Linux version 2.4.21-rmk1-pxa1 (root@localhost.localdomain) (gcc version 3.3.2) #6 Fri Mar 12 13:57:13 EST 2004
CPU: XScale-Bulverde revision 2
Machine: Intel DBBVA0 Development Platform
Ignoring unrecognised tag 0x00000000
Run Mode clock: 143.00MHz (*11)
Turbo Mode clock: 429.00MHz (*3.0, inactive)
Memory clock: 71.50MHz (Alt=0, SDCLK[0]=/2, SDCLK[1]=/2)
System bus clock: 71.50MHz 
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs nfsroot=192.168.1.100:/nfs/ ip=192.168.1.101:192.168.1.100::::: console=ttyS0,115200n8
Relocating machine vectors to 0xffff0000
Console: colour dummy device 80x30
Calibrating delay loop... 142.54 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62556KB available (1819K code, 332K data, 80K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Init freq:429000kHz.
Registering CPU frequency change support.
CPU clock: 429.000 MHz (13.000-520.000 MHz)
CPU voltage: 1.400 mV (0.650-1.400 mV)
Register device ipmc successgul.
 Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Console: switching to colour frame buffer device 80x30
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 22) is a PXA UART
ttyS01 at 0x0000 (irq = 21) is a PXA UART
ttyS02 at 0x0000 (irq = 20) is a PXA UART
SA1100 Real Time Clock driver v1.00
smc91x.c: v1.0, mar 07 2003 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at 0xf1000300 IRQ 194 [nowait]
eth0: Ethernet addr: 00:06:34:00:24:0b
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem driver Revision: 1.00
Probing Mainstone flash at physical address 0x00000000 (32-bit buswidth)
0: offset=0x0,size=0x10000,blocks=4
1: offset=0x40000,size=0x40000,blocks=127
Using buffer write method
Using static partition definition
Creating 3 MTD partitions on "Mainstone flash":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00240000 : "Kernel"
0x00240000-0x02000000 : "Filesystem"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-ohci.c: USB OHCI at membase 0xfe000000, IRQ 3
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Setting port 3 power failed.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
vendorID: dead productID: beef
mice: PS/2 mouse device common for all mice
pxa_ir: pm registered
pxa_ir: irda driver inited
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
eth0: PHY=LAN83C183 (LAN91C111 Internal)
input0: USB HID v1.10 Keyboard [SOLIDTEK USB Composite Keyboard] on usb1:2.0
input1,hiddev0: USB HID v1.10 Pointer [SOLIDTEK USB Composite Keyboard] on usb1:2.1
eth0: Ethernet Link Detected
eth0: PHY 100BaseT
eth0: PHY Full Duplex
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
      device=eth0, addr=192.168.1.101, mask=255.255.255.0, gw=255.255.255.255,
     host=192.168.1.101, domain=, nis-domain=(none),
     bootserver=192.168.1.100, rootserver=192.168.1.100, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.1.100
Looking up port of RPC 100005/1 on 192.168.1.100
VFS: Mounted root (nfs filesystem).
Freeing init memory: 80K
