Source: ../../libcomm/comm_api.h
|
|
|
|
/* -*- Mode:C; c-basic-offset:4; tab-width:8; indent-tabs-mode:t -*- */
/* vim:set sts=4 ts=8: */
/*
* Copyright (c) 2001
* YOID Project.
* University of Southern California/Information Sciences Institute.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* $XORP: xorp/libcomm/comm_api.h,v 1.22 2006/03/01 12:55:33 bms Exp $
*/
#ifndef __LIBCOMM_COMM_API_H__
#define __LIBCOMM_COMM_API_H__
/*
* COMM socket library API header.
*/
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
/*
* Constants definitions
*/
#define SO_RCV_BUF_SIZE_MIN (48*1024) /* min. rcv socket buf size */
#define SO_RCV_BUF_SIZE_MAX (256*1024) /* desired rcv socket buf size */
#define SO_SND_BUF_SIZE_MIN (48*1024) /* min. snd socket buf size */
#define SO_SND_BUF_SIZE_MAX (256*1024) /* desired snd socket buf size */
#define COMM_SOCK_ADDR_PORT_REUSE 1
#define COMM_SOCK_ADDR_PORT_DONTREUSE 0
#define COMM_SOCK_BLOCKING 1
#define COMM_SOCK_NONBLOCKING 0
#ifndef AF_LOCAL
#define AF_LOCAL AF_UNIX /* XXX: AF_UNIX is the older name */
#endif
/*
* Structures, typedefs and macros
*/
#ifndef HTONS
#define HTONS(x) ((x) = htons((u_short)(x)))
#endif
#ifndef NTOHS
#define NTOHS(x) ((x) = ntohs((u_short)(x)))
#endif
#ifndef HTONL
#define HTONL(x) ((x) = htonl((u_long)(x)))
#endif
#ifndef NTOHL
#define NTOHL(x) ((x) = ntohl((u_long)(x)))
#endif
/*
* Global variables
*/
/*
* Global functions prototypes
*/
__BEGIN_DECLS
/*
* The high-level `user' API.
*/
/**
* Init stuff. Need to be called only once (during startup).
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_init(void);
/**
* Finalization. Must be called when client is finished with the library.
*/
extern void comm_exit(void);
/**
* Retrieve the most recently occured error for the current thread.
*
* @return Operating system specific error code for this thread's
* last socket operation.
*/
extern int comm_get_last_error(void);
/**
* Retrieve a human readable string (in English) for the given error code.
*
* @param serrno the socket error number returned by comm_get_last_error().
* @return Pointer to a string giving more information about the error.
*/
extern char const * comm_get_error_str(int serrno);
/**
* Retrieve a human readable string (in English) for the last error.
*
* @return a human readable string of the last error.
*/
extern char const *comm_get_last_error_str(void);
/**
* Indicate presence of IPv4 support.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_ipv4_present(void);
/**
* Indicate presence of IPv6 support.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_ipv6_present(void);
/**
* Open a TCP socket.
*
* @param family the address family.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @return the new socket on success, otherwsise XORP_BAD_SOCKET.
*/
extern xsock_t comm_open_tcp(int family, int is_blocking);
/**
* Open an UDP socket.
*
* @param family the address family.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @return the new socket on success, otherwsise XORP_BAD_SOCKET.
*/
extern xsock_t comm_open_udp(int family, int is_blocking);
/**
* Close a socket.
*
* @param sock the socket to close.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_close(xsock_t sock);
/**
* Open an IPv4 TCP socket and bind it to a local address and a port.
*
* @param my_addr the local IPv4 address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the local port to bind to (in network order).
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_tcp4(const struct in_addr *my_addr,
unsigned short my_port, int is_blocking);
/**
* Open an IPv6 TCP socket and bind it to a local address and a port.
*
* @param my_addr the local IPv6 address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the local port to bind to (in network order).
