RE: [ethmac] FPGA size

["Dierks, Joel" <Joel_Dierks@spectrian.com>]

Hello Tal,

I am very interested in your progress of putting the MAC into a Spartan II.
I have
a customer who requires an Ethernet interface and I already have the Spartan
on my control board.  Which PHY do you plan to use?  I plan to implement a
10baseT interface but I haven't found a PHY that accepts nibbles.  Has
anyone
out there altered the design to transmit and receive a 10 MHz serial data
stream?

Joel R. Dierks
Spectrian Corporation
2515 Ellington Rd.
Quincy, IL  62301

Tel: 217-277-8118
joel_dierks@spectrian.com

> -----Original Message-----
> From: Tal Weiss [mailto:tal@congruency.com]
> Sent: Sunday, November 11, 2001 3:04 AM
> To: ethmac@opencores.org
> Subject: RE: [ethmac] FPGA size
> 
> 
> Thanks Igor.
> 
> -----Original Message-----
> From: owner-ethmac@opencores.org [mailto:owner-ethmac@opencores.org]On
> Behalf Of Igor Mohor
> Sent: Thursday, November 08, 2001 9:34 PM
> To: ethmac@opencores.org
> Subject: RE: [ethmac] FPGA size
> 
> 
> Hi, Tal,
> 
> last time I tried to implement it, it took around 800 slices. 
> Afterwards few
> more things were added.
> I would say that 1000 slices should be enough (but near the edge).
> 
> Regards,
> 	Igor
> 
> > -----Original Message-----
> > From: owner-ethmac@opencores.org
> > [mailto:owner-ethmac@opencores.org]On Behalf Of Tal Weiss
> > Sent: 8. november 2001 16:33
> > To: ethmac@opencores.org
> > Subject: [ethmac] FPGA size
> >
> >
> > Hi all,
> >
> > I'm thinking about testing the core on a Spartan II chip.
> > How big is it? Would 1000 slices suffice? Has it been done?
> >
> > Thanks,
> >
> > Tal.
> >
> >
> > --------------------------
> > Tal Weiss
> > Congruency Ltd.
> > 3 Magshimim St.
> > POB 7813
> > Petah-Tikva 49170, Israel
> > Email:  tal@congruency.com
> > Phone:  972-3-9212322-218
> > Fax  :  972-3-9210757
> > --------------------------
> >
> >
> > --
> > To unsubscribe from ethmac mailing list please visit
> http://www.opencores.org/mailinglists.shtml
> 
> --
> To unsubscribe from ethmac mailing list please visit
> http://www.opencores.org/mailinglists.shtml
> 
> --
> To unsubscribe from ethmac mailing list please visit 
> http://www.opencores.org/mailinglists.shtml
> 
--
To unsubscribe from ethmac mailing list please visit http://www.opencores.org/mailinglists.shtml