New features with AN-2021-09-18: This is the first localization step for the schily source consolidation. Many programs now (hopefully) call gettext() for all strings that need localization. - The next step will include dgettext() calls for the libraries and the missing programs - The following step will include the extracted strings - The last step will include German translations and install support for the resulting binary message object files. ----------> Please test and report compilation problems! <--------- ***** NOTE: As mentioned since 2004, frontends to the tools should ***** ***** call all programs in the "C" locale ***** ***** by e.g. calling: LC_ALL=C cdrecord .... ***** ***** unless these frontends support localized strings ***** ***** used by the cdrtools with NLS support. ***** *** WARNING *** *** Need new smake *** *** Due to the fact that schily-tools 2014-04-03 introduced to use new macro *** expansions and a related bug fix in smake, you need a newer smake *** to compile this source. If your smake is too old and aborts, ensure to *** use the recent smake by calling: cd ./psmake ./MAKE-all cd .. psmake/smake .... become "root" and then call: psmake/smake install The new smake version mentioned above is smake-1.2.4 The recent smake version is smake-1.5 *** Due to the fact that schily-tools 2018-01-26 introduced *** optimizations for the Schily version of SunPro Make, you *** need at least the dmake version from 2018/01/11 with support *** for the "export" directive to compile with this makefile system. For the beginning of the list of new features of the software in this tarball, please scroll down to "NEW FEATURES" WARNING: the new version of the isoinfo program makes use of the *at() series of functions that have been introduced by Sun in August 2001 and added to POSIX.1-2008. For older platforms, libschily now includes emulations for these functions but these emulations have not yet been tested thoroughly. Please report problems! BUG WARNING: Please never report bugs only to Linux distributions as they usually do not forward these bug reports upstream and the Linux distributions typically do not let skilled people check the bugs. We did not hear about a FIFO problem in star for a long time. Then a problem on Linux occurred once every 6000-10000 tries but it did not happen on Solaris after even 10 million tries, so it was not known besides Linux and not reported to the project. BUG WARNING: *** GNU make *** starts too early with parallel execution (when reading Makefiles and evaluating rules for "include" statements already). Since GNU make does not support a concept for a correct ordering of such actions, you need to be prepared to see GNU make fail in parallel mode. If you try to compile a maiden unpacked schilytools tarball in parallel mode using GNU make, this will definitely fail as a result of the GNU make timestamp caching bug. See below for more information. If you are interested in reliable parallel execution, it is recommended to use the included "dmake" program with a command line like: dmake -j10 -r -f SMakefile from the top level directory. Note that if you are on Linux, you need the dmake version from schilytools 2021-06-07 or newer, since that version introduced a solution for a kernel caused performance problem with filesystems on Linux. Older dmake versions will not be faster in parallel mode on Linux. The "dmake" program included in the schilytools tarball is the current version of the "new" SunOS make program that has been introduced in January 1986 by Sun Microsystems. It also introduced new features (like the "include" directive) that 3 years later have been copied by gmake in a partially buggy way. As gmake does not fix showstopper bugs, it cannot be supported. Current showstoppers are: 1) gmake executes "include" related rules in the inverse order, causing rules to fail if they depend on files created by an "earlier" action 2) gmake caches an outdated state of the directory and aborts with a wrong complain about allegedly missing files that in fact exist already, because they just have been remade. NEW FEATURES: - smake: Fixed a typo in a comment in readfile.c - smake: The man page now mentions that the commands called for .INCLUDE_FAILED: should include $^ as argument to the rule command to be able to know what filename is missing and to be pocessed. - smake: Fix a bug in the man page for .INCLUDE_FAILED:. It now correctly mentions that .INCLUDE_FAILED: only applies to the "include" directive but not to the "-include" directive as well (as claimed before). - SunPro Make: The dynamic macro $^ is now documented in the man page. It was always supported by SunPro Make, but for unknown