ZIPINFO(1) USER COMMANDS ZIPINFO(1) NAME zipinfo - list detailed information about a ZIP archive file SYNOPSIS zipinfo [-1smlvht] file[.zip] [filespec ...] ARGUMENTS file[.zip] Path of the ZIP archive. The suffix ``.zip'' is applied if the file specified does not exist. Note that self-extracting ZIP files are sup- ported; just specify the ``.exe'' suffix your- self. [filespec] An optional list of archive members to be pro- cessed. Expressions may be used to match multi- ple members; be sure to quote expressions that contain characters interpreted by the Unix shell. See PATTERN MATCHING (below) for more details. OPTIONS -1 list filenames only, one per line (useful for pipes) -s list zipfile info in short Unix ``ls -l'' format: default -m list zipfile info in medium Unix ``ls -l'' format -l list zipfile info in long Unix ``ls -l'' format -v list zipfile information in verbose, multi-page format -h list header line -t list totals for files listed or for all files PATTERN MATCHING All archive members are listed unless a filespec is provided to specify a subset of the archive members. The filespec is similar to an egrep expression, and may contain: * matches a sequence of 0 or more characters ? matches exactly 1 character \nnn matches the character having octal code nnn [...] matches any single character found inside the brack- ets; ranges are specified by a beginning character, a hyphen, and an ending character. If an exclamation point or a carat (`!' or `^') follows the left bracket, then the range of characters matched is com- plemented with respect to the ASCII character set (that is, anything except the characters inside the brackets is considered a match). DESCRIPTION ZipInfo lists technical information about a ZIP archive, including information file access permissions, encryption status, type of compression, version and operating system of compressing program, and the like. The default option is to Info-ZIP Last change: 19 Aug 92 (v1.0) 1 ZIPINFO(1) USER COMMANDS ZIPINFO(1) list files in the following format: -rw-rwl--- 1.5 unx 2802 t- defX 11-Aug-91 13:48 perms.2660 The last three fields are clearly the modification date and time of the file, and its name. The case of the filename is respected; thus files which come from MS-DOS PKZIP are always capitalized. If the file was zipped with a stored directory name, that is also displayed as part of the filename. The second and third fields indicate that the file was zipped under Unix with version 1.5 of Zip (a beta version). Since it comes from Unix, the file permissions at the begin- ning of the line are printed in Unix format. The uncompressed file-size (2802 in this example) is the fourth field. The fifth field consists of two characters, either of which may take on several values. The first character may be either `t' or `b', indicating that Zip believes the file to be text or binary, respectively; but if the file is encrypted, ZipInfo notes this fact by capitalizing the char- acter (`T' or `B'). The second character may also take on four values, depending on whether there is an extended local header and/or an ``extra field'' associated with the file (explained in PKWare's APPNOTE.TXT). If neither exists, the character will be a hyphen (`-'); if there is an extended local header but no extra field, `l'; if the reverse, `x'; and if both exist, `X'. Thus the file in this example is (apparently) a text file, is not encrypted, and has neither an extra field nor an extended local header associated with it. The example below, on the other hand, is an encrypted binary file with an extra field: RWD,R,R 0.9 vms 168 Bx shrk 9-Aug-91 19:15 perms.0644 Extra fields are used by PKWare for authenticity verifica- tion(?) and possibly other purposes, and by Info-ZIP's Zip 1.6 and later to store OS/2, Macintosh and VMS file attri- butes. This example presumably falls into the latter class, then. Note that the file attributes are listed in VMS for- mat. Other possibilities for the host operating system include OS/2 with High Performance File System (HPFS), DOS or OS/2 with File Allocation Table (FAT) file system, and Macintosh, denoted as follows: arc,,rw, 1.0 os2 5358 Tl i4:3 4-Dec-91 11:33 longfilename.hpfs arc,hid,rdo,sys dos 4096 b- i4:2 14-Jul-91 12:58 EA