Linux version 2.6.9 (root@yyin) (gcc version 3.4.3) #2 Wed Dec 15 10:29:06 CST 2004
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE)
CPU: D undefined 5 cache
CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: Intel HCDDBBVA0 Development Platform (aka Mainstone)
Memory policy: ECC disabled, Data cache writeback
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 208.00MHz (*1.0, active)
Memory clock: 104.00MHz (/2)
System bus clock: 104.00MHz 
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:4
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/nfs ip=192.168.1.101:::::: nfsroot=192.168.1.100:/workspace/rootfs/ console=ttyS0,115200 mem=64M
Relocating machine vectors to 0xffff0000
IRQ8 (GPIO0): falling edges
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62624KB available (1685K code, 390K data, 88K init)
Calibrating delay loop... 207.66 BogoMIPS (lpj=1038336)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Linux Kernel Card Services
  options:  none
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
lcd freq:10400
lcd freq:10400
Console: switching to colour frame buffer device 30x40
ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
smc91x.c: v1.0, mar 07 2003 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at 0xc4852300 IRQ 163 DMA 16 [nowait]
eth0: Ethernet addr: 00:02:b3:00:c9:82
eth0: PHY LAN83C183 (LAN91C111 Internal)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Using anticipatory io scheduler
enable_irq(170) unbalanced from c0135e40
enable_irq(174) unbalanced from c0135e40
mice: PS/2 mouse device common for all mice
input: mainstoneIII keypad!
platform bus: mainstoneIII keypad device!
input: mainstoneIII keypad driver!
ac97_codec: AC97 Audio codec, id: PSC4 (Philips UCB1400)
IRQ9 (GPIO1): rising falling edges
IRQ34 (GPIO2): rising falling edges
IRQ35 (GPIO3): rising falling edges
IRQ36 (GPIO4): rising falling edges
IRQ37 (GPIO5): rising falling edges
IRQ38 (GPIO6): rising falling edges
IRQ39 (GPIO7): rising falling edges
IRQ40 (GPIO8): rising falling edges
IRQ41 (GPIO9): rising falling edges
IRQ42 (GPIO10): rising falling edges
IRQ44 (GPIO12): rising falling edges
IRQ46 (GPIO14): rising falling edges
IRQ49 (GPIO17): rising falling edges
IRQ51 (GPIO19): rising falling edges
IRQ54 (GPIO22): rising falling edges
IRQ55 (GPIO23): rising falling edges
IRQ56 (GPIO24): rising falling edges
IRQ57 (GPIO25): rising falling edges
IRQ58 (GPIO26): rising falling edges
IRQ59 (GPIO27): rising falling edges
IRQ64 (GPIO32): rising falling edges
IRQ74 (GPIO42): rising falling edges
IRQ75 (GPIO43): rising falling edges
IRQ76 (GPIO44): rising falling edges
IRQ78 (GPIO46): rising falling edges
IRQ79 (GPIO47): rising falling edges
IRQ85 (GPIO53): rising falling edges
IRQ113 (GPIO81): rising falling edges
IRQ114 (GPIO82): rising falling edges
IRQ115 (GPIO83): rising falling edges
IRQ116 (GPIO84): rising falling edges
IRQ118 (GPIO86): rising falling edges
IRQ119 (GPIO87): rising falling edges
IRQ120 (GPIO88): rising falling edges
IRQ121 (GPIO89): rising falling edges
IRQ122 (GPIO90): rising falling edges
IRQ123 (GPIO91): rising falling edges
IRQ124 (GPIO92): rising falling edges
IRQ127 (GPIO95): rising falling edges
IRQ128 (GPIO96): rising falling edges
IRQ141 (GPIO109): rising falling edges
IRQ142 (GPIO110): rising falling edges
IRQ143 (GPIO111): rising falling edges
IRQ144 (GPIO112): rising falling edges
IRQ146 (GPIO114): rising falling edges
IRQ147 (GPIO115): rising falling edges
IRQ148 (GPIO116): rising falling edges
IRQ149 (GPIO117): rising falling edges
IRQ150 (GPIO118): rising falling edges
IRQ151 (GPIO119): rising falling edges
IRQ152 (GPIO120): rising falling edges
IRQ153 (GPIO121): rising falling edges
IRQ154 (GPIO122): rising falling edges
IRQ155 (GPIO123): rising falling edges
IRQ156 (GPIO124): rising falling edges
IRQ157 (GPIO125): rising falling edges
IRQ158 (GPIO126): rising falling edges
IRQ159 (GPIO127): rising falling edges
enable_irq(164) unbalanced from c0140154
UCB1x00 Touchscreen Controller Driver.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
eth0: link down
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
      device=eth0, addr=192.168.1.101, mask=255.255.255.0, gw=255.255.255.255,
     host=192.168.1.101, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=192.168.1.100, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.100
eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Looking up port of RPC 100005/1 on 192.168.1.100
VFS: Mounted root (nfs filesystem) readonly.
Freeing init memory: 88K
