[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ethmac] got my CRC running(mine is not)
I can help you a little bit, by reviewing it, but that's about it. I just
don't have that kind of free time. Sorry.
- Clive
At 05:52 PM 5/6/2002 -0700, you wrote:
>HI,
>i have got the equation from www.easic.be for 8 bit
>data path and CRC-32....
>and then for this function i am providing input 8 bit
>data and a updating value of buffer like:
>
>crcbuffer = countcrc [this is function]
>(RxDI[data],crcbuffer);
>
>and then on the positive edge of clk i am comparing it
>with the magic no. and if it is equal then CRCOK in
>1....
>
>i believe this logic is correct. but, i am not able to
>test it. so can anybody help me. i'll really
>appriciate that.
>
>waiting for replies.
>
>Thanks,
>
>Waman.
>
>
>
>
>--- "Christian R. Brecht" <Brecht@cbedv.com> wrote:
> > Hi all!
> >
> > Thank you very much for your help! Finally I have a
> > running version of my
> > CRC (which in fact was never wrong, I just used it
> > the wrong way )-: )...
> >
> > You've bee a big help! Thx!
> >
> > Christian
> >
> >
> >
>-------------------------------------------------------
> > Christian R. Brecht
> > Brecht@cbEDV.com
> >
>-------------------------------------------------------
> >
> > ----- Original Message -----
> > From: "Illan Glasner" <iglasner@zumanetworks.com>
> > To: <ethmac@opencores.org>
> > Sent: Monday, May 06, 2002 7:47 PM
> > Subject: FW: [ethmac] CRC question
> >
> >
> >
> > Hi,
> >
> > From some reason my replay Email didn;t
> > appear till now so I will
> > re-send it in hope this time it will pass the
> > barrier.
> >
> > have a nice day
> >
> > Illan
> >
> > -----Original Message-----
> > From: Illan Glasner
> > Sent: Friday, May 03, 2002 9:59 AM
> > To: 'ethmac@opencores.org'
> > Subject: RE: [ethmac] CRC question
> >
> >
> >
> > Hi,
> >
> > Hope the following files will help you and any
> > other who might be
> > struggling with this crc as well as anyone who use
> > crc RTL code in his
> > behavoral instead of using task.
> >
> > crc4.v :
> > basicly the first run you simple compile it and it
> > calculate crc for few
> > data.
> >
> > than I took this data which have the crc value and
> > push it back and got the
> > magic number.
> >
> > for the second run you need to use th
> > +define+second_run
> >
> > of course the second run 8 extra data are determine
> > from the first run so it
> > is not "general" solution but it should help yu see
> > why you don;t get the
> > right value in your crc
> >
> > crc_calc_task.v
> > to make your simulation more effective I also added
> > a task that you should
> > use in any behavioral test bench which will
> > calcualte the crc in zero time.
> >
> > if you are intrested in how the crc equation are
> > constract this task is the
> > starting point as it have the basic single bit
> > formula and than you can
> > expand it for using it for any width as well as
> > using De-Morgan rules you
> > can get the equation for any width. (or simple go to
> > asics site and get it
> > done more quickly).
> >
> > have a nice day
> >
> > Illan
> >
> >
> >
> > -----Original Message-----
> > From: Christian R. Brecht [mailto:Brecht@cbedv.com]
> > Sent: Friday, May 03, 2002 3:42 AM
> > To: ethmac@opencores.org
> > Subject: [ethmac] CRC question
> >
> >
> >
> > Dear All!
> >
> > I know this is not an ethmac question but for you
> > this will be an easy one:
> > I am working on my diploma work right now and for
> > some reasons I cannot use
> > your ethernetcore as we need some special things
> > implemented. But one thing
> > is similar: the CRC in general.
> > I guess I understood the CRC itself but for me it
> > seems the CRC-32 for
> > ethernet needs some weird extras like inverting the
> > 32 bits and reflecting
> > them as well. I will have to initialize the register
> > with "F"s as the first
> > step.
> >
> > Q: After all, usually I have to put zeros into the
> > CRCC. Do I have to put 0s
> > into this CRC-32C as well, or do I need to put Fs to
> > get it run (I need
> > nibbles for input). The problem is I have two
> > "testpatterns", one does the
> > job (60 Bytes of zeros work with mine) the other
> > doesn't. I used the CRC-32
> > from easics.com (CRC-Tool). I tried almost every
> > combination. Am I doing a
> > major mistake?
> > Does someone of you have an 4:32-implementation of
> > an CRCC (well, I am
> > programming in VHDL actually, but this should not be
> > a problem)? Or another
> > testpacket? I would be really happy about that.
> >
> > Thank you very much for your time reading this.
> >
> >
> >
> > Sincerely yours,
> > Christian
> > university of applied technology cologne
> >
> >
> > --
> > To unsubscribe from ethmac mailing list please visit
> > http://www.opencores.org/mailinglists.shtml
> >
> >
> > --
> > To unsubscribe from ethmac mailing list please visit
>http://www.opencores.org/mailinglists.shtml
>
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Health - your guide to health and wellness
>http://health.yahoo.com
>--
>To unsubscribe from ethmac mailing list please visit
>http://www.opencores.org/mailinglists.shtml
Clive Bolton, Engineer
Bolton Engineering, Inc.
72 Stone Place
Melrose, MA 02176
(781) 662-1670 voice
(781) 662-1680 fax
http://www.altera.com/products/design_services/acap/consultants/acp-bolton.html
<cbolton@world.std.com>
--
To unsubscribe from ethmac mailing list please visit http://www.opencores.org/mailinglists.shtml