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_tcp6(const struct in6_addr *my_addr,
unsigned short my_port, int is_blocking);
/**
* Open a TCP (IPv4 or IPv6) socket and bind it to a local address and a port.
*
* @param sin agnostic sockaddr containing the local address (If it is
* NULL, will bind to `any' local address.) and the local port to
* bind to all in network order.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_tcp(const struct sockaddr *sin, int is_blocking);
/**
* Open an IPv4 UDP socket and bind it to a local address and a port.
*
* @param my_addr the local IPv4 address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the local port to bind to (in network order).
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_udp4(const struct in_addr *my_addr,
unsigned short my_port, int is_blocking);
/**
* Open an IPv6 UDP socket and bind it to a local address and a port.
*
* @param my_addr the local IPv6 address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the local port to bind to (in network order).
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_udp6(const struct in6_addr *my_addr,
unsigned short my_port, int is_blocking);
/**
* Open an IPv4 UDP socket on an interface, bind it to a port,
* and join a multicast group.
*
* Note that we bind to ANY address instead of the multicast address
* only. If we bind to the multicast address instead, then using
* the same socket for sending multicast packets will trigger a bug
* in the FreeBSD kernel: the source IP address will be set to the
* multicast address. Hence, the application itself may want to filter
* the UDP unicast packets that may have arrived with a destination address
* one of the local interface addresses and the same port number.
*
* @param mcast_addr the multicast address to join.
*
* @param join_if_addr the local unicast interface address (in network order)
* to join the multicast group on. If it is NULL, the system will choose the
* interface each time a datagram is sent.
*
* @param my_port the port to bind to (in network order).
*
* @param reuse_flag if true, allow other sockets to bind to the same multicast
* address and port, otherwise disallow it.
*
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
*
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_join_udp4(const struct in_addr *mcast_addr,
const struct in_addr *join_if_addr,
unsigned short my_port,
int reuse_flag, int is_blocking);
/**
* Open an IPv6 UDP socket on an interface, bind it to a port,
* and join a multicast group.
*
* Note that we bind to ANY address instead of the multicast address
* only. If we bind to the multicast address instead, then using
* the same socket for sending multicast packets will trigger a bug
* in the FreeBSD kernel: the source IP address will be set to the
* multicast address. Hence, the application itself may want to filter
* the UDP unicast packets that may have arrived with a destination address
* one of the local interface addresses and the same port number.
*
* @param mcast_addr the multicast address to join.
*
* @param join_if_index the local unicast interface index to join the multicast
* group on. If it is 0, the system will choose the interface each time a
* datagram is sent.
*
* @param my_port the port to bind to (in network order).
*
* @param reuse_flag if true, allow other sockets to bind to the same multicast
* address and port, otherwise disallow it.
*
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
*
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_join_udp6(const struct in6_addr *mcast_addr,
unsigned int join_if_index,
unsigned short my_port,
int reuse_flag, int is_blocking);
/**
* Open an IPv4 TCP socket, and connect it to a remote address and port.
*
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is the new socket. If the non-blocking socket was connected,
* the referenced value is set to 0. If the return value is XORP_BAD_SOCKET
* or if the socket is blocking, then the return value is undefined.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_connect_tcp4(const struct in_addr *remote_addr,
unsigned short remote_port,
int is_blocking,
int *in_progress);
/**
* Open an IPv6 TCP socket, and connect it to a remote address and port.
*
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is the new socket. If the non-blocking socket was connected,
* the referenced value is set to 0. If the return value is XORP_BAD_SOCKET
* or if the socket is blocking, then the return value is undefined.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_connect_tcp6(const struct in6_addr *remote_addr,
unsigned short remote_port,
int is_blocking,
int *in_progress);
/**
* Open an IPv4 UDP socket, and connect it to a remote address and port.
