=Ver: 2.0 ##---------------------------------------- =Pkg: FA_clalsadrv 1.1.0 0.jacklab.1 i586 =Sum: Shared library required to build Aeolus, JAAA +Des: Shared library required to build Aeolus. Author: Fons Adriaensen -Des: ##---------------------------------------- =Pkg: FA_clthreads 2.2.0 0.jacklab.1 i586 =Sum: Shared library required to build Aeolus, JAAA +Des: Shared library required to build Aeolus and JAAA. Author: Fons Adriaensen -Des: ##---------------------------------------- =Pkg: FA_clxclient 3.3.0 0.jacklab.1 i586 =Sum: Shared library required to build Aeolus, JAAA +Des: Shared library required to build Aeolus and JAAa. Author: Fons Adriaensen -Des: ##---------------------------------------- =Pkg: LegaSynth 0.4.1 0.jacklab.1 i586 =Sum: LegaSynth is an old chip/synthethizer emulator +Des: LegaSynth is an old chip/synthethizer emulator. It currently uses the ALSA sequencer API, but could easily be expanded to use others as well. LegaSynth supports OSS/JACK wave output drivers. Current engines proovide very precise emulation of: * Yamaha DX7 FM * MOS6581 Sound Interface Device (or best known as the good old C64 SID :) * Yamaha YMH2K (Soundchip very popular in small Yamaha keyboards/Arcades and the Sega GENESIS) LegaSynth Programming Framework: LegaSynth is also a very powerful synthethizer programming framework, where, with only a few lines of code you can have your own engine. A simple demo engine and some documentation are aviable within the documentation directory /usr/share/doc/packages/LegaSynth. The difference between LegaSynth and other programs such as Reaktor or Bristol, is that here the engines have to be actually programmed :). LegaSynth proovides you with: * Midi Driver Handling. * Midi Event Handling. * Voice Parameters Handling: You don't need to parse/write specific midi bank/controller/pitch/key code, legasynth takes care of all that. * Smart "Voice" base class: Your voice is notified of noteon/noteoff, and then asked to mix into a buffer, at mix time you retrieve the frequency/volume and run your code. If you think the note finished its job, just change the status to "dead" * Voice Allocation: LegaSynth does all voice allocation/handling job. * Bank/Patch/Drums Config: Simply let LegaSynth know about what parameters does your voice use, and with simply that, LegaSynth will be able to create midi patches, banks, drumsets, an interface to configure patches, and ability of loading/saving them to disk. * Effect Buffers: Voices can be Chorused/Reverbed, and will soon use custom output plugins. * Wave Output: LegaSynth supports OSS/ALSA and JACK drivers. Author: Juan Linietsky -Des: ##---------------------------------------- =Pkg: adie 3.0.0 0.jacklab.1 i586 =Sum: Adie Programmer's Text Editor +Des: Adie is an extremely fast and convenient programming text editor written using the FOX Toolkit. -Des: ##---------------------------------------- =Pkg: aeolus 0.3.1 0.jacklab.3 i586 =Sum: Aeolus - a synthesised pipe organ sound +Des: Aeolus is my first attempt to arrive at a synthesised (i.e. not sampled) pipe organ sound that should be good enough to make an organist enjoy playing it. It is in fact be a soft-synth optimised for this job, with possibly hundreds of controls for each stop, to enable the user to "voice" his instrument. First presented at the 2nd LAD conference in Karlsruhe, end of April 2004. The stops-1.1 are included, see /usr/share/aeolus. Author: Fons Adriaensen -Des: ##---------------------------------------- =Pkg: aeolus 0.6.6 0.jacklab.1 i586 =Sum: Aeolus - a synthesised pipe organ sound +Des: Aeolus is my first attempt to arrive at a synthesised (i.e. not sampled) pipe organ sound that should be good enough to make an organist enjoy playing it. It is in fact be a soft-synth optimised for this job, with possibly hundreds of controls for each stop, to enable the user to "voice" his instrument. First presented at the 2nd LAD conference in Karlsruhe, end of April 2004. The stops-1.1 are included, see /usr/share/aeolus. Author: Fons Adriaensen -Des: ##---------------------------------------- =Pkg: alsa-patch-bay 1.0.0 0.jacklab.1 i586 =Sum: A graphical patch bay for the ALSA sequencer API and the JACK audio API +Des: ALSA Patch Bay is a graphical patch bay for the ALSA sequencer