[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[pci] run simulation problems

To: pci@opencores.org
Subject: [pci] run simulation problems
From: Ines Khelifi <ikhelifi@vt.edu>
Date: Wed, 24 Jul 2002 11:58:15 -0400
Reply-To: pci@opencores.org
Sender: owner-pci@opencores.org
Hi all

 I just suscribed to this listserv, so I am not sure about all the previous 
messages that we sent out about my problem.
I downloaded the PCI core testbench, and tried to run a simulation with : 
run_pci_sim.scr, but this is what I get:
ncvlog: v3.20.(p1): (c) Copyright 1995 - 2000 Cadence Design Systems, Inc.
file: ../../../rtl/verilog/pci_parity_check.v
        module worklib.PCI_PARITY_CHECK:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_target_unit.v
        module worklib.PCI_TARGET_UNIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/wb_addr_mux.v
        module worklib.WB_ADDR_MUX:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/cbe_en_crit.v
        module worklib.CBE_EN_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/fifo_control.v
        module worklib.FIFO_CONTROL:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/out_reg.v
        module worklib.OUT_REG:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_tpram.v
        module worklib.PCI_TPRAM:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/wb_master.v
        module worklib.WB_MASTER:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/conf_cyc_addr_dec.v
        module worklib.CONF_CYC_ADDR_DEC:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/frame_crit.v
        module worklib.FRAME_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_target32_clk_en.v
        module worklib.PCI_TARGET32_CLK_EN:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pciw_fifo_control.v
        module worklib.PCIW_FIFO_CONTROL:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/wb_slave.v
        module worklib.WB_SLAVE:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/conf_space.v
        module worklib.CONF_SPACE:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/frame_en_crit.v
        module worklib.FRAME_EN_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/par_crit.v
        module worklib.PAR_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pciw_pcir_fifos.v
        module worklib.PCIW_PCIR_FIFOS:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/wb_slave_unit.v
        module worklib.WB_SLAVE_UNIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/frame_load_crit.v
        module worklib.FRAME_LOAD_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_bridge32.v
        module worklib.PCI_BRIDGE32:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_target32_devs_crit.v
        module worklib.PCI_TARGET32_DEVS_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/perr_crit.v
        module worklib.PERR_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/wbr_fifo_control.v
        module worklib.WBR_FIFO_CONTROL:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/cur_out_reg.v
        module worklib.CUR_OUT_REG:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_decoder.v
        module worklib.PCI_DECODER:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_target32_interface.v
        module worklib.PCI_TARGET32_INTERFACE:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/perr_en_crit.v
        module worklib.PERR_EN_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/wbw_fifo_control.v
        module worklib.WBW_FIFO_CONTROL:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/decoder.v
        module worklib.DECODER:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_in_reg.v
        module worklib.PCI_IN_REG:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/serr_crit.v
        module worklib.SERR_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/wbw_wbr_fifos.v
        module worklib.WBW_WBR_FIFOS:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/delayed_sync.v
        module worklib.DELAYED_SYNC:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/irdy_out_crit.v
        module worklib.IRDY_OUT_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_io_mux.v
        module worklib.PCI_IO_MUX:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_io_mux_ad_en_crit.v
        module worklib.PCI_IO_MUX_AD_EN_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_io_mux_ad_load_crit.v
        module worklib.PCI_IO_MUX_AD_LOAD_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_target32_sm.v
        module worklib.PCI_TARGET32_SM:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/serr_en_crit.v
        module worklib.SERR_EN_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/delayed_write_reg.v
        module worklib.DELAYED_WRITE_REG:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/mas_ad_en_crit.v
        module worklib.MAS_AD_EN_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/mas_ad_load_crit.v
        module worklib.MAS_AD_LOAD_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_master32_sm.v
        module worklib.PCI_MASTER32_SM:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_target32_stop_crit.v
        module worklib.PCI_TARGET32_STOP_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/synchronizer_flop.v
        module worklib.synchronizer_flop:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/async_reset_flop.v
        module worklib.async_reset_flop:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/mas_ch_state_crit.v
        module worklib.MAS_CH_STATE_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_master32_sm_if.v
        module worklib.PCI_MASTER32_SM_IF:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_target32_trdy_crit.v
        module worklib.PCI_TARGET32_TRDY_CRIT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/top.v
        module worklib.TOP:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/pci_rst_int.v
        module worklib.PCI_RST_INT:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/sync_module.v
        module worklib.SYNC_MODULE:v
                errors: 0, warnings: 0
file: ../../../rtl/verilog/wb_tpram.v
        module worklib.WB_TPRAM:v
                errors: 0, warnings: 0
ncvlog: v3.20.(p1): (c) Copyright 1995 - 2000 Cadence Design Systems, Inc.
file: ../../../bench/verilog/wb_master32.v
        module worklib.WB_MASTER32:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/wb_master_behavioral.v
        module worklib.WB_MASTER_BEHAVIORAL:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/system.v
        module worklib.SYSTEM:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/pci_blue_arbiter.v
        module worklib.pci_blue_arbiter:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/pci_bus_monitor.v
        module worklib.pci_bus_monitor:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/pci_behaviorial_device.v
        module worklib.pci_behaviorial_device:v
                errors: 0, warnings: 0
        module worklib.delayed_test_pad:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/pci_behaviorial_master.v
        module worklib.pci_behaviorial_master:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/pci_behaviorial_target.v
        module worklib.pci_behaviorial_target:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/wb_slave_behavioral.v
        module worklib.WB_SLAVE_BEHAVIORAL:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/wb_bus_mon.v
        module worklib.WB_BUS_MON:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/pci_behavioral_iack_target.v
        module worklib.PCI_BEHAVIORAL_IACK_TARGET:v
                errors: 0, warnings: 0
file: ../../../bench/verilog/pci_unsupported_commands_master.v
        module worklib.pci_unsupported_commands_master:v
                errors: 0, warnings: 0
run_pci_sim.scr: [[: not found
run_pci_sim.scr: [[: not found
run_pci_sim.scr: [[: not found
ncsim: v3.20.(p1): (c) Copyright 1995 - 2000 Cadence Design Systems, Inc.
ncsim: *F,NOSNAP: snapshot 'worklib.bridge32:fun' does not exist in the 
libraries.

I don't know anything about Verilog and ncsim, so I am not sure what that 
means. Any help would be appreciated.
Thank you
ines

--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml
Follow-Ups:
- Re: [pci] run simulation problems
  - From: "Miha Dolenc" <mihad@opencores.org>
Prev by Date: Re: [pci] how to simulate the project
Next by Date: Re: [pci] run simulation problems
Prev by thread: Re: [pci] problems with simulation
Next by thread: Re: [pci] run simulation problems
Index(es):
- Date
- Thread