hz supports 1 2 3 4 5 6 7 8 channels
Jun 28 17:29:15 easyVDR vdr: audio: 192000Hz supports 1 2 3 4 5 6 7 8 channels
Jun 28 17:29:15 easyVDR vdr: video/vdpau: VDPAU API version: 1
Jun 28 17:29:15 easyVDR vdr: video/vdpau: VDPAU information: NVIDIA VDPAU Driver Shared Library 340.108 Wed Dec 11 14:31:24 PST 2019
Jun 28 17:29:15 easyVDR vdr: video/vdpau: highest supported high quality scaling 1
Jun 28 17:29:15 easyVDR vdr: video/vdpau: feature deinterlace temporal supported
Jun 28 17:29:15 easyVDR vdr: video/vdpau: feature deinterlace temporal spatial supported
Jun 28 17:29:15 easyVDR vdr: video/vdpau: attribute skip chroma deinterlace supported
Jun 28 17:29:15 easyVDR vdr: video/vdpau: 4:2:0 chroma format with 4096x4096 supported
Jun 28 17:29:15 easyVDR vdr: video/vdpau: 4:2:2 chroma format with 4096x4096 supported
Jun 28 17:29:15 easyVDR vdr: video/vdpau: 8bit BGRA format with 16384x16384 supported
Jun 28 17:29:15 easyVDR vdr: video/vdpau: 10bit RGBA format with 16384x16384 supported
Jun 28 17:29:15 easyVDR vdr: video/vdpau: created osd output surface 1920x1080 with id 0x00000009
Jun 28 17:29:15 easyVDR vdr: [softhddev] ready
Jun 28 17:29:15 easyVDR vdr: [2916] skin "anthra_1920_OS9" not available - using "lcars" instead
Jun 28 17:29:15 easyVDR vdr: [2916] loading /var/lib/vdr/themes/lcars-default.theme
Jun 28 17:29:15 easyVDR vdr: [2916] remote control XKeySym - keys known
Jun 28 17:29:15 easyVDR vdr: [2916] remote control LIRC - keys known
Jun 28 17:29:15 easyVDR vdr: [2916] remote control KBD - keys known
Jun 28 17:29:15 easyVDR vdr: [2916] loading /var/cache/vdr/cam.data
Jun 28 17:29:15 easyVDR vdr: [2916] switching to channel 1 S19.2E-1-1019-10301 (Das Erste HD)
Jun 28 17:29:15 easyVDR vdr: [2956] SVDRP server handler thread started (pid=2916, tid=2956, prio=low)
Jun 28 17:29:15 easyVDR vdr: [2956] SVDRP easyVDR opening port 6419/tcp
Jun 28 17:29:15 easyVDR vdr: [2956] SVDRP easyVDR listening on port 6419/tcp
Jun 28 17:29:15 easyVDR vdr: [2955] device 1 receiver thread started (pid=2916, tid=2955, prio=high)
Jun 28 17:29:15 easyVDR vdr: [2953] LIRC remote control thread started (pid=2916, tid=2953, prio=high)
Jun 28 17:29:15 easyVDR vdr: [2957] device 1 TS buffer thread started (pid=2916, tid=2957, prio=high)
Jun 28 17:29:15 easyVDR vdr: [2954] KBD remote control thread started (pid=2916, tid=2954, prio=high)
Jun 28 17:29:15 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:29:15 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:29:15 easyVDR vdr: [2916] OSD size changed to 1920x1080 @ 1
Jun 28 17:29:15 easyVDR vdr: [2916] [softhddev]Trying to start OpenGL Worker Thread
Jun 28 17:29:15 easyVDR vdr: [2959] oglThread thread started (pid=2916, tid=2959, prio=high)
Jun 28 17:29:15 easyVDR vdr: [2959] [softhddev]OpenGL using display :0
Jun 28 17:29:15 easyVDR vdr: video/vdpau: created osd output surface 1918x1055 with id 0x00000009
Jun 28 17:29:15 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:29:15 easyVDR vdr: [2959] [softhddev]OpenGL Context initialized
Jun 28 17:29:15 easyVDR vdr: [2959] [softhddev]Shaders initialized
Jun 28 17:29:15 easyVDR vdr: [2959] [softhddev]vdpau interop initialized
Jun 28 17:29:15 easyVDR vdr: [2959] [softhddev]Vertex buffers initialized
Jun 28 17:29:15 easyVDR vdr: [2959] [softhddev]Maximum Pixmap size: 16384x16384px
Jun 28 17:29:15 easyVDR vdr: [2916] [softhddev]OpenGL Worker Thread successfully started
Jun 28 17:29:15 easyVDR vdr: [2959] [softhddev]Cleaning up OpenGL stuff
Jun 28 17:29:15 easyVDR vdr: [2959] [softhddev]OpenGL Worker Thread Ended
Jun 28 17:29:15 easyVDR vdr: [2959] oglThread thread ended (pid=2916, tid=2959)
Jun 28 17:29:15 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:29:15 easyVDR vdr: [2958] OSD size changed to 1918x1055 @ 0,97787
Jun 28 17:29:15 easyVDR vdr: video/vdpau: created osd output surface 1920x1080 with id 0x00000009
Jun 28 17:29:15 easyVDR vdr: audio/alsa: using device 'default'