reasons undocumented in the official man page from Sun Microsystems. - SunPro Make: The .INCLUDE_FAILED: special target is now supported the same was as in smake. History: smake introduced .INCLUDE_FAILED: 23 years ago (in July 1998) in order to be able to support completely unknown platforms with the schily makefile system. This works fine, since a bootstrap smake is compiled first in schilytools and this is done via a shell script. That specific use case in smake (with a completely unknown platform, based on an unknown operating system or an unknown CPU) will not work with SunPro Make the same way, since SunPro Make needs smake as a bootstrap make program for compilation. In other words, SunPro Make is compiled on unknown platforms, using a bootstrap smake that was compiled with a shell script and before SunPro Make is compiled on a completely unknown platform, smake did already run the automake scripts triggered from the .INCLUDE_FAILED: target while smake was running. Adding support for .INCLUDE_FAILED: to SunPro Make however still makes sense, as support for .INCLUDE_FAILED: in SunPro Make allows to automatically add initial basic support for new compilers to a development tree using the schily makefile system or similar build systems, while being on a platform with pre-existig SunPro Make binaries. This may even be more probable than the case with a completly unknown OS. - SunPro Make: .INCLUDE_FAILED: special target 2nd group of changes: .INCLUDE_FAILED: is no longer supported when make is in SVr4 mode or when it is in compatibility mode to old SunPro Make versions. .INCLUDE_FAILED: no longer permits dependencies to appear after the colon. These dependencies have been previously ignored. .INCLUDE_FAILED: is now better printed with make -p, since .INCLUDE_FAILED: now appears in the first block of output that lists .PHONY:, .PRECIOUS:, .SUFFIXES: as well. - SunPro Make: A new section "Automake Features" has been added. - SunPro Make: A new version date has been defined. SCCS THOUGHTS: - SCCS: The current idea for converting a historic SCCS project into a project oriented SCCS history bundle is the following: - Create a user map file for "sccslog" by calling: mkdir $HOME/.sccs $EDITOR $HOME/.sccs/usermap Enter the UNIX login names followed by a TAB, followed by an E-mail notation. Use one line per user, e.g. joerg J. Schilling - Create a copy of the whole project to work on for this test. Do not do this conversion on the original project until sccs-6.0 is ready. - chdir to the project home directory of the just created copy. - Call "sccs init -i ." to make the project using an in-tree project oriented repository. - Call: find * -path '*SCCS/s.*' | /opt/schily/ccs/bin/sccscvt -NSCCS/s. -k -ooo -V6 - for the CSRG BSD project use: find * -path '*SCCS/s.*' | TZ=US/Pacific /opt/schily/ccs/bin/sccscvt -NSCCS/s. -k -ooo -V6 - to convert all history files into SCCSv6 history files. The TZ=US/Pacific is important for the UCB conversion since SCCSv6 uses timezones but SCCSv4 does not and we need to have the correct timezone entries in the SCCSv6 history files. For the complete "schilytools" project with 4200 SCCS history files in 55 Mbytes, this takes 12 seconds for the SCCS history from 1984 .. 2020, but note that most of the edits from the 1980s are lost, so there are few entries from the time before 1989. An alternate example: the SCCS history from the BSD-4.4 project from December 1979 up to June 1995 is in 12600 SCCS history files that take up 125 MB. The conversion time to the SCCSv6 history file format is 18 seconds. - Call: find * -path '*SCCS/s.*' | /opt/schily/ccs/bin/sccslog -changeset - to populate the changeset file from the existing deltas. For the complete "schilytools" project with 19600 commits, this takes 8 minutes. The resulting file .sccs/SCCS/s.changeset has a size of approx. 7 MBytes. An alternate example: the SCCS history from the BSD-4.4 project from December 1979 up to June 1995 has approx. 47000 commits. The conversion time is approx. 40 minutes. The size of the resulting changeset file is approx. 