API and the JACK audio API. It can use FLTK or GTKmm for the interface and take advantage LADCCA session management. Author: Bob Ham -Des: ##---------------------------------------- =Pkg: amSynth 1.0.0 0.jacklab.3 i586 =Sum: A software synthesizer +Des: amSynth is a software synthesizer, taking inspiration from the original synths and latest digital ones, while keeping an intuitive interface. -Des: ##---------------------------------------- =Pkg: amSynth 1.1.0 0.jacklab.1 i586 =Sum: A software synthesizer +Des: amSynth is a software synthesizer, taking inspiration from the original synths and latest digital ones, while keeping an intuitive interface. -Des: ##---------------------------------------- =Pkg: brutefir 1.0f 0.jacklab.1 i586 =Sum: BruteFIR is a software convolution engine +Des: BruteFIR is a software convolution engine, a program for applying long FIR filters to multi-channel digital audio, either offline or in realtime. Its basic operation is specified through a configuration file, and filters, attenuation and delay can be changed in runtime through a simple command line interface. The FIR filter algorithm used is an optimised frequency domain algorithm, partly implemented in hand-coded assembler, thus throughput is extremely high. In realtime, a standard computer can typically run more than 10 channels with more than 60000 filter taps each. Through its highly modular design, things like adaptive filtering, signal generators and sample I/O are easily added, extended and modified, without the need to alter the program itself. BruteFIR is free and open-source. It is licensed through the GNU General Public License Author: Anders Torger -Des: ##---------------------------------------- =Pkg: calculator 2.0.0 0.jacklab.1 i586 =Sum: FOX-based Calculator Applet +Des: The FOX calculator is a simple desktop calculator geared towards the programmer. It supports not only a full complement of scientific functions, but also common operations that programmers need, such as bitwise operations, bitwise shifting, and base-2 logarithm and exponents, and numeric conversion between hexadecimal, octal, binary, and decimal. The FOX Calculator implements correct operator precedences, so expressions like 2+3*5 yield the correct result, which is 17, and not 25. Also featured is a constant memory, which permanently stores its value even if you exit the calculator and restart it later. -Des: ##---------------------------------------- =Pkg: cheesetracker 0.9.9 0.jacklab.3 i586 =Sum: Cheesetracker is a portable Impulse Tracker clone +Des: Cheesetracker is a portable Impulse Tracker clone. It supports all Impulse Tracker features except a few. For now the main goal is to remain at IT Feature set level, but very soon we might be adding new features to it. Supported features include: * Modular source code * Per-track lowpass filter (cutoff/resonance), with greater range than IT. * Per-instrument modular effect core (own effects/and ladspa) (WIP!) * Wave export (dump your song to wavs and post process) (WIP!) * Super-Clean mixing using the CheeseMusic lib. * All IT editing shortcuts (or most of them) * Very cool sample editor And Lacks: * MIDI Out - (go check ShakeTracker if you want this) * Sample Sustain Loops (maybe someday) Author: Juan Linietsky -Des: ##---------------------------------------- =Pkg: chionic 1.0.1 0.jacklab.1 i586 =Sum: Chionic is the most advanced sampler for Linux +Des: Chionic is the most advanced sampler for Linux. It is not meant for loading existing sampler formats (sf2/gig/akai/etc) -though making an importer could work- The main idea behind Chionic is that you can make your huge patch libraries, with thousand of patches, and then make multitimbral songs using up to 64 midi channels. All this with only one instance of chionic, and using on-demand loading. Author: Juan Linietsky -Des: ##---------------------------------------- =Pkg: cli-dssi-host 0.1.3 0.jacklab.1 i586 =Sum: A command-line tool for producing a single note from a DSSI plugin +Des: cli-dssi-host, a command-line tool for producing a single note from a DSSI plugin, and saving the resulting audio to a file. Does not include OSC or user interface support. -Des: ##---------------------------------------- =Pkg: clockloop 0.0.2 0.jacklab.1 i586 =Sum: ClockLoop is a very simple JACK application for playing back audio loops +Des: ClockLoop is a very simple JACK application for playing back audio loops. Author: Steve Harris -Des: ##---------------------------------------- =Pkg: creox 0.2.2rc2 0.jacklab.1 i586 =Sum: The Realtime Sound Effector +Des: Creox is a real-time sound processor. You can plug your electric guitar or any other musical instrument directly to the PC's sound card and start experimenting with various sound effects. Creox has a nice user-friendly GUI, a preset support, a low-latency DSP engine and each effect parameter can be altered "on the fly". It requires JACK sound server (http://jackit.sf.net/). As the creox is a JACK application, the output sound can be routed to the other JACK-aware applications and the input audio can be taken as the output from the other JACK client. Author: Jozef Kosoru -Des: ##---------------------------------------- =Pkg: didgeridoo 0.0.1 0.jacklab.1 i586 =Sum: A voice controlled, resonator based instrument for jack +Des: This is the first release of a voice controlled, resonator based instrument for the jack-audio-connection-kit. Playing it the first time it reminded me to the sound and playing technique of a didgeridoo. Thats the reason for its name. Requirements: - A microphone with near fields characteristics for instrument control. - A headphone to avoid feedback. - The jack-audio-connection-kit. - A i586 compatible system running Linux. The instrument has one build in 'default' setting. Please use this setting as a starting point for your own experiments to get somewhat familiar with its usage. Please be careful when playing it at the corner of non-linearity as the sound may break out quite loud on crossing the limit border. Please do first adjust your microphones recording level according to the default setting before you change any instrument settings. -Des: ##---------------------------------------- =Pkg: dssi-vst 0.4 0.jacklab.2 i586 =Sum: A software synthesizer plugin for DSSI +Des: The dssi-vst package contains a wrapper plugin for Windows VSTs that enables them to be used by DSSI hosts running on Linux or similar on i386, using Wine. 'VST is a trademark of Steinberg Media Technologies GmbH' - VST PlugIn Technology by Steinberg Media Technologies GmbH, - VST PlugIn Interface Technology by Steinberg Media Technologies GmbH Author: Chris Cannam -Des: ##---------------------------------------- =Pkg: fluidsynth 1.0.7a 0.jacklab.1 i586 =Sum: A Real-Time Software Synthesizer that uses Soundfont(tm) +Des: FluidSynth (formerly IIWU Synth) is based on the SoundFont(tm) 2 specifications. It is a real-time "software synthesizer". FluidSynth can read MIDI events from the MIDI input device and render them to the audio device. It can also play MIDI files. Authors: -------- Peter Hanappe Samuel Bianchini Johnathan Lee -Des: ##---------------------------------------- =Pkg: fluidsynth-debuginfo 1.0.7a 0.jacklab.1 i586 =Sum: Debug information for package fluidsynth +Des: This package provides debug information for package fluidsynth. Debug information is useful when developing applications that use this package or when debugging this package. -Des: ##---------------------------------------- =Pkg: fluidsynth-devel 1.0.7a 0.jacklab.1 i586 =Sum: Development package for the fluidsynth library +Des: This package contains the files needed to compile programs that use the fluidsynth library. Authors: -------- Peter Hanappe Samuel Bianchini Johnathan Lee -Des: ##---------------------------------------- =Pkg: fluidsynth-dssi 0.9.1 0.jacklab.1 i586 =Sum: Fluidsynth Plugin for Disposable Soft Synth Interface +Des: FluidSynth-DSSI is the plugin implementation of fluidsynth on DSSI (Disposable Soft Synth Interface) with a GTK+ GUI. Authors: -------- Sean Bolton -Des: ##---------------------------------------- =Pkg: fluidsynth-dssi-debuginfo 0.9.1 0.jacklab.1 i586 =Sum: Debug information for package fluidsynth-dssi +Des: This package provides debug information for package fluidsynth-dssi. Debug information is useful when developing applications that use this package or when debugging this package. -Des: ##---------------------------------------- =Pkg: fox 1.6.4 0.jacklab.1 i586 =Sum: The FOX toolkit +Des: FOX is a C++-based library