Jun 28 17:29:15 easyVDR vdr: video: get hwaccel context, not supported
Jun 28 17:29:15 easyVDR vdr: audio/alsa: start delay 336ms
Jun 28 17:29:16 easyVDR vdr: [2921] changing pids of channel 12 (arte HD) from 5111+5111=27:[email protected],[email protected],[email protected];[email protected]:5115=deu,5118=fra,5119=deu:5114 to 5111+5111=27:[email protected],[email protected],[email protected],[email protected]:5115=deu,5118=fra,5119=deu:5114
Jun 28 17:29:17 easyVDR vdr: video/vdpau: synced after 65 frames
Jun 28 17:30:11 easyVDR vdr: [2956] SVDRP easyVDR < 127.0.0.1:35992 client connection accepted
Jun 28 17:30:11 easyVDR vdr: [2956] SVDRP easyVDR > 127.0.0.1:35992 server created
Jun 28 17:30:11 easyVDR vdr: [2956] SVDRP easyVDR < 127.0.0.1:35992 connection closed
Jun 28 17:30:11 easyVDR vdr: [2956] SVDRP easyVDR < 127.0.0.1:35992 server destroyed
Jun 28 17:30:11 easyVDR easyvdr-program-changer[2963]: 220 easyVDR SVDRP VideoDiskRecorder 2.4.1; Sun Jun 28 17:30:11 2020; UTF-8
Jun 28 17:30:11 easyVDR easyvdr-program-changer[2963]: 250 Remote control disabled
Jun 28 17:30:11 easyVDR easyvdr-program-changer[2963]: 221 easyVDR closing connection
Jun 28 17:30:16 easyVDR vdr: video: 0:17:47.275 +16 270 0/\ms 61+1+4 v-buf
Jun 28 17:30:20 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:20 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:20 easyVDR vdr: [2958] OSD size changed to 1920x1080 @ 1
Jun 28 17:30:20 easyVDR vdr: video/vdpau: created osd output surface 1918x1055 with id 0x00000009
Jun 28 17:30:21 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:21 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:21 easyVDR vdr: [2958] OSD size changed to 1918x1055 @ 0,97787
Jun 28 17:30:21 easyVDR vdr: video/vdpau: created osd output surface 1915x1049 with id 0x00000009
Jun 28 17:30:21 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:21 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:21 easyVDR vdr: [2958] OSD size changed to 1915x1049 @ 0,973832
Jun 28 17:30:21 easyVDR vdr: video/vdpau: created osd output surface 1902x1027 with id 0x00000009
Jun 28 17:30:21 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:21 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:21 easyVDR vdr: [2958] OSD size changed to 1902x1027 @ 0,959925
Jun 28 17:30:21 easyVDR vdr: video/vdpau: created osd output surface 1796x942 with id 0x00000009
Jun 28 17:30:21 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:21 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:21 easyVDR vdr: [2958] OSD size changed to 1796x942 @ 0,932442
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1658x846 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1658x846 @ 0,907117
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1606x812 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1606x812 @ 0,898852
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1500x742 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1500x742 @ 0,879407
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1476x722 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1476x722 @ 0,869618
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1382x658 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1382x658 @ 0,846438
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1362x646 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1362x646 @ 0,843204
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1340x634 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1340x634 @ 0,841128
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1324x622 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1324x622 @ 0,83518
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1300x608 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1300x608 @ 0,831453
Jun 28 17:30:22 easyVDR vdr: video/vdpau: created osd output surface 1282x596 with id 0x00000009
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:22 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:22 easyVDR vdr: [2958] OSD size changed to 1282x596 @ 0,826486