DATA. SF --w------- 1.0 mac 17357 bx i8:2 4-May-92 04:02 unzip.macr Info-ZIP Last change: 19 Aug 92 (v1.0) 2 ZIPINFO(1) USER COMMANDS ZIPINFO(1) File attributes in the first two cases are indicated in a DOS-like format, where the file may or may not have its archive bit set; may be hidden or not; may be read-write or read-only; and may be a system file or not. If the attri- butes are too long, the version number of the encoding software is omitted. (The information is still available in the verbose listing, however.) Interpretation of Macintosh file attributes needs some work yet. Finally, the sixth field indicates the compression method and possible sub-method used. There are six methods known at present: storing (no compression), reducing, shrinking, imploding, tokenizing, and deflating. In addition, there are four levels of reducing (1 through 4); four types of imploding (4K or 8K sliding dictionary, and 2 or 3 Shannon- Fano trees); and three levels of deflating (fast, normal, maximum compression). ZipInfo represents these methods and their sub-methods as follows: ``stor''; ``re:1,'' ``re:2,'' etc.; ``shrk''; ``i4:2,'' ``i8:3,'' etc.; ``tokn''; and ``defF,'' ``defN,'' and ``defX.'' The medium and long listings are almost identical to the short format except that they add information on the file's compression. The medium format indicates the file's compression factor as a percentage: -rw-rwl--- 1.5 unx 2802 t- 81% defX 11-Aug-91 13:48 perms.2660 In this example, the file has been compressed by more than a factor of five; the compressed data are only 19% of the ori- ginal size. The long format gives the compressed file's size in bytes, instead: -rw-rwl--- 1.5 unx 2802 t- 538 defX 11-Aug-91 13:48 perms.2660 In addition to individual file information, a default zip- file listing also includes header and trailer lines: Archive: OS2.zip 5453 bytes 5 files ,,rw, 1.0 os2 730 b- i4:3 26-Jun-92 23:40 Contents ,,rw, 1.0 os2 3710 b- i4:3 26-Jun-92 23:33 makefile.os2 ,,rw, 1.0 os2 8753 b- i8:3 26-Jun-92 15:29 os2unzip.c ,,rw, 1.0 os2 98 b- stor 21-Aug-91 15:34 unzip.def ,,rw, 1.0 os2 95 b- stor 21-Aug-91 17:51 zipinfo.def 5 files, 13386 bytes uncompressed, 4951 bytes compressed: 63% The header line gives the name of the archive, its total size, and the total number of files; the trailer gives the number of files listed, their total uncompressed size, and their total compressed size (not including any of Zip's internal overhead). If, however, one or more filespecs are provided, the header and trailer lines are not listed. This Info-ZIP Last change: 19 Aug 92 (v1.0) 3 ZIPINFO(1) USER COMMANDS ZIPINFO(1) behavior is also similar to that of Unix's ``ls -l''; it may be overridden by specifying the -h and -t options expli- citly. In such a case the listing format must also be specified explicitly, since -h or -t (or both) in the absence of other options implies that ONLY the header or trailer line (or both) is listed. See the EXAMPLES section below for a semi-intelligible translation of this nonsense. The verbose listing is self-explanatory. It also lists file comments and the zipfile comment, if any, and the number of bytes of OS/2 extended attributes stored. Note that the latter number will in general NOT match the number given by OS/2's ``dir'' command; OS/2 always reports the number of bytes required in 16-bit format, whereas ZipInfo always reports the 32-bit storage. ENVIRONMENT OPTIONS Modifying ZipInfo's default behavior via options placed in an environment variable can be a bit complicated to explain, due to ZipInfo's attempts to handle various defaults in an intuitive, yet Unix-like, manner. Nevertheless, there is some underlying logic. In brief, there are three ``priority levels'' of options: the default options; environment options, which can override or add to the defaults; and explicit options given by the user, which can override or add to either of the above. The default listing format, as noted above, corresponds roughly to the "zipinfo -hst" command (except when indivi- dual zipfile members are specified). A user who prefers the long-listing format (-l) can make use of the ZIPINFO environment variable to change this default: setenv ZIPINFO -l Unix C shell ZIPINFO=-l; export ZIPINFO Unix Bourne