Package: block-badips Version: 0.6.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 52 Depends: bash, ipset, iptables, curl | wget, util-linux, grep, coreutils, sed, gawk | mawk Filename: all/block-badips_0.6.0-1_all.deb Size: 16098 MD5sum: 6b83f744c118aff1aeb7be29f1de36f2 SHA1: add1abf35805c325f1ba66bfa35beb7a3a6171eb SHA256: 60fdd2c25276cfe8729bbcea57a3debf81f493fa5d78128a2452c5e93880997f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Block IPs of known brute-force attackers Downloads a list of IPv4 and IPv6 addresses and ranges, by default from blocklist.de, loads it into ipsets and drops their traffic with one iptables rule per address family in the PREROUTING chain of the raw table. Invalid, too broad or suddenly much shorter lists are refused. Package: cron-check-nagios Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: monitoring-plugins-nagios, mailx, cron Filename: all/cron-check-nagios_0-0_all.deb Size: 3134 MD5sum: 5f2f531d60daed9cc9c42c6fe96764d9 SHA1: aae4379a62781dc696c090f04d9732898e2bc794 SHA256: 66354b7460204d40352908177760c88a54586585e368d4bdce3df8133a4a2b52 Section: libs Priority: optional Description: Provides a script that can be executed via cron to see if nagios is still up and running. If nagios is down or last log entry longer than a minute ago, a mail is sent to root. Package: monitoring-plugins-apcaccess Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: apcupsd, python3 Filename: all/monitoring-plugins-apcaccess_0-0_all.deb Size: 3598 MD5sum: af659ed4b94cfbef9f9f06d904602355 SHA1: bdc9e1dd4a4dbf262c063f174ef7ef7881d7e8f1 SHA256: b515a996d9fbe72a5f3a1201bcb739f7fb2bf30920985da1dffbb536a7d6da94 Section: libs Priority: optional Description: Uses apcaccess to retrieve data from a running apcupsd. Package: monitoring-plugins-bareos-job Version: 1.2-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 271 Depends: python3 (>= 3.7), python3-psycopg2 Filename: all/monitoring-plugins-bareos-job_1.2-2_all.deb Size: 231892 MD5sum: 9cc41b7684e3e42d197e16811d262f4f SHA1: 45069a50fb474bcb7f8c456df11a438465e4917b SHA256: ddc7d2fdf722e1adf59560ed19e26a3517ee1e70b4318223eba95e15fc610b65 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-job Description: Nagios/Icinga plugin to check a Bareos backup job Checks a specific Bareos backup job via the Bareos PostgreSQL catalog, optionally only its most recent run, and reports files, size, duration and age as performance data. Package: monitoring-plugins-bareos-pool Version: 1.0-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-pool_1.0-2_all.deb Size: 14640 MD5sum: 6371d6ae9676de0be797ca27d8d09642 SHA1: 9ceb4678a6d1c4b71a1d942cb39c0a290eae5706 SHA256: 2f644a8634fb586e65d51fdc6bb75f684342c2b66e59b79195dd71f104b24f26 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-pool Description: Nagios/Icinga plugin to check the tapes in Bareos pools Checks the number of tapes in a Bareos pool via the Bareos PostgreSQL catalog, and the number of volumes overdue for recycling back to the scratch pool. check_bareos_pool_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-bareos-tape Version: 1.1-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-tape_1.1-2_all.deb Size: 14958 MD5sum: 957781b574465bf659a41945e9b37fe6 SHA1: fc4da5776bbd804b13cfac0c9505eefa10c1ec8b SHA256: 5e269736b08904f7b47c2ab16c82c137752e1715e85f894a1a105e94af196e14 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-tape Description: Nagios/Icinga plugin to check the lifecycle of Bareos tapes Checks the lifecycle state of Bareos tape volumes via the Bareos PostgreSQL catalog: recycle count, mount count, write errors, tape age and volume status. check_bareos_tape_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-block-badips Source: block-badips Version: 0.6.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: sudo, bash, grep, ipset, iptables Filename: all/monitoring-plugins-block-badips_0.6.0-1_all.deb Size: 4762 MD5sum: 1bbfb9305e389d5b0e9602404026594e SHA1: 11ee757dd4671f5b9f135a2b94589a5832f2cbb8 SHA256: a21ae427f19e5fc3b717f877892a97bc611d7f60800ca007b17468dfcbe733bd Section: libs Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Nagios/Icinga plugin to check the blocklists of block-badips Checks the number of blocked entries, the age of the last update, ipsets that no rule uses and nearly full ipsets. A sudoers snippet for the user nagios is included. Package: monitoring-plugins-cups-printer Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: cups-client Filename: all/monitoring-plugins-cups-printer_0-0_all.deb Size: 3276 MD5sum: 90e435a3547032fb5248ea85f9c0d4fb SHA1: 281d909b43e02e45a95c8df24281c1ebc728df74 SHA256: 0a4a8888c92e641d54ddf618c45ae0d3716b5e0239172cd9e7d57b88f9a81163 Section: libs Priority: optional Description: Checks if cups provides a certain printer. Package: monitoring-plugins-cups-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: cups-client Filename: all/monitoring-plugins-cups-queue_0-0_all.deb Size: 4472 MD5sum: ad8b572bc272ae6f173f45b930fb2670 SHA1: 67baefd449ee909550f28f28b15487dcaaa2aedd SHA256: d95ae581e54cb56fd93c86e1e4f83569597776bec78a32d18607b95ab644fae1 Section: libs Priority: optional Description: Checks the length of a printer queue in cupsd. Package: monitoring-plugins-dd-wrt-inet-access Source: monitoring-plugins-dd-wrt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 13 Depends: openssh-client Filename: all/monitoring-plugins-dd-wrt-inet-access_0.1-1_all.deb Size: 2326 MD5sum: d9901eecb913e17baea83520c8700299 SHA1: a4c901a3a1e0c9c7afe582b3f482a9b0334306c9 SHA256: 25f1c2f8c01d82af0667bab36d5f01b3e9b0b8629689b842515786d1f77ca386 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check if a router running dd-wrt has internet connection Logs in via ssh on a router running dd-wrt and tries to access a certain website with w3m to check if internet access is given. Package: monitoring-plugins-dd-wrt-ps Source: monitoring-plugins-dd-wrt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 14 Depends: openssh-client Filename: all/monitoring-plugins-dd-wrt-ps_0.1-1_all.deb Size: 2748 MD5sum: 8e2bdf506f19c31c8c34047c70868362 SHA1: a3cf4b96a94fb33d902d95134e4cf5d869552c93 SHA256: 2c50d481f2eea90bc0df47e7353fdedaee69e21ff267255d4408a5e4f0bb619f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check running processes on a dd-wrt router Logs in via ssh on a router running dd-wrt and checks with a list of given processes if all of them are running. Package: monitoring-plugins-dns-pl Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Filename: all/monitoring-plugins-dns-pl_0-0_all.deb Size: 9570 MD5sum: 1ab29bf14bb0ffe81badfdf6ffe29152 SHA1: 866746c00904f04473e00d231de986765ecae64a SHA256: 601254f5645428829698ba10919ee5081602aa9f3e694c3ab7c5661286748422 Section: libs Priority: optional Description: Uses perl to query a DNS server and checks the response. See https://github.com/thorfi/nagios-bind9-plugin. Package: monitoring-plugins-esphome-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 50 Depends: python3 (>= 3.8), python3-requests Recommends: python3-aioesphomeapi Filename: all/monitoring-plugins-esphome-sensor_0.2.1-1_all.deb Size: 14678 MD5sum: 6810af4f859522ea648b40e562706260 SHA1: 6895254464d0d1ba064664d6d4ae54548ad45d2e SHA256: 2504e33aafd63b2f6f479be8171e215ff71253d9d92f1eb573d0de60f6de2eb4 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_esphome_sensor Description: Checks ESPHome devices via the native API or web_server v3 Checks ESPHome devices via either the web_server (version 3) HTTP JSON API (with optional HTTP basic auth) or the native API component (with optional plaintext password or Noise PSK encryption key). Supports checking a numeric sensor/text_sensor value against thresholds (-c may be smaller than -w), the time offset of a sensor against the local clock or an NTP server, and a boolean expression over multiple binary_sensor entities. --mode api additionally requires the python3 module aioesphomeapi to be installed separately. Package: monitoring-plugins-exim-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Depends: exim4 Filename: all/monitoring-plugins-exim-queue_0-0_all.deb Size: 3088 MD5sum: 2c9bf7679dac07195e1a0fbae2948df1 SHA1: 4a916d45f879696d535085de29470f3c04d855b6 SHA256: b8dedb8f5d1371734fe28fa1481ab9dcefb25a4e20f5236dbc5917be1900a61a Section: libs Priority: optional Description: Uses exim -bpc to check the length of the queue of exim. Package: monitoring-plugins-file-age2 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Filename: all/monitoring-plugins-file-age2_0-0_all.deb Size: 3900 MD5sum: 6922c7ed1bd1f07b8ebae9c1dd32a4a1 SHA1: 15c91cb5e0aa80ee3996271ce171da72c0e722e6 SHA256: 34428140f89c6a4d82e726326a1c224c1acd7e2861aa65e0715081cbf5511dfa Section: libs Priority: optional Description: Check file age and size but has a mode to not report error on missing files. Thus file-age2 is suitable for lock files. Package: monitoring-plugins-file-exists Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Filename: all/monitoring-plugins-file-exists_0-0_all.deb Size: 2968 MD5sum: a2a7ffec7e600d6a663bb7222afca7a4 SHA1: 9ef74cb28a8f9895517bf4440aa81eb165b8b029 SHA256: 62903b97635c09730f1c725e2073cdbf4b93dc824e17fbf1a8e569e8a0e10325 Section: libs Priority: optional Description: Uses test command to check if a file exists. Can also be used for device files /dev/*. Package: monitoring-plugins-fileage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3 Filename: all/monitoring-plugins-fileage_0-0_all.deb Size: 4056 MD5sum: 570e2946e0a19dfd2c1271e24c20f6da SHA1: e8c7357d622af82daa1c089dafc973e18f2be376 SHA256: 4316249c71583b6f82d895ab3541c3558eee17867d689fa3e524bb95d4863eb4 Section: libs Priority: optional Description: Checks if a file is younger than a certain age. Useful for checking arbitrary daemons that write to files periodically. Package: monitoring-plugins-flexlm-server Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7) Recommends: openssh-client Breaks: monitoring-plugins-flexlm (<< 1) Replaces: monitoring-plugins-flexlm (<< 1) Filename: all/monitoring-plugins-flexlm-server_0.2-1_all.deb Size: 9572 MD5sum: 8317f9d350f3a6242eba5b8af604d431 SHA1: 305081efe440fac6a69b5bbd6679a14a32e17e33 SHA256: 61e052ad6dec1b330d3c6dbf423a8c4d44765405f34d24347fa957642bdf8a31 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_flexlm_server Description: Nagios/Icinga plugin to check FlexLM license servers Nagios/Icinga plugin that checks a FlexLM (FlexNet Publisher) license server with lmutil, written in Python 3 with the standard library only. . It checks that the license server and all vendor daemons are up, reports the usage of every feature as performance data, and alerts on the days until the earliest expiry of any feature. lmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-folder Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: libmonitoring-plugin-perl Filename: all/monitoring-plugins-folder_0-0_all.deb Size: 4900 MD5sum: 1b673483f0894cfa98cf3f51fd3265b0 SHA1: 79a8c4d9ff9c3ddb9bd4dd00d1855b1088cd1f68 SHA256: 71e56b3c2e89fc818046906bfb9caccb461352733b1455161eca648981299f98 Section: libs Priority: optional Description: Checks files in a given folder for count, total size and age, using thresholds in monitoring-plugins format. Package: monitoring-plugins-ftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-ftp_0-0_all.deb Size: 3646 MD5sum: 805581995c5d7627e69c687f64b420f6 SHA1: a47a0f34e544e35585c064fc22a128bef84ff74b SHA256: aac1a4b17383875d683e5a00f502a590d86b01e076f7a41309291479b7323a00 Section: libs Priority: optional Description: Checks if an ftp server is up and running by logging in. Package: monitoring-plugins-gitlab Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 34 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-gitlab_0.2-1_all.deb Size: 10864 MD5sum: 3dfeca4180b82a29fc6c04fd1ab0ba6f SHA1: 5d8dcea2e8ed6f1e6c2b3c344472dd80a3fd5f5f SHA256: c6e6520068195c063285118962ec589701e8ba3f1fe3b0d2c9d55e02c0eebe6b Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_gitlab Description: Nagios/Icinga plugin to check a GitLab instance Nagios/Icinga plugin for GitLab, written in Python 3 with the standard library only. It queries the GitLab REST API, so the monitoring host needs nothing but network access and an access token. . Modes: * health: does the API answer, which version runs, and how fast * token: how many days the monitoring token itself is still valid * stats: users, projects, groups, issues and merge requests * sidekiq: background job processing and backlog * migrations: failed or unfinished batched background migrations * rotate: renews the access token before it expires, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-hassio Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3, python3-requests Filename: all/monitoring-plugins-hassio_0-0_all.deb Size: 4284 MD5sum: da627c1904c97932e91ba87f7dd807a0 SHA1: d70ff9d8b148454bd67af879e6bcc71a6749a2a3 SHA256: fc910b9bae7fead0ec4f1f99848da3cb17ec69113fd8486a818d681adfb8ed0b Section: libs Priority: optional Description: Queries sensors of a Home Assistant instance via its REST API and compares their states against expected string, timestamp or numeric values. Package: monitoring-plugins-homeassistant-sensor Version: 0.1.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.8) Filename: all/monitoring-plugins-homeassistant-sensor_0.1.0-1_all.deb Size: 12520 MD5sum: 679fe6386982903f23460394e5256194 SHA1: 921d5299f0067683903dc0b53e6be88a6989ecdd SHA256: d72b2ee8049347e076e59026a0d1b7ed8e62204ee51501a3e05b359d08366a85 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_homeassistant_sensor Description: Checks Home Assistant entities via its REST API Checks Home Assistant entities via its REST API, with a long-lived access token. Supports checking a numeric state or attribute against thresholds (-c may be smaller than -w), that one entity stays above or below another by a margin (e.g. a wall temperature above the dew point), how long ago an entity last reported, the time offset of a timestamp entity, a boolean expression over on/off entities, and a regular expression against a state. Unavailable entities are CRITICAL by default. Package: monitoring-plugins-immich Version: 0.3-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-immich_0.3-2_all.deb Size: 9324 MD5sum: 6a89dee4edcbdc529e89b8fc46c8d756 SHA1: 91e67fdada3a85df5a79b2c743dff393d7ff58e0 SHA256: 4ed140569afcba9d81ec6915c4838261ff2a495401dfefc8830a9b6ff6a73928 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_immich Description: Nagios/Icinga plugin to check an Immich instance Nagios/Icinga plugin for Immich, written in Python 3 with the standard library only. It queries the Immich REST API, so the monitoring host needs nothing but network access and an API token. . Modes: * health: does the server answer its ping endpoint, and how fast * storage: how much of the storage is used * stats: how many photos and videos are stored, and how much space they use * rotate: gives the API key a new secret, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-influxdb-data-age Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 30 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-influxdb-data-age_0.1-1_all.deb Size: 9460 MD5sum: 7003d22285cc631dc1718d6f3951743b SHA1: 15476a64bc130c13f48619150b64411c83c3f4d2 SHA256: 3a052a1d38ccaf198fa6b0d4cb1bce6ff325417e347337f5e3b29d8fd169767b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_influxdb_data_age Description: Nagios/Icinga plugin to check the age of the newest data in InfluxDB Nagios/Icinga plugin that checks how old the newest data is that an InfluxDB 2 Flux query returns, to catch measurements that stopped arriving. Written in Python 3 with the standard library only. The plugin was check_influxdb_data_age.py in the monitoring-plugins collection; that name is kept as a link. Package: monitoring-plugins-ipmi-power Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: freeipmi, ipmitool Filename: all/monitoring-plugins-ipmi-power_0-0_all.deb Size: 3514 MD5sum: 5f915356ee1519737debe91379fb4e14 SHA1: f401ecaa3752f1801a219262faaf517630a86e13 SHA256: 1dc3fa979bcbde17f2792cf75773eb9b260394239e18ca414873f012eaa76e36 Section: libs Priority: optional Description: Uses ipmitool from freeipmi to check is a system is powered. Useful as master for service dependencies. Package: monitoring-plugins-ipmi-sensor3 Version: 3.14-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 70 Depends: perl:any, freeipmi-tools (>= 0.5.1), libipc-run-perl Conflicts: monitoring-plugins-ipmi-sensor1, monitoring-plugins-ipmi-sensor2 Filename: all/monitoring-plugins-ipmi-sensor3_3.14-2_all.deb Size: 28548 MD5sum: 95e1f1de9fbe63ec2b65fe335cb7bb3b SHA1: 265c80d2c8ab6a6195f9c67da97ed07913f4a902 SHA256: 633c65d68c58d0040c00cb31c51aae215bfbd4a7640948f11d4060406f5dc477 Section: net Priority: optional Homepage: https://github.com/thomas-krenn/check_ipmi_sensor_v3 Description: Nagios/Icinga plugin to check IPMI sensors using FreeIPMI This plugin uses FreeIPMI tools to check IPMI sensors. Sensors can be checked all at once, in groups, or individually. Performance data is provided. Package: monitoring-plugins-isg-wpm-sensor Version: 0.1.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 58 Depends: python3 (>= 3.8) Filename: all/monitoring-plugins-isg-wpm-sensor_0.1.0-1_all.deb Size: 16836 MD5sum: 27780aafad0a50da08ca7534d8701d05 SHA1: c01340a2a98a8feafae8a623e38074f711239b9d SHA256: ca2f7873514e25c0282ec05951bf83931b85c1409fcc050ca40f8fa56a802b86 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_isg_wpm_sensor Description: Checks Stiebel Eltron heat pumps with WPM via Modbus TCP of the ISG Checks a Stiebel Eltron heat pump with a heat pump manager WPM (WPMsystem, WPM 3, WPM 3i) via the Modbus TCP interface of the Internet Service Gateway (ISG web with the Modbus TCP/IP software extension). Supports checking a numeric value against thresholds (-c may be smaller than -w), that one value stays above or below another by a margin, a boolean expression over pumps and status bits, a regular expression against a coded value such as the operating mode, and faults and bus errors. The plugin only reads registers. Package: monitoring-plugins-jitsi Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: python3-requests Filename: all/monitoring-plugins-jitsi_0-0_all.deb Size: 5118 MD5sum: 334b30de72388b0d98873d96bd16fd47 SHA1: 486a4fbe1a3b637540b746b6d4a64fa2f840d45a SHA256: 38cd206eb0e9b1c1efb67bd7dc28e43dbf71e9cf4156e2db474ad7ef8ebad97f Section: libs Priority: optional Description: Uses jitsi's JVB API to optain statistics from jitsi services. Package: monitoring-plugins-linux-raid Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Conflicts: nagios-plugins-linuxraid Replaces: nagios-plugins-linuxraid Filename: all/monitoring-plugins-linux-raid_0-0_all.deb Size: 3932 MD5sum: fc82f059315002df0937841911a172bb SHA1: 119cef148b4c5fcbd007faec172cf4b573e49403 SHA256: fcc3767280d183fe01878b8ab48940c5d2d902c9277d1aa41ea92d3883ab0712 Section: libs Priority: optional Description: This plugin checks the status of a local Linux software RAID via the /proc/mdstat interface. Package: monitoring-plugins-mailq Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: perl, monitoring-plugins-common Filename: all/monitoring-plugins-mailq_0-0_all.deb Size: 8032 MD5sum: 5885a88e0ce7e45643a06ff77228a17b SHA1: 034dee448d7bb75af8a4062f72b29dd611a497e0 SHA256: 060ddedede9b89c4ae8f7435c18586d4927bf361023d3556bbfa4acd4f07086c Section: libs Priority: optional Description: Checks the mail queue length via mailq/qmail-qstat, autodetecting or selecting sendmail, postfix, qmail, exim or nullmailer. Package: monitoring-plugins-mem Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: procps, gawk Filename: all/monitoring-plugins-mem_0-0_all.deb Size: 3424 MD5sum: 4d3bc1201e0bd3546ca793b232dd093e SHA1: 98252e360f022c1a8b63054afb7e2c6a66211498 SHA256: f629c38faff9a787ca493dd6fa40f3939d9c85dcfc0c60aeb97a2aa92d187376 Section: libs Priority: optional Description: Uses command free to get free (buffered or unused) memory. Package: monitoring-plugins-nextcloud Version: 0.3-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-nextcloud_0.3-2_all.deb Size: 11042 MD5sum: e80a7ddc2a82ce86838feab4a54f1e44 SHA1: 595cc8c5280b767e381a46db9a6995db116d3656 SHA256: c29429e24b04f14479549f96b383540d7f96b18403013c1b90ed7e371558ad0f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_nextcloud Description: Nagios/Icinga plugin to check a Nextcloud instance Nagios/Icinga plugin for Nextcloud, written in Python 3 with the standard library only. The health mode reads the unauthenticated status.php, every other mode reads the REST API of the serverinfo app. . Modes: * health: is the instance installed, out of maintenance mode and answering * cpu: the load average of the server * memory: the RAM and swap usage of the server * freespace: the free space of the data directory * storage: files, users, storages and database size * users: the number of recently active users * apps: the number of apps with an available update * rotate: replaces the app password, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-nfs-health Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: gawk, bc Filename: all/monitoring-plugins-nfs-health_0-0_all.deb Size: 5886 MD5sum: 8bb0391ec81c86015e8c8e0d49c585d5 SHA1: 371abe74ed67942ae0f3e409074c047fc6ea36ad SHA256: a50a8593f681921dbc6fb5093e7d7dcc7f1ad3af4eef44078f22c460978074a6 Section: libs Priority: optional Description: Checks status and health of a nfs server. Package: monitoring-plugins-ntrip-caster Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-ntrip-caster_0.1-1_all.deb Size: 9334 MD5sum: 2149af6b7fb50bd63668641689e49dad SHA1: 8518cb32a00e2326daa42d2e28421731f629689d SHA256: 07e674f8c5de698e5fbe905eaa5694b8fcfffa9c418f3da155d633310d16a0e8 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_caster Description: Nagios/Icinga plugin to check NTRIP casters Nagios/Icinga plugin that checks whether an NTRIP caster serves current GNSS correction data, written in Python 3 with the standard library only. . Modes: * sourcetable: complete sourcetable, caster clock and a listed mountpoint * stream: valid RTCM3 data and the age of the newest observation epoch . The stream mode decodes the observation epochs of GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS and NavIC messages and compares them with the local clock. Package: monitoring-plugins-nvidia-smi-temperature Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-nvidia-smi-temperature_0.1-1_all.deb Size: 3448 MD5sum: acf03adf5a92e11ed1650f3ab3cf83a9 SHA1: bd399e80acb0054214a7ddd6bf5c39c024109717 SHA256: 2095ff6e8322c18ccf6ac19f3aae3d66d5d4808dcc06ab936f2c8266821a003c Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi_temperature Description: Checks NVIDIA GPU temperatures via nvidia-smi Uses nvidia-smi to check the temperature of one or more NVIDIA GPUs. Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-openvpn Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 Filename: all/monitoring-plugins-openvpn_0-0_all.deb Size: 5436 MD5sum: f2d5b0f7fe845beb14ec241526be7d39 SHA1: 5e9c17f0f6c9da5fcb49b60c4bed7853708548ee SHA256: 239a11baf2bc17499cb50852e3b76dd8c3387035bff0f024fd782068da29096d Section: libs Priority: optional Description: Check if an OpenVPN server runs on a given UDP or TCP port. Package: monitoring-plugins-part-db Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 58 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-part-db_0.2-1_all.deb Size: 18326 MD5sum: b99648d11a5d2cea0c85503c486278e4 SHA1: e10671657301d43bd05b771f64aa7a0e46281a91 SHA256: ea6e62e43680301e692d65fdaf6a6e4c764e761fa708922123ac1e8f8c5fe0fb Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_part-db Description: Nagios/Icinga plugin to check a Part-DB instance Nagios/Icinga plugin for Part-DB (https://github.com/Part-DB/Part-DB-server), usable with Nagios, Naemon, Icinga and anything else speaking the monitoring plugins API. It queries the Part-DB REST API and, for the frontend check, its web UI, so the monitoring host needs only network access and an API token. . Modes of check_part-db: * health: API reachability, token validity, database answer * web: web frontend response and TLS certificate expiry * stats: counts of parts, categories, footprints, suppliers * stock: parts below their configured minimum amount * token: days until the API token expires, CRITICAL below 30 . Only the Python 3 standard library is used. Package: monitoring-plugins-podman Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: python3 (>= 3.7), sudo Recommends: podman Filename: all/monitoring-plugins-podman_0.1-1_all.deb Size: 8530 MD5sum: b2c7a3b2b9c9243d3d2692e64381d8c3 SHA1: 1be995cb5547a445c26bd64356b88ae997eb70d3 SHA256: e91f9236b8c7394fa1ceaf03056998c260b12a99292f61bb5d67e9332515b892 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_podman Description: Nagios/Icinga plugin to check the containers of a rootless podman user Nagios/Icinga plugin that checks the containers of a rootless podman user via sudo, written in Python 3 with the standard library only. . It checks that every container is running, reports CPU, memory, network and block I/O usage of each as performance data, and alerts when a container gets close to its memory limit. It needs a NOPASSWD sudoers rule for "podman ps" and "podman stats" as the rootless user, and lingering for that user; see the README. Package: monitoring-plugins-postfix-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: postfix Filename: all/monitoring-plugins-postfix-queue_0-0_all.deb Size: 3494 MD5sum: f2e0d548b5c547d61adf235d4987fef3 SHA1: deb1f2f350f5c626efbb8d6142202c9af49291ec SHA256: 3c8fe4f52426d2d18892cad1ca7038447ff1d7b13c060b1a7d7dbcc41613226c Section: libs Priority: optional Description: Uses mailq to check the length of the queue of postfix. Package: monitoring-plugins-printer-php Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 40 Depends: php-cli, php-snmp Filename: all/monitoring-plugins-printer-php_0-0_all.deb Size: 7678 MD5sum: f5a2af3d9ecc51b6293547616662180d SHA1: 2650709a6fea31f295f6094e717052c304b0a821 SHA256: a1e0df9441c359fc1f0f034bf16bbb19cd562fab7da5017d100b35bcaed80d6f Section: libs Priority: optional Description: Advanced printer check supporting multiple vendors (HP, Kyocera, Ricoh, Nec, Lexmark, NRG) via SNMP. Reads paper tray status, toner/ink levels, hardware part status, internal page counters and alert status. Named check_printer.php (not check_printer) since Debian's monitoring-plugins-contrib package already ships its own, different, check_printer. Package: monitoring-plugins-proxy Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: wget, bc, gawk Filename: all/monitoring-plugins-proxy_0-0_all.deb Size: 4468 MD5sum: c9de28233bf6ece686890517e7a15b7a SHA1: 0d2115c76d7271f2d551f36b755ebfce40eaea9f SHA256: 3bd9ac49ff7c0a9ca2ec8186adb62c7eef53f9122df2809b2e3765984b40987a Section: libs Priority: optional Description: Uses wget to obtain a file directly and through a proxy. Then it compares if the files are identical. Caution: lot's of websites include the time in their source code. These will be always different. Package: monitoring-plugins-raspberry-voltage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-raspberry-voltage_0-0_all.deb Size: 3806 MD5sum: 01664820f7570bb09683c3fd77c082b2 SHA1: bc5400c49a8b47a1027e3d176b07f5495a12dc6c SHA256: 0553da16d51cab7499fb7303dc7edab44eefc261136a1a7c6d8c23ea2af9ec14 Section: libs Priority: optional Description: Uses vcgencmd to report the core, sdram_c, sdram_i and sdram_p voltage rails as performance data, and checks vcgencmd get_throttled for under-voltage of the power supply. Requires vcgencmd (provided by Raspberry Pi OS's userland tools) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-remote-load Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Depends: bc, openssh-client Filename: all/monitoring-plugins-remote-load_0.1-1_all.deb Size: 3234 MD5sum: c0762f5ff27dd600d67e6f227e9ce722 SHA1: a34cdbc3b6b32f7f755b3cb4586b9ab89e8d4b53 SHA256: 351b5e520232df7b3096bd9f54fa417b60746e12995498346c94f7fc02e028d8 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_remote_load Description: Check /proc/loadavg via ssh Connects via ssh to a remote machine, reads /proc/loadavg, and checks the 1 m, 5 m and 15 m averages. Package: monitoring-plugins-reprise-server Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 28 Depends: python3 (>= 3.7) Recommends: openssh-client Filename: all/monitoring-plugins-reprise-server_0.1-1_all.deb Size: 8870 MD5sum: 97636653a32035987ee0bf37064a786c SHA1: 42502652571bbcf9977d13e2b7376878fbbfd543 SHA256: 7c3b7272ca789370ae9cdae7107ab7d90b21228af97053f5035135eabdf54c88 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_reprise_server Description: Nagios/Icinga plugin to check Reprise License Manager servers Nagios/Icinga plugin that checks a Reprise License Manager (RLM) server with rlmutil, written in Python 3 with the standard library only. . It checks that the rlm server and its ISV servers are up, reports the usage of every product as performance data, and alerts on the days until the earliest expiry of any product. rlmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-sensor Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 22 Depends: lm-sensors, bash, jq Filename: all/monitoring-plugins-sensor_0-0_all.deb Size: 4690 MD5sum: b4ea5e6e5e781db7b7dc2b9fa9bf21d0 SHA1: ab82849283333223a05c523f6492e14808003eaf SHA256: aa53a134b86ba3dd7e6b03d55c26cfb76fe309611616b5573f23321a68d01ec3 Section: libs Priority: optional Description: Uses sensors package to read hardware information like fan RPMs or temperatures. Package: monitoring-plugins-smb Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: smbclient, monitoring-plugins-common Filename: all/monitoring-plugins-smb_0-0_all.deb Size: 3216 MD5sum: eccbfb8bae47c5bb9e276ff1825f0733 SHA1: a1aeb8f2c513677aa882345368d81e3d99b59cb6 SHA256: 59d04cf6b6a0ab92404b944e3d741185ed100a11efdd766e0f8a821dd5d7c29b Section: libs Priority: optional Description: Uses smbclient to connect anonymously to a samba server. Package: monitoring-plugins-snmp-printer-supply Source: monitoring-plugins-snmp-printer Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: snmp Filename: all/monitoring-plugins-snmp-printer-supply_0.2-1_all.deb Size: 4616 MD5sum: 54277912bb1c0c85abf864f6963ed26b SHA1: a74efcd2c7c6a64a459a49a3c94b3fdf428e1783 SHA256: 024f331e475bc4474a8429a06783aec3f569b03e195845b499a304231a25c78a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_snmp_printer Description: Checks the supplies and trays of a printer via SNMP Uses snmpwalk to connect to a printer and check its supplies and the paper level of its trays. Package: monitoring-plugins-ssh-date Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: python3, openssh-client Filename: all/monitoring-plugins-ssh-date_0-0_all.deb Size: 3448 MD5sum: c0903da3e80df5ab41ee3468434c034e SHA1: 456d66c0f475b5078e314adc49502ac2f4544936 SHA256: 95596308c94f5c7f8a13ad8e63214a2cf34aa722a428df04678d44fd4bd26479 Section: libs Priority: optional Description: Uses ssh to run "date -R" on a remote host and compares the result to the local date and time to detect clock drift. Package: monitoring-plugins-ssl-cert Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 292 Depends: openssl Filename: all/monitoring-plugins-ssl-cert_0-0_all.deb Size: 49738 MD5sum: 9437428b128cb90012dc835d53f85ff4 SHA1: 95b403a7d8a0a8a5ed2d190cb8d4030322151883 SHA256: 19bd368364d951947df2f9cd885faa335cf23db01cf525c3fadbb6e1a3cab146 Section: libs Priority: optional Description: Uses openssl to check validity, expiration and other properties of X.509 certificates. See https://github.com/matteocorti/check_ssl_cert. Package: monitoring-plugins-stun-turn Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-stun-turn_0.1-1_all.deb Size: 9728 MD5sum: e41e07da476e61525411545faee5dc21 SHA1: 096bcec3948c6d62e3a7a2cee682b13fc9bed9cd SHA256: cc7d98e189a7b2962b2bc871b76a2bd2a4355d0e1ad86d83f6e00960ca444f70 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_stun_turn Description: Nagios/Icinga plugin to check STUN/TURN servers Nagios/Icinga plugin for STUN/TURN servers such as coturn, written in Python 3 with the standard library only. . Modes: * stun: binding request, mapped address and response time * turn: authentication challenge, or with credentials (long-term or the shared secret of the TURN REST API) a relay allocation that is released again . Both modes work over UDP, TCP and TLS and check the TLS certificate. Package: monitoring-plugins-systemd-service Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-systemd-service_0-0_all.deb Size: 3404 MD5sum: 0380c5f9e5b647f21a0b2725e55870c4 SHA1: 8eb460746450e0681136d5d015ba2dc7576a89fc SHA256: 398d4183d38b932e4637f5846d9839cbacf4d49880d7fa0a9e89fbb1f91b7857 Section: libs Priority: optional Description: For a *.service it checks if it is prestent, enabled and alive. Extension for openSUSE: also check is a mountpoint is active. Package: monitoring-plugins-systemd-sh Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Depends: openssh-client, systemd Filename: all/monitoring-plugins-systemd-sh_0.2-1_all.deb Size: 4988 MD5sum: 16ad1fe6031f05ad36ea1c7dfbf336a7 SHA1: 9c90ce10ff1cbedc1ce5f62c109e643d8df74777 SHA256: 3d3fca040dbf98ce6ebfe972116a4a150ac0a3e80d8853e091734eb3ea3807e9 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_systemd.sh Description: Nagios/Icinga plugin to check failed systemd units and the boot time Checks systemd on a local or remote machine via systemctl: the boot time, failed units, and services that have to be running. Package: monitoring-plugins-tasmota-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.8), python3-requests Filename: all/monitoring-plugins-tasmota-sensor_0.2.1-1_all.deb Size: 11358 MD5sum: fe40583520f387cfe4d3df358e141aba SHA1: 498b4db80c42a921c1c7e17a2eaf8f5c7098a69f SHA256: a7ba8a1076168ff4be7e21556dc61ea002c21b10e19b66815f656f92f6d15daf Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tasmota_sensor Description: Checks Tasmota devices via the HTTP command API Checks Tasmota devices via the HTTP command API (/cm?cmnd=...). Supports checking a numeric sensor value against thresholds (-c may be smaller than -w), the time offset of the device's own reported time against the local clock or an NTP server, a boolean expression over POWER-style relay states, and a regular expression match against a sensor field's value. Package: monitoring-plugins-tftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: tftp Filename: all/monitoring-plugins-tftp_0-0_all.deb Size: 3294 MD5sum: 852c6b4da5a191363133b3a3d7274163 SHA1: 9ffc65fe96fad2c4fde382794a289dacec1ffe47 SHA256: 9ba9c9cc2a988b6352d036c0458da9913539052e9c9b719c472c4b4cc0e59954 Section: libs Priority: optional Description: Uses tftp to connect to a tftpd and checks if a file with a known name can be downloaded. Package: monitoring-plugins-thermal-zone0 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-thermal-zone0_0-0_all.deb Size: 3432 MD5sum: f64d5282cf1513bfa60a2a6a3de9c7eb SHA1: 7beb06b900d1ca5a7442c5678c91b3670bc5048b SHA256: 97efa61b7ec20ee7ba11bc60b698752f9adbac04f746c6b5d86d4960e1473605 Section: libs Priority: optional Description: Reads /sys/class/thermal/thermal_zone0/temp to check the SoC/board temperature, as found on Raspberry Pi and many other ARM boards. Package: monitoring-plugins-tor-proxy Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 22 Depends: curl | wget Filename: all/monitoring-plugins-tor-proxy_0.2-1_all.deb Size: 5732 MD5sum: 480c3e8565a15b595b4a316a956789e6 SHA1: 70ff8aa67c0beb04ebd6f12fdc39d5f85c316cb6 SHA256: 3b50422efea7ca855ac3930b13c920d38ac80a0ce1d4a9fd898375725898b0a1 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tor_proxy Description: Nagios/Icinga plugin to check that a proxy exits to the Tor network Nagios/Icinga plugin that checks whether a proxy exits to the Tor network, by asking the check service of the Tor Project through it. Works with SOCKS proxies such as Tor itself and HTTP proxies such as Privoxy in front of Tor, using curl or wget; SOCKS proxies need curl. Package: monitoring-plugins-ts3 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: expect Filename: all/monitoring-plugins-ts3_0-0_all.deb Size: 3434 MD5sum: 7b5df997bb5db28f5325a7ebec590c9a SHA1: 7e7027b5aa3e7fb6eabadd8707366a7dfcbd9a98 SHA256: 1bf4d0f68351c725cc8bf8e60012ecddc6860f23462bba4deaea2ed71e38f35b Section: libs Priority: optional Description: Connects to the dataport of a teamspeak server and checks for its characterstic respone. Package: monitoring-plugins-vdr-diskusage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, gawk Filename: all/monitoring-plugins-vdr-diskusage_0-0_all.deb Size: 3820 MD5sum: 790bcdd9181b4c03bc56ad5157811c7b SHA1: 23a473c10d141b591aa932bd72ace12b32d131a1 SHA256: f6372be2afb3b605fad508645bbe34746cbf454e6cdb958c762e79709ab84072 Section: libs Priority: optional Description: Uses svdrpsend to check disk utilization of VDR. Package: monitoring-plugins-vdr-signalstrength Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, vdr-plugin-femon Filename: all/monitoring-plugins-vdr-signalstrength_0-0_all.deb Size: 4046 MD5sum: 3553f38bb59819cacf98d581fcda39d7 SHA1: fc2881d60a9af9f346233a28b3f6d6fad66f25b3 SHA256: 37c678177a0b64f7e54a67d4810cd0a3947533ce3b0ced3d7af9da0752bf11a3 Section: libs Priority: optional Description: Uses svdrpsend to connect to a VDR using the femon plugin. Package: monitoring-plugins-zyxel-hw-monitor Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 52 Depends: snmp, gawk | mawk Recommends: python3 Filename: all/monitoring-plugins-zyxel-hw-monitor_0.1-1_all.deb Size: 7976 MD5sum: 9433f8b4e95b5ea66e49a79c6e84ab71 SHA1: e38668128326bddc8907912347fa83b52191ded5 SHA256: 71f3d38a37a091e393a3c2cac11cd745a4b7cd7b9014ffba28b32cdcbe14fd64 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_zyxel_hw_monitor Description: Nagios/Icinga plugins to check Zyxel devices via SNMP Plugins for monitoring Zyxel devices via SNMP, based on the ZYXEL-HW-MONITOR-MIB and ZYXEL-ES-COMMON MIBs. They are compatible with Nagios, Icinga and other monitoring systems supporting Nagios plugins. . Included checks: * check_zyxel-cpu: CPU usage (%) * check_zyxel-mem: memory usage (%) * check_zyxel-flash: flash usage (%) * check_zyxel-fan: fan RPM (indexed sensor) * check_zyxel-temperature: temperature (indexed sensor) * check_zyxel-voltage: voltage (indexed sensor) * check_zyxel-power: power source status (indexed source) * check_zyxel-time: switch time skew against an NTP server or local time . All plugins use numeric OIDs, so no MIB files are needed on the monitoring host. SNMPv2c and SNMPv3 are supported. Package: mqtt2logger Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 60 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3 (>= 3.7), python3-paho-mqtt, python3-yaml Filename: all/mqtt2logger_0.1-1_all.deb Size: 15068 MD5sum: 011d0f0b5f5aff51526b5f314fe273b4 SHA1: 11800b230c25af8c10de5fda715476a99e9cf17c SHA256: 44a04409c87288ee16eee245e1d5480eb56b44af1e697433ecd9121a52cccc69 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/mqtt2logger Description: Forward the MQTT logs of ESPHome and Tasmota devices to rsyslog and journald Subscribes to the log topics of ESPHome and Tasmota devices on an MQTT broker and forwards each log line to rsyslog (RFC 5424, with the device as host name) and to systemd-journald, each configurable. Severity and time stamp are taken from the messages where they contain them. A persistent MQTT session lets the broker keep QoS 1 messages while the daemon is down, and queues keep messages while rsyslog or journald are unavailable. The systemd service runs as the user mqtt2logger and is not enabled by default. Package: purge-postfix-mails Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Depends: jq (>= 1.6), postfix (>= 3.1) Filename: all/purge-postfix-mails_0.3-1_all.deb Size: 4320 MD5sum: 70c6d753ba9c4c91edeaa941117a4847 SHA1: 1588c728ce5b3ea11fa4d972be2a5bbbbe4185ed SHA256: 38af5d98614eea7f644fa1f61490d8e26e4c62fb609c8ba30016f40379c4fcad Section: mail Priority: optional Homepage: https://github.com/Aikhjarto/purge_postfix_mails Description: Scripts to break a mail loop by purging undeliverable mails from Postfix Scripts that break a mail loop in Postfix, as caused by a machine mailing its admin about every logged error while the relayhost is unreachable, by deleting the queued mails that cannot be delivered: * purge_postfix_mailer_daemon.sh deletes bounces, mails to postmaster@myorigin and queued mails that mention postmaster or MAILER-DAEMON of myorigin * purge_postfix_mails.sh additionally deletes deferred mails the relayhost refused * purge_postfix_per_recipient.sh deletes the mails to given recipients * purge_postfix_per_sender.sh deletes the mails from given senders Package: rsyslog-maillog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: rsyslog Filename: all/rsyslog-maillog_0.1-1_all.deb Size: 7078 MD5sum: 4debb6fcec3b12e2e8009ba2a4cce2f6 SHA1: 5d63e064c71270f4fb5a152b467a5531bae7e8fe SHA256: 4a14b36b5151976e38599bcdb466b030e434e067c7bcc0c41b0a61164a5cd6c7 Section: admin Priority: optional Homepage: https://github.com/Aihjarto/rsyslog-maillog Description: This project provides a config for forwarding important log lines in rsyslog via postfix. Package: vm-boot-order-2 Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7), python3-libvirt Recommends: sysstat Filename: all/vm-boot-order-2_0.2-1_all.deb Size: 10828 MD5sum: 2465f0646133632c6dbac539cdcf2ba8 SHA1: c56b903346e90c2061cba67644b4794913726645 SHA256: 9b4bfe8b7eda26a67b206495a6109afefb23a38dd8b50c4db71bf7a0c76d8792 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/vm-boot-order-2 Description: Start libvirt VMs in order at boot and shut them down in parallel Starts libvirt VMs one after another in a configured order at boot, and shuts them down in parallel at system shutdown. After starting a VM, it waits up to a configured time, or until the I/O load of a configured disk drops, before starting the next one. At shutdown, VMs that do not stop within a timeout are powered off. . The service is installed but not enabled. Configure the VMs in /etc/vm-boot-order-2.conf, check it with "vm-boot-order-2.py status", and disable libvirt autostart for those VMs.