*
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is the new socket. If the non-blocking socket was connected,
* the referenced value is set to 0. If the return value is XORP_BAD_SOCKET
* or if the socket is blocking, then the return value is undefined.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_connect_udp4(const struct in_addr *remote_addr,
unsigned short remote_port,
int is_blocking,
int *in_progress);
/**
* Open an IPv6 UDP socket, and connect it to a remote address and port.
*
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is the new socket. If the non-blocking socket was connected,
* the referenced value is set to 0. If the return value is XORP_BAD_SOCKET
* or if the socket is blocking, then the return value is undefined.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_connect_udp6(const struct in6_addr *remote_addr,
unsigned short remote_port,
int is_blocking,
int *in_progress);
/**
* Open an IPv4 UDP socket, bind it to a local address and a port,
* and connect it to a remote address and port.
*
* @param local_addr the local address to bind to.
* If it is NULL, will bind to `any' local address.
* @param local_port the local port to bind to.
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is the new socket. If the non-blocking socket was connected,
* the referenced value is set to 0. If the return value is XORP_BAD_SOCKET
* or if the socket is blocking, then the return value is undefined.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_connect_udp4(const struct in_addr *local_addr,
unsigned short local_port,
const struct in_addr *remote_addr,
unsigned short remote_port,
int is_blocking,
int *in_progress);
/**
* Open an IPv6 UDP socket, bind it to a local address and a port,
* and connect it to a remote address and port.
*
* @param local_addr the local address to bind to.
* If it is NULL, will bind to `any' local address.
* @param local_port the local port to bind to.
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is the new socket. If the non-blocking socket was connected,
* the referenced value is set to 0. If the return value is XORP_BAD_SOCKET
* or if the socket is blocking, then the return value is undefined.
* @return the new socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_bind_connect_udp6(const struct in6_addr *local_addr,
unsigned short local_port,
const struct in6_addr *remote_addr,
unsigned short remote_port,
int is_blocking,
int *in_progress);
/*
* The low-level `sock' API.
*/
/**
* Open a socket of domain = @ref domain, type = @ref type,
* protocol = @protocol, and blocking = @blocking.
*
* The sending and receiving buffer size are set, and the socket
* itself is set with TCP_NODELAY (if a TCP socket).
*
* @param domain the domain of the socket (e.g., AF_INET, AF_INET6).
* @param type the type of the socket (e.g., SOCK_STREAM, SOCK_DGRAM).
* @param protocol the particular protocol to be used with the socket.
* @param is_blocking if true then the socket will be blocking, otherwise
* non-blocking.
* @return the open socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_sock_open(int domain, int type, int protocol,
int is_blocking);
/**
* Create a pair of connected sockets.
*
* The sockets will be created in the blocking state by default, and
* with no additional socket options set.
*
* Currently a domain of AF_UNIX and a type of SOCK_STREAM must be
* specified. On Windows platforms, the sockets created will actually
* be in the AF_INET domain.
*
* @param domain the domain of the socket (e.g., AF_INET, AF_INET6).
* @param type the type of the socket (e.g., SOCK_STREAM, SOCK_DGRAM).
* @param protocol the particular protocol to be used with the socket.
* @param sv pointer to an array of two xsock_t handles to receive the
* allocated socket pair.
*
* @return XORP_OK if the socket pair was created, otherwise if any error
* is encountered, XORP_ERROR.
**/
extern int comm_sock_pair(int domain, int type, int protocol,
xsock_t sv[2]);
/**
* Bind an IPv4 socket to an address and a port.
*
* @param sock the socket to bind.
* @param my_addr the address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the port to bind to (in network order).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_bind4(xsock_t sock, const struct in_addr *my_addr,
unsigned short my_port);
/**
* Bind an IPv6 socket to an address and a port.
*
* @param sock the socket to bind.
* @param my_addr the address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the port to bind to (in network order).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_bind6(xsock_t sock, const struct in6_addr *my_addr,
unsigned short my_port);
/**
* Bind a socket (IPv4 or IPv6) to an address and a port.
*
* @param sock the socket to bind.
* @param sin agnostic sockaddr containing the local address (If it is
* NULL, will bind to `any' local address.) and the local port to
* bind to all in network order.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_bind(xsock_t sock, const struct sockaddr *sin);
/**
* Join an IPv4 multicast group on a socket (and an interface).
*
* @param sock the socket to join the group.
* @param mcast_addr the multicast address to join.
* @param my_addr the local unicast address of an interface to join.
* If it is NULL, the interface is chosen by the kernel.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_join4(xsock_t sock,
const struct in_addr *mcast_addr,
const struct in_addr *my_addr);
/**
* Join an IPv6 multicast group on a socket (and an interface).
*
* @param sock he socket to join the group.
* @param mcast_addr the multicast address to join.
* @param my_ifindex the local unicast interface index to join.
* If it is 0, the interface is chosen by the kernel.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_join6(xsock_t sock,
const struct in6_addr *mcast_addr,
unsigned int my_ifindex);
/**
* Leave an IPv4 multicast group on a socket (and an interface).
*
* @param sock the socket to leave the group.
* @param mcast_addr the multicast address to leave.
* @param my_addr the local unicast address of an interface to leave.
* If it is NULL, the interface is chosen by the kernel.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_leave4(xsock_t sock,
const struct in_addr *mcast_addr,
const struct in_addr *my_addr);
/**
* Leave an IPv6 multicast group on a socket (and an interface).
*
* @param sock he socket to leave the group.
* @param mcast_addr the multicast address to leave.
* @param my_ifindex the local unicast interface index to leave.
* If it is 0, the interface is chosen by the kernel.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_leave6(xsock_t sock,
const struct in6_addr *mcast_addr,
unsigned int my_ifindex);
/**
* Connect to a remote IPv4 address.
*
* Note that we can use this function not only for TCP, but for UDP sockets
* as well.
*
* @param sock the socket to use to connect.
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @param is_blocking if true, the socket is blocking, otherwise non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is XORP_ERROR. For all other errors or if the non-blocking
* socket was connected, the referenced value is set to 0. If the return value
* is XORP_OK or if the socket is blocking, then the return value is undefined.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_connect4(xsock_t sock,
const struct in_addr *remote_addr,
unsigned short remote_port,
int is_blocking,
int *in_progress);
/**
* Connect to a remote IPv6 address.
*
* Note that we can use this function not only for TCP, but for UDP sockets
* as well.
*
* @param sock the socket to use to connect.
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @param is_blocking if true, the socket is blocking, otherwise non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is XORP_ERROR. For all other errors or if the non-blocking
* socket was connected, the referenced value is set to 0. If the return value
* is XORP_OK or if the socket is blocking, then the return value is undefined.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_connect6(xsock_t sock,
const struct in6_addr *remote_addr,
unsigned short remote_port,
int is_blocking,
int *in_progress);
/**
* Connect to a remote address (IPv4 or IPv6).
*
* Note that we can use this function not only for TCP, but for UDP sockets
* as well.
*
* @param sock the socket to use to connect.
* @param sin agnostic sockaddr containing the local address (If it is
* NULL, will bind to `any' local address.) and the local port to
* bind to all in network order.
* @param is_blocking if true, the socket is blocking, otherwise non-blocking.
* @param in_progress if the socket is non-blocking and the connect cannot be
* completed immediately, then the referenced value is set to 1, and the
* return value is XORP_ERROR. For all other errors or if the non-blocking
* socket was connected, the referenced value is set to 0. If the return value
* is XORP_OK or if the socket is blocking, then the return value is undefined.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_connect(xsock_t sock, const struct sockaddr *sin,
int is_blocking, int *in_progress);
/**
* Accept a connection on a listening socket.
*
* @param sock the listening socket to accept on.
* @return the accepted socket on success, otherwise XORP_BAD_SOCKET.
*/
extern xsock_t comm_sock_accept(xsock_t sock);
/**
* Close a socket.
*
* @param sock the socket to close.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_close(xsock_t sock);
/**
* Set/reset the TCP_NODELAY option on a TCP socket.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_nodelay(xsock_t sock, int val);
/**
* Set/reset the SO_REUSEADDR option on a socket.
*
* XXX: if the OS doesn't support this option, XORP_ERROR is returned.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_reuseaddr(xsock_t sock, int val);
/**
* Set/reset the SO_REUSEPORT option on a socket.
*
* XXX: if the OS doesn't support this option, XORP_ERROR is returned.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_reuseport(xsock_t sock, int val);
/**
* Set/reset the multicast loopback option on a socket.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_loopback(xsock_t sock, int val);
/**
* Set/reset the TCP_MD5SIG option on a socket.
*
* XXX: if the OS doesn't support this option, XORP_ERROR is returned.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_tcpmd5(xsock_t sock, int val);
/**
* Set the TTL of the outgoing multicast packets on a socket.
*
* @param sock the socket whose TTL we want to set.
* @param val the TTL of the outgoing multicast packets.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_ttl(xsock_t sock, int val);
/**
* Set default interface for IPv4 outgoing multicast on a socket.
*
* @param sock the socket whose default multicast interface to set.
* @param in_addr the IPv4 address of the default interface to set.
* If @ref in_addr is NULL, the system will choose the interface each time
* a datagram is sent.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_iface4(xsock_t sock, const struct in_addr *in_addr);
/**
* Set default interface for IPv6 outgoing multicast on a socket.
*
* @param sock the socket whose default multicast interface to set.
* @param ifindex the IPv6 interface index of the default interface to set.
* If @ref ifindex is 0, the system will choose the interface each time
* a datagram is sent.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_iface6(xsock_t sock, u_int ifindex);
/**
* Set the sending buffer size of a socket.
*
* @param sock the socket whose sending buffer size to set.
* @param desired_bufsize the preferred buffer size.
* @param min_bufsize the smallest acceptable buffer size.
* @return the successfully set buffer size on success,
* otherwise XORP_ERROR.
*/
extern int comm_sock_set_sndbuf(xsock_t sock, int desired_bufsize,
int min_bufsize);
/**
* Set the receiving buffer size of a socket.
*
* @param sock the socket whose receiving buffer size to set.
* @param desired_bufsize the preferred buffer size.
* @param min_bufsize the smallest acceptable buffer size.
* @return the successfully set buffer size on success,
* otherwise XORP_ERROR.
*/
extern int comm_sock_set_rcvbuf(xsock_t sock, int desired_bufsize,
int min_bufsize);
/**
* Get the address family of a socket.
* Idea taken from W. Stevens' UNPv1, 2e (pp 109).
*
* @param sock the socket whose address family we need to get.
* @return the address family on success, otherwise XORP_ERROR.
*/
extern int comm_sock_get_family(xsock_t sock);
/**
* Set the blocking or non-blocking mode of an existing socket.
* @param sock the socket whose blocking mode is to be set.
* @param is_blocking if non-zero, then set socket to blocking mode.
*
* @return XORP_OK if the operation was successful, otherwise XORP_ERROR.
**/
extern int comm_sock_set_blocking(xsock_t sock, int is_blocking);
/**
* Determine if an existing socket is in the connected state.
* @param sock the socket whose connected state is to be queried.
*
* @return XORP_OK if the socket is in the connected state, otherwise
* if it is not, or any other error is encountered, XORP_ERROR.
**/
extern int comm_sock_is_connected(xsock_t sock);
__END_DECLS
#endif /* __LIBCOMM_COMM_API_H__ */
Generated by: pavlin on possum.icir.org on Wed Mar 21 11:22:43 2007, using kdoc $.