14 MBytes. - convert the in-tree repository into an off-tree repository. This final step is not yet needed and there is currently no code to do that automatically. - If you like to check the resulting changeset file, there is currently only one way to look at it, by calling: sccs -O get -p -A -m .sccs/SCCS/s.changeset | more This prints an annotated version of the changeset file. The next task is to develop an enhancement to "sccs log" that prints the changeset in a way similar to what "hg log -v" prints. - NOTE: Normal filesystems on Linux are slow, it is advised to make the conversions on tmpfs for performance reasons in case you are using Linux. Please however keep in mind that this is still experimental and there is absolutely no grant that a changelog created with current experimental software will work correctly with the final SCCS version. The procedure is just an example to check how it may look like. The final conversion method will be more automated... most likely by a command similar to "sccs import ..." IMPORTANT: This is not yet the time to finally convert a project into the project mode, because the project would be stuck in the current state. What we need to continue work in that repository state in the project mode is at least a working "sccs commit". Be prepared to remove the changeset history file once "sccs commit" works and to re-create the changeset file for that time. - SCCS TODO: - Activate "fsdiff" as a "bdiff" replacement in delta(1) to speed up delta(1) and to reduce the size of the SCCS history files. - Implement something that outputs similar information from the changeset file as printed with "hg log -v". This would be the next key feature. - verify whether sccs.c uses -NSCCS in the back end programs correctly, instead of converting g-file names from the command line into s.file names in the frontend in order to forward s.file names to the backend programs. This is needed for an off-tree repository. The related unit tests are already passed. - Add code to to sccs(1) to send a list of files to admin(1) and delta(1) with new or modified files in order to have all important code for a "sccs commit" in a single program that does not need to deal with ARG_MAX limitations. - Add code to admin(1), delta(1), sccs-log(1) and get(1) to maintain/understand the changeset file. This is mainly writing out the sccschangeset(4) entries to an intermediate store if a single file has been treated successfully. For sccs-log(1), see below. - Finish the work to allow normal line based diffs in SCCS even for binary files. This are files that include nul bytes and this needs to completely avoid fputs() and this needs an initialized member p_line_length in struct packet even for all content that does not result from a previous getline() call. - sccs -R tell (and probably other subcommands?) does not yet work in NewMode - Add code to libcomobj to understand the changeset file. This is needed in order to e.g. know the file names and file specific SIDs/state that corresponds to a project global SID. - Find/verify a complete transactional model that allows to repair complex changes to the set of files for a project that have been aborted in the middle. The current idea is to create the file $PROJECTHOME/.sccs/changeset with the deltas to the changeset during a complex update operation. - Find a decision on how to deal with the admin flags that are currently implemented as global flags and thus do not depend on the SID (version) if the history file. - Aborting a transaction via ^C currently requires a manual removal of the global lock file. Find a way to avoid this in case that a commit has been aborted while being prompted for a commit message (which is before any real action happened). - Implement a fully automated method to convert a SCCSv4 based history with unrelated history files into a new SCCSv6 based project mode history with a populated changeset history file. This will most likely be done as a variant of the to be defined new command "sccs sccsimport" that imports a whole existing old SCCS project. - Implement this "sccs sccsimport" based conversion in a way where sccs(1) holds the global changeset lock for the whole time of the conversion. - Bourne Shell Missing features for POSIX compliance: - Support for $'...' quoting (this is not needed for the current version of POSIX but for the next POSIX version that will be named SUSv8). The development of SUSv8 will start in late 2016. We are now expecting the Bourne Shell to be fully POSIX compliant. - Bourne Shell further TODO list: - Finish loadable builtin support. - POSIX does not allow us to implement ". -h", so we will add a "source" builtin to be able to implement "source -h" - The following builtins (that are available in bsh) are still missing in the Bourne Shell: err echo with output going to stderr glob echo with '\0' instead of ' ' between args env a builtin version of /usr/bin/env The following bsh intrinsics are still missing in the Bourne Shell: - the restricted bsh has restriction features that are missing in the Bourne shell. - source -h read file into history but do not execute and probably more features not yet identified to be bsh unique. Author: Joerg Schilling D-13353 Berlin Germany Email: joerg@schily.net Please mail bugs and suggestions to me.