shell set ZIPINFO=-l OS/2 or MS-DOS define ZIPINFO_OPTS "-l" VMS (quotes for LOWERCASE) If, in addition, the user dislikes the trailer line, ZipInfo's concept of ``negative options'' may be used to override the default inclusion of the line. This is accom- plished by preceding the undesired option with one or more minuses: e.g., ``-l-t'' or ``--tl'', in this example. The first hyphen is the regular switch character, but the one before the `t' is a minus sign. The dual use of hyphens may seem a little awkward, but it's reasonably intuitive nonetheless: simply ignore the first hyphen and go from there. It is also consistent with the behavior of the Unix command nice(1). Info-ZIP Last change: 19 Aug 92 (v1.0) 4 ZIPINFO(1) USER COMMANDS ZIPINFO(1) EXAMPLES To get a basic, short-format listing of the complete con- tents of a ZIP archive ``storage.zip,'' with both header and totals lines, use only the archive name as an argument to zipinfo: zipinfo storage To produce a basic, long-format listing (not verbose), including header and totals lines, use -l: zipinfo -l storage To list the complete contents of the archive without header and totals lines, either negate the -h and -t options or else specify the contents explicitly: zipinfo --h-t storage zipinfo storage \* (where the backslash is required only if the shell would otherwise expand the `*' wildcard, as in Unix when globbing is turned on--double quotes around the asterisk would have worked as well). To turn off the totals line by default, use the environment variable (C shell is assumed here): setenv ZIPINFO --t zipinfo storage To get the full, short-format listing of the first example again, given that the environment variable is set as in the previous example, it is necessary to specify the -s option explicitly, since the -t option by itself implies that ONLY the footer line is to be printed: setenv ZIPINFO --t zipinfo -t storage [only totals line] zipinfo -st storage [full listing] The -s option, like -m and -l, includes headers and footers by default, unless otherwise specified. Since the environ- ment variable specified no footers and that has a higher precedence than the default behavior of -s, an explicit -t option was necessary to produce the full listing. Nothing was indicated about the header, however, so the -s option was sufficient. Note that both the -h and -t options, when used by themselves or with each other, override any default listing of member files; only the header and/or footer are Info-ZIP Last change: 19 Aug 92 (v1.0) 5 ZIPINFO(1) USER COMMANDS ZIPINFO(1) printed. This behavior will be more useful when ZipInfo accepts wildcards for the zipfile name; one may then summar- ize the contents of all zipfiles with a single command. To list information on a single file within the archive, in medium format, specify the filename explicitly: zipinfo -m storage unshrink.c The specification of any member file, as in this example, will override the default header and totals lines; only the single line of information about the requested file will be printed. This is intuitively what one would expect when requesting information about a single file. For multiple files, it is often useful to know the total compressed and uncompressed size; in such cases -t may be specified expli- citly: zipinfo -mt storage "*.[ch] Mak\* Finally, to get maximal information about the ZIP archive, use the verbose option. It is usually wise to pipe the out- put into a filter such as more(1): zipinfo -v storage | more TIPS The author finds it convenient to set up an alias ``ii'' for ZipInfo on systems which allow aliases, or else to set up a batch file ``ii.bat'' or to rename the executable to ``ii.exe'' on systems such as MS-DOS which have no provision for aliases. The ``ii'' usage parallels the common ``ll'' alias for long listings in Unix, and the similarity between the outputs of the two commands was intentional. SEE ALSO funzip(1), unzip(1), zip(1), zipcloak(1), zipnote(1), zipsplit(1) AUTHOR Greg Roelofs (also known as Cave Newt). ZipInfo is partly based on S. H. Smith's unzip and contains pattern-matching code by J. Kercheval, but mostly it was written from scratch. The OS/2 extra-field code is by Kai Uwe Rommel. Info-ZIP Last change: 19 Aug 92 (v1.0) 6