for graphical user interface development FOX supports modern GUI features, such as drag-and-drop, tooltips, tab books, tree lists, icons, multiple document interfaces (MDI), timers, idle processing, automatic GUI updating, as well as OpenGL/Mesa for 3D graphics. Subclassing of basic FOX widgets allows for easy extension beyond the built-in widgets by application writers. -Des: ##---------------------------------------- =Pkg: fox-devel 1.6.4 0.jacklab.1 i586 =Sum: Development files and documentation for the FOX GUI toolkit. +Des: The fox-devel package contains the files necessary to develop applications using the FOX GUI toolkit: the header files, the reswrap resource compiler, manual pages, and HTML documentation. -Des: ##---------------------------------------- =Pkg: freecycle 0.6alpha 0.jacklab.1 i586 =Sum: Freecycle is a beat slicer +Des: Freecycle is a beat slicer providing amplitude domain and frequency domain beat matching and zero crossing algorithms. It exports sliced audio chunks and generates a MIDI file which can be used to play the sliced loop. Alternatively, you can jam with it as soon as you've made slices using a MIDI keyboard or sequencer. Freecycle also exports AKAI S5000/S6000/Z4/Z8 .AKP files to be used with your favorite sampler, SoundFont files, and supports slice drag and drop from the application to the desktop. It can process the audio inline using LADSPA effects, as well as applying envelopes to seperate slices. -Des: ##---------------------------------------- =Pkg: fweelin 0.5.2a 0.jacklab.1 i586 =Sum: A live looping instrument +Des: FreeWheeling is a new way to be In The Muse-ical Moment. It is a live looping instrument that returns us to the joy of making music spontaneously. FreeWheeling allows us to build repetitive grooves by sampling and directing loops from within spirited improvisation. FreeWheeling works because it is built from the perspective of an improviser. It takes us out of mice and menus, and into our own process of making sound. FreeWheeling is open source software, released under the GNU GPL license. I hope that this will help FreeWheeling grow into a robust platform for live looping. Author: JP Mercury -Des: ##---------------------------------------- =Pkg: fxsudoku 0.5.1 0.admine.1 i586 =Sum: The game of sudoku +Des: The popular game of sudoku written using the FOX Toolkit. fxsudoku is an implementation of the Sudoku game. The aim of Sudoku is to enter a numerical digit from 1 through 9 in each cell of a 9×9 grid made up of 3×3 subgrids (called "regions"), starting with various digits given in some cells (the "givens"). Each row, column, and region must contain only one instance of each numeral. Completing the puzzle requires patience and logical ability. -Des: ##---------------------------------------- =Pkg: ghostess 20050916 0.jacklab.1 i586 =Sum: A GUI host for DSSI plugins +Des: This assumes you are familiar with jack-dssi-host. ghostess and jack-dssi-host both descended from the same dssi_example_host source, and in many ways are still very similar. A summary of the differences (as of 2005/4/11): * ghostess is GPL, jack-dssi-host is BSD-ish. * ghostess uses GNU autotools. Use the usual './configure && make && make install' to build. * ghostess has a simple GTK+ GUI. Click on the 'UI' button for any instance to launch or hide its UI. Right-click on the 'UI' button for more options. * ghostess comes with a minimal universal DSSI GUI (installed as /usr/bin/ghostess_universal_gui) that can be used with any DSSI or LADSPA plugin. It does not read RDF files or instantiate the plugin, so it's not as full-featured as a universal GUI could be, but it does allow for adjusting DSSI/LADSPA ports, selecting bank and program (for plugins with select_program()), and sending test notes (for plugins with any of the run_synth() functions). If ghostess cannot find a UI for a plugin, and the universal GUI is in the PATH, ghostess will launch it. * ghostess allows specification of the MIDI channel for each plugin instance, allowing layering of multiple synths per channel. * ghostess allows specification of initial configure, program, and port values from the command line. * ghostess tracks configure items set on startup or sent by plugin UIs. * ghostess, through its 'Save Configuration...' menu option, can save the current configuration of its plugins. Basically, it just writes a Bourne shell script that can be used to start a (mostly) identical session. * ghostess creates a separate MIDI reception thread, and makes it low-priority SCHED_FIFO if possible (ALSA-only, at the moment). * ghostess has a (clumsy but functional) CoreMIDI driver, allowing its use on Mac OS X. * ghostess double-forks its plugin UIs, putting them in separate process groups, and it does not SIGHUP everything on shutdown. jack-dssi-host keeps the UIs in its process group, and SIGHUPs them all as it exits (Linux-only, at the moment). * jack-dssi-host uses dual gettimeofday()s in the MIDI and audio process threads to do event dejittering, which seems expensive. ghostess uses jack_frame_time() and jack_last_frame_time(). This means ghostess needs JACK 0.99.0 or newer. * ghostess uses the LADSPA plugin Label and port Names when creating JACK port names, hopefully resulting in short-but-useful port names. * unlike jack-dssi-host, ghostess will not automatically load a plugin if it is invoked without arguments via a symlink of the same name as the plugin. * ghostess passes the JACK audio input buffers directly to plugins, eliminating a memcpy() that jack-dssi-host does. * jack-dssi-host includes ~/.dssi in its default for DSSI_PATH, ghostess does not. Author: Sean Bolton -Des: ##---------------------------------------- =Pkg: hearnet 0.0.4 0.jacklab.1 i586 =Sum: Hearnet - listen to your network +Des: Hearnet - listen to your network Author: Hans Fugal -Des: ##---------------------------------------- =Pkg: hearnet 0.0.5 0.jacklab.1 i586 =Sum: Hearnet - listen to your network +Des: Hearnet - listen to your network Author: Hans Fugal -Des: ##---------------------------------------- =Pkg: hexter 0.5.8 0.jacklab.3 i586 =Sum: A Yamaha DX7 modeling plugin for DSSI +Des: hexter is a software synthesizer that models the sound generation of a Yamaha DX7 synthesizer. It can easily load most DX7 patch bank files, accept patch editing commands via MIDI sys-ex messages, and recreate the sound of the DX7 with greater accuracy than any previous open-source emulation (that the author is aware of....) hexter operates as a plugin for the Disposable Soft Synth Interface (DSSI) DSSI is a plugin API for software instruments (soft synths) with user interfaces, permitting them to be hosted in-process by Linux audio applications. More information on DSSI can be found at: http://dssi.sourceforge.net/ hexter is written by Sean Bolton, and copyright (c)2004 under the GNU General Public License, version 2 or later. -Des: ##---------------------------------------- =Pkg: hexter 0.5.9 0.jacklab.1 i586 =Sum: A Yamaha DX7 modeling plugin for DSSI +Des: hexter is a software synthesizer that models the sound generation of a Yamaha DX7 synthesizer. It can easily load most DX7 patch bank files, accept patch editing commands via MIDI sys-ex messages, and recreate the sound of the DX7 with greater accuracy than any previous open-source emulation (that the author is aware of....) hexter operates as a plugin for the Disposable Soft Synth Interface (DSSI) DSSI is a plugin API for software instruments (soft synths) with user interfaces, permitting them to be hosted in-process by Linux audio applications. More information on DSSI can be found at: http://dssi.sourceforge.net/ hexter is written by Sean Bolton, and copyright (c)2004 under the GNU General Public License, version 2 or later. -Des: ##---------------------------------------- =Pkg: hydrogen 0.9.3 0.jacklab.2 i586 =Sum: A Real-time Drum Machine/Sequencer +Des: Hydrogen is a simple real-time Drum machine/sequencer for CAC (Computer Aided Composition). It supports OSS and JACK outputs, and ALSA-sequencer MIDI input. Author: Alessandro Cominu -Des: ##---------------------------------------- =Pkg: hydrogen-tools 0.9.3 0.jacklab.2 i586 =Sum: Tools for hydrogen +Des: Some additional tools for hydrogen. * hydrogen2Midi * hydrogenBenchmark Author: Alessandro Cominu -Des: ##---------------------------------------- =Pkg: jaaa 0.1.2 0.jacklab.1 i586 =Sum: JACK and ALSA Audio Analyser +Des: Jaaa (JACK and ALSA Audio Analyser) is an audio signal generator and spectrum analyzer designed to make accurate measurements. Authors: -------- Fons Adriaensen -Des: ##---------------------------------------- =Pkg: jaaa-debuginfo 0.1.2 0.jacklab.1 i586 =Sum: Debug information for package jaaa +Des: This package provides debug information for package jaaa. Debug information is useful when developing applications that use this package or when debugging this package. -Des: ##---------------------------------------- =Pkg: jack 0.100.7 0.jacklab.1 i586 =Sum: Jack Audio Connection Kit +Des: JACK is a low-latency audio server written primarily for the Linux operating system. It can connect a number of different applications to an audio device, as well as allow them to share audio between themselves. Its clients can run in their own processes (as a normal application), or they can run within a JACK server (as a plug-in). Authors: -------- pbd@users.sourceforge.net -Des: ##---------------------------------------- =Pkg: jack 0.101.1 0.jacklab.1 i586 =Sum: Jack Audio Connection Kit +Des: JACK is a low-latency audio server written primarily for the Linux operating system. It can connect a number of different applications to an audio device, as well as allow them to share audio between themselves. Its clients can run in their own processes (as a normal application), or they can run within a JACK server (as a plug-in). Authors: -------- pbd@users.sourceforge.net -Des: ##---------------------------------------- =Pkg: jack-ctl 20041214 0.jacklab.1 i586 =Sum: A Jack session management script +Des: A Jack session management script. Author: Rohan Drape -Des: ##---------------------------------------- =Pkg: jack-debuginfo 0.100.7 0.jacklab.1 i586 =Sum: Debug information for package jack +Des: This package provides debug information for package jack. Debug information is useful when developing applications that use this package or when debugging this package. -Des: ##---------------------------------------- =Pkg: jack-debuginfo 0.101.1 0.jacklab.1 i586 =Sum: Debug information for package jack +Des: This package provides debug information for package jack. Debug information is useful when developing applications that use this package or when debugging this package. -Des: ##---------------------------------------- =Pkg: jack-devel 0.100.7 0.jacklab.1 i586 =Sum: Development package for jack +Des: This package contains the files needed to compile programs that communicates jack clients/servers. Authors: -------- pbd@sourceforge.net -Des: ##---------------------------------------- =Pkg: jack-devel 0.101.1 0.jacklab.1 i586 =Sum: Development package for jack +Des: This package contains the files needed to compile programs that communicates jack clients/servers. Authors: -------- pbd@sourceforge.net -Des: ##---------------------------------------- =Pkg: jack-osc 20041214 0.jacklab.1 i586 =Sum: A JACK OSC Monitor and Controller Daemon +Des: A JACK OSC Monitor and Controller Daemon. Author: Rohan Drape -Des: ##---------------------------------------- =Pkg: jack-play 20041214 0.jacklab.1 i586 =Sum: A Jack sound file player +Des: A Jack sound file player. Author: Rohan Drape -Des: ##---------------------------------------- =Pkg: jack-plumbing 20041214 0.jacklab.1 i586 =Sum: A Jack connection daemon +Des: A Jack connection daemon. Author: Rohan Drape -Des: ##---------------------------------------- =Pkg: jack-rack 1.4.4 0.jacklab.1 i586 =Sum: LADSPA Effects Rack for JACK +Des: JACK Rack is a stereo LADSPA effects rack for the JACK audio API. You can insert LADSPA effects through JACK Rack. It uses GTK+ 2 for the GUI. Author: Bob Ham -Des: ##---------------------------------------- =Pkg: jack-rack 1.4.5rc1 0.jacklab.1 i586 =Sum: LADSPA Effects Rack for JACK +Des: JACK Rack is a stereo LADSPA effects rack for the JACK audio API. You can insert LADSPA effects through JACK Rack. It uses GTK+ 2 for the GUI. Author: Bob Ham -Des: ##---------------------------------------- =Pkg: jack-record 20041214 0.jacklab.1 i586 =Sum: A Jack capture client +Des: A Jack capture client. Author: Rohan Drape -Des: ##---------------------------------------- =Pkg: jack-scope 20041214 0.jacklab.1 i586 =Sum: A Jack oscilloscope +Des: A Jack oscilloscope. Author: Rohan Drape -Des: ##---------------------------------------- =Pkg: jack-udp 20041214 0.jacklab.1 i586 =Sum: A Jack UDP audio transport client +Des: A Jack UDP audio transport client. Author: Rohan Drape -Des: ##---------------------------------------- =Pkg: jack_fst 1.2 0.jacklab.1 i586 =Sum: A small program to load win32/x86 VST plugins +Des: A small program to load win32/x86 VST plugins. 'VST is a trademark of Steinberg Media Technologies GmbH' - VST PlugIn Technology by Steinberg Media Technologies GmbH, - VST PlugIn Interface Technology by Steinberg Media Technologies GmbH -Des: ##---------------------------------------- =Pkg: jack_snapshot 0.0.2 0.jacklab.1 i586 =Sum: A terminal based utility for storing/restoring jack connection states +Des: jack_snapshot - a little tool for storing/restoring jack connection states. It does this by writing/reading the names of the connected ports into/from a simple textfile. and here is also one weakness: some jack clients don't use the same jack name on each run, but dynamically assign one (like meterbridge) but most of them can be told to use a specific name, so this isn't really a problem. at least not for me. Some pattern matching might be added in the future.. Author: Florian Schmidt -Des: ##---------------------------------------- =Pkg: jack_snapshot 0.0.3 0.jacklab.1 i586 =Sum: A terminal based utility for storing/restoring jack connection states +Des: jack_snapshot - a little tool for storing/restoring jack connection states. It does this by writing/reading the names of the connected ports into/from a simple textfile. and here is also one weakness: some jack clients don't use the same jack name on each run, but dynamically assign one (like meterbridge) but most of them can be told to use a specific name, so this isn't really a problem. at least not for me. Some pattern matching might be added in the future.. Author: Florian Schmidt -Des: ##---------------------------------------- =Pkg: jackbeat 0.5.4 0.jacklab.1 i586 =Sum: Jackbeat is an audio sequencer +Des: Jackbeat is an audio sequencer, a Linux tool for musicians and sound artists: * drummachine-like interface for fast and easy editing * realtime operation : while playing, the sequence can be edited and resized, the bpm rate modified, and new samples loaded, * virtually unlimited number of tracks and beats * easy to use and yet powerful : just JACK it into jack-rack and you can apply LADSPA effect plugins on a per track basis, perform mastering with jackeq, etc... * loads and saves .jab files, Jackbeat's file format, based on xml and packed with tar. Author: Olivier Guilyardi -Des: ##---------------------------------------- =Pkg: jackmeter 0.3 0.jacklab.1 i586 =Sum: A basic console based DPM (Digital Peak Meter) for JACK +Des: Jack Meter is a basic console based DPM (Digital Peak Meter) for JACK. I wrote it for quickly checking remote signal levels, without having to run X11 to use a pretty graphical meter such as meterbridge. AUTHOR: Nicholas J Humfrey -Des: ##---------------------------------------- =Pkg: jackminimix 0.1 0.jacklab.1 i586 =Sum: A simple mixer for the Jack Audio Connection Kit +Des: JackMiniMix is a simple mixer for the Jack Audio Connection Kit with an OSC based control interface. It supports a user configurable number of stereo inputs, which can then be queried and controlled by sending it OSC messages. AUTHORS: Nicholas J Humfrey -Des: ##---------------------------------------- =Pkg: jackmix 0.0.3 0.jacklab.1 i586 =Sum: A mixer application for jack +Des: Ever struggled with a number of jack applications on your desktop everyone using its own master volume-fader but not one common place for all the volumes directly accessible? The solution to your problem is JackMix, a mixer app for jack that looks exactly like the mixer you would use if you had to connect your analog equipment. Author: Arnold Krille -Des: ##---------------------------------------- =Pkg: jackmix 0.1.0r1 0.jacklab.1 i586 =Sum: A mixer application for jack +Des: Ever struggled with a number of jack applications on your desktop everyone using its own master volume-fader but not one common place for all the volumes directly accessible? The solution to your problem is JackMix, a mixer app for jack that looks exactly like the mixer you would use if you had to connect your analog equipment. Author: Arnold Krille -Des: ##---------------------------------------- