Linux version 2.4.19-rmk7-pxa1 (root@localhost.localdomain) (gcc version 3.2.1) #2 Thu May 8 16:57:46 CST 2003
CPU: XScale-PXA255 revision 6
Machine: Intel DBPXA250 Development Platform
Ignoring unrecognised tag 0x00000000
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 199.07MHz (*1.0, inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs nfsroot=192.1.1.1:/nfsboot ip=192.1.1.2:192.1.1.1::::: console=ttyS0,115200n8 mem=64M
Relocating machine vectors to 0xffff0000
Console: colour dummy device 80x30
Calibrating delay loop... 198.65 BogoMIPS
Memory: 64MB = 64MB total
Memory: 63052KB available (1357K code, 302K data, 80K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
SA1111 Microprocessor Companion Chip: silicon revision 1, metal revision 1
Using PXA255 frequency points.
Registering CPU frequency change support.
CPU clock: 199.065 MHz (99.000-400.000 MHz)
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Console: switching to colour frame buffer device 40x30
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
SA1100 Real Time Clock driver v1.00
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ac97_codec: AC97 Audio codec, id: 0x5053:0x4304 (Philips UCB1400)
smc91x.c: v1.0, mar 07 2003 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C94 (rev 9) at 0xf1000c00 IRQ 162 [nowait]
eth0: Ethernet addr: 00:08:33:33:00:01
Probing Lubbock flash at physical address 0x00000000 (32-bit buswidth)
Lubbock flash: Found an alias at 0x2000000 for the chip at 0x0
0: offset=0x0,size=0x40000,blocks=128
Using buffer write method
No RedBoot partition table detected in Lubbock flash
Using static partition definition
Creating 3 MTD partitions on "Lubbock flash":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00140000 : "Kernel"
0x00140000-0x02000000 : "Filesystem"
Linux Kernel Card Services 3.1.22
  options:  [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
      device=eth0, addr=192.1.1.2, mask=255.255.255.0, gw=255.255.255.255,
     host=192.1.1.2, domain=, nis-domain=(none),
     bootserver=192.1.1.1, rootserver=192.1.1.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
Looking up port of RPC 100003/2 on 192.1.1.1
Looking up port of RPC 100005/1 on 192.1.1.1
VFS: Mounted root (nfs filesystem).
Freeing init memory: 80K