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1266x586 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1266x586 @ 0,822889
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1240x567 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1240x567 @ 0,812903
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1231x560 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1231x560 @ 0,808737
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1197x530 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1197x530 @ 0,787153
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1196x529 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1196x529 @ 0,786325
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1195x528 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1195x528 @ 0,785495
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1189x524 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1189x524 @ 0,783478
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1142x511 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1142x511 @ 0,795486
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1088x497 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1088x497 @ 0,812092
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1058x489 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1058x489 @ 0,821676
Jun 28 17:30:23 easyVDR vdr: audio/alsa: using device 'default'
Jun 28 17:30:23 easyVDR vdr: audio/alsa: start delay 336ms
Jun 28 17:30:23 easyVDR vdr: [2955] ERROR: 1 TS packet(s) not accepted in Transfer Mode
Jun 28 17:30:23 easyVDR vdr: video/vdpau: created osd output surface 1032x485 with id 0x00000009
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:23 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:23 easyVDR vdr: [2958] OSD size changed to 1032x485 @ 0,835487
Jun 28 17:30:23 easyVDR vdr: audio/alsa: using device 'default'
Jun 28 17:30:23 easyVDR vdr: audio/alsa: start delay 336ms
Jun 28 17:30:24 easyVDR vdr: video/vdpau: created osd output surface 1000x475 with id 0x00000009
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:24 easyVDR vdr: [2958] OSD size changed to 1000x475 @ 0,844444
Jun 28 17:30:24 easyVDR vdr: audio/alsa: using device 'default'
Jun 28 17:30:24 easyVDR vdr: audio/alsa: start delay 336ms
Jun 28 17:30:24 easyVDR vdr: video/vdpau: created osd output surface 972x469 with id 0x00000009
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:24 easyVDR vdr: [2958] OSD size changed to 972x469 @ 0,857796
Jun 28 17:30:24 easyVDR vdr: video/vdpau: created osd output surface 950x463 with id 0x00000009
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:24 easyVDR vdr: [2958] OSD size changed to 950x463 @ 0,866433
Jun 28 17:30:24 easyVDR vdr: audio/alsa: using device 'default'
Jun 28 17:30:24 easyVDR vdr: audio/alsa: start delay 336ms
Jun 28 17:30:24 easyVDR vdr: video/vdpau: created osd output surface 909x450 with id 0x00000009
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:24 easyVDR vdr: [2958] OSD size changed to 909x450 @ 0,880088
Jun 28 17:30:24 easyVDR vdr: audio/alsa: using device 'default'
Jun 28 17:30:24 easyVDR vdr: audio/alsa: start delay 336ms
Jun 28 17:30:24 easyVDR vdr: video/vdpau: created osd output surface 907x450 with id 0x00000009
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]stopping OpenGL Worker Thread
Jun 28 17:30:24 easyVDR vdr: [2958] [softhddev]OpenGL Worker Thread stopped
Jun 28 17:30:24 easyVDR vdr: [2958] OSD size changed to 907x450 @ 0,882029
Jun 28 17:30:24 easyVDR vdr: video/vdpau: created osd output surface 905x449 with id 0x00000009
Jun 28 17:30:24 easyVDR vdr: video/vdpau: missed frame (1/3189)
Jun 28 17:30:25 easyVDR vdr: video/vdpau: synced after 49 frames
Jetzt ist Bild und Ton da, allerdings kann ich nicht bedienen. Big Grin
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#66
Hier kann ich gerade nicht helfen.



Was wir hier zuerst benötigen: ein softhddevice mit einem Satz Commandline arguments, die mit einem Standard VDR (d.h. direkter Start ohne mein Plugin..) funktionieren.
Wenn wir das haben, dann können wir weiter machen.

Klingt immer einfacher als es ist, aber bei mir läuft softhddevice vom Plugin 'easyvdr' gestartet problemlos und ohne Ruckeln. Startet blitzschnell.
Menü lässt sich bedienen, Umschalten etc.

Wir brauchen das als Basis, um das easyvdr Plugin für alle zum Laufen zu bekommen.
Zitieren
#67
@ Aaron: hast du eine funktionierende remote.conf?
Sonst steckt vdr beim Anlernen der keys, ohne dass man es in softhddevice sieht.
Zitieren
#68
Hi,
ich hatte letzte Woche keine remote.conf und da kam Dialog zum Keyboard anlernen mit softhddevice!

Also erst mal mit Keyboard versuchen.

Ton bekomm ich auch mit Aarons Config nicht zustande...

MfG,
Stefan
Test-VDR1: HP rp5700 Fertigsystem, Core2Duo E6400, 2GB RAM, Mygica t230 Stick als Tuner, nvidia Slim-GT218 512MB PCIe x1     -   v3.5-64
VDR2 in Rente
VDR3 in Rente
VDR4: MSI G31M2 v2, Intel E5200, 6" t6963c gLCD, 2GB, WD Red 4TB, 2x TT3200, ASUS GT730-SL-2GD3-BRK, mod. Digitainergeh.       -   v3.5-64
VDR5: GIGABYTE GA-G31M-S2L, Intel E5200, GT630 passiv, 2GB, 3TB, 6"  t6963c gLCD, mod. Digitainergeh.          -   v3.5-64
VDR6: MSI MS-7236, Intel E2140, GT630 passiv, 2GB, WD Green 2TB, 6" t6963c gLCD, 2x TT3200    -    v2.5-64
Hilfe gefällig? Dann brauchen wir ein easyInfo aus easyPortal!
Zitieren
#69
Hi Wirbel
(28.06.2020, 17:47)Wirbel schrieb: @ Aaron: hast du eine funktionierende remote.conf?
Sonst steckt vdr beim Anlernen der keys, ohne dass man es in softhddevice sieht.
Ich hab mal auf Xineliboutput umgestellt und hier läuft alles, also liegts am Softhddevice. Müssen wir erstmal auf Wolfgangs Fertigstellung warten und nochmal testen.


Gruß Aaron
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#70
Hi Wirbel, 

Wenn keine <<pluginname>>_settings.ini existiert, kann ich zB das plugin control trotzdem im Menü starten/stoppen ( Taste rot/grün ) , allerdings kann ich nicht auf autoload aktiv setzen, da ja die ini nicht existiert. Automatisch wird da keine ini generiert, richtig?

Gruß Aaron
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#71
(28.06.2020, 18:24)gb schrieb: Hi Wirbel, 

Wenn keine <<pluginname>>_settings.ini existiert, kann ich zB das plugin control trotzdem im Menü starten/stoppen ( Taste rot/grün ) , allerdings kann ich nicht auf autoload aktiv setzen, da ja die ini nicht existiert. Automatisch wird da keine ini generiert, richtig?

Gruß Aaron


Wenn keine <<pluginname>>_settings.ini existiert, oder eine solche existiert, dann habe ich gilt folgendes:

AutoRun = false
Stop = true
Args = ""

Wenn du über das Menü die Einstellungen eines solchen Plugins editierst und speicherst, dann wird immer eine neue ini angelegt,
welche in alphabetischer Reihenfolge die Sektionen sortiert und in diesen Sektionen alphabetisch die Einträge speichert.
Zitieren
#72
Also beim Beispiel control wird keine control_settings.ini erstellt, wenn nicht vorhanden, kann ich nichts ändern. Wenn control_settings.ini vorhanden, dann kann ich ändern.
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren
#73
Die Zukunft zum Bearbeiten der per Plugin ini files wäre das neue tool "easyvdrctl-$(APIVERSION)", wobei APIVERSION dasnn 2.4.1, 2.4.2, 2.2.0, ...
Zitieren
#74
(28.06.2020, 18:58)gb schrieb: Also beim Beispiel control wird keine control_settings.ini erstellt, wenn nicht vorhanden, kann ich nichts ändern. Wenn control_settings.ini vorhanden, dann kann ich ändern.


Das wäre ein bug für mich - und zu verbessern.

Korrekt wäre :
- wenn keine control_settings.ini vorhanden: es gelten die DEFAULTS (Stop=true, AutoRun=false, Args="")
- Speichern legt *immer* eine neue control_settings.ini an.

Falls das jetzt noch nicht funktioniert - bitte Feedback an mich. Dann muss ich da ran - bitte details angeben.
Zitieren
#75
Hi Wirbel
Big Grin Details angeben hat mir gefallen.
(28.06.2020, 19:03)Wirbel schrieb: - Speichern legt *immer* eine neue control_settings.ini an.
Was heißt für dich "speichern" <-nach dem Ändern Taste OK, man befindet sich wieder in der Übersicht aller Plugins. Geht man nun zB wieder in die Optionen von Plugin control, ist wieder alles weg.
Spiel das mal am besten nach, control_settings.ini löschen, dann vdr starten und Einstellungen von control versuchen zu ändern.

Gruß Aaron
Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel® G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

Zitieren


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste