From: Dave Houghton (davehoughton@mulinux.free-online.co.uk)
Date: Sat Dec 18 1999 - 07:03:18 CET
On 17 Dec 1999, Clive Wright <clive_wright@telinco.co.uk> wrote:
<snip>
>As requested my extensa.conf (minus the remarks and some extraneous
>settings).
>I am also using the sound-7 module, but still think that the problem
>lies with playcd as "cat /dev/sndstat" does not display anything
>unexpected.
>
>(DEBUG)
>(READPORT 0x203)
>(ISOLATE)
>(IDENTIFY *)
>
>(CONFIGURE ESS1868/-1 (LD 0
>(IO 0 (BASE 0x0800))
>(ACT Y)
>))
>
>
>(CONFIGURE ESS1868/-1 (LD 1
>
># Instead of (IO 0 (BASE 0x0220)), disable SB:
>(INT 0 (IRQ 7 (MODE +E)))
>(IO 0 (BASE 0x0220))
>(IO 1 (BASE 0x0388))
>(IO 2 (BASE 0x0310))
Clive check that one should be BASE 0x0330, but if your file definately says 0x310 then leave it at that.
>(DMA 0 (CHANNEL 1))
>(DMA 1 (CHANNEL 0))
>(ACT Y)
>))
I assume you haven't left out the "(SIZE xx) from your BASE lines in your working version. Have you configured the logical device ESS001 (mixer control port) as well? You haven't shown it but if you don't configure this then the mixer will not be activated and the volume etc will act in the fractured way you describe. At the moment I am repeating the same track over and over and have no problems with random repeat positions so I am at a loss to suggest anything to you for this. I've just killed the track after 30 uneventfull repeats 'cause fine though Bach played by the Orchestra da Camera di Roma is (well muLinux is Italian after all) it's becoming a bit monotonous.
Here's my extensa.conf ( minus 4 modems tape drive and ethernet card) and output from cat /dev/sndconf
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Logical device id ESS0000
(CONFIGURE ESS1868/-1 (LD 0
(IO 0 (SIZE 8) (BASE 0x0800))
(NAME "ESS1868/-1[0]{ESS ES1868 Plug and Play AudioDrive}")
(ACT Y)
))
(CONFIGURE ESS1868/-1 (LD 1
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 0))
(INT 0 (IRQ 5 (MODE +E)))
(IO 0 (SIZE 16) (BASE 0x0220))
(IO 1 (SIZE 4) (BASE 0x0388))
(IO 2 (SIZE 2) (BASE 0x0330))
(NAME "ESS1868/-1[1]{ESS ES1868 Plug and Play AudioDrive}")
(ACT Y)
))
# Logical device id ESS0001
(CONFIGURE ESS1868/-1 (LD 2
(IO 0 (SIZE 1) (BASE 0x0201))
(NAME "ESS1868/-1[2]{ESS ES1868 Plug and Play AudioDrive}")
(ACT Y)
))
(WAITFORKEY)
cat /dev/sndstat
Sound Driver:3.5.4-960630 (Thu Dec 24 18:12:04 CCT 1998 root,
Linux sanvittore 2.0.34 #3 Sun Nov 29 14:17:48 GMT 1998 i586 unknown)
Kernel: Linux mulinux 2.0.36 #12 Mon Feb 22 03:33:33 CCT 1999 i586
Config options: 80002
Installed drivers:
Type 2: Sound Blaster
Card config:
Sound Blaster at 0x220 irq 5 drq 1,5
Audio devices:
0: ESS ES1688 AudioDrive (rev 11)
Synth devices:
Midi devices: NOT ENABLED IN CONFIG
Timers:
0: System clock
Mixers:
0: Sound Blaster
Don't know if this helps?
>
>Anyone else had any problems?? Or is it only Dave and I who have used
>playcd?
>
>Clive
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk
>For additional commands, e-mail: mulinux-help@sunsite.auc.dk
>
>
>
>
>
------
Dave g0mxw
muLinux U.K. mirror
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk
For additional commands, e-mail: mulinux-help@sunsite.auc.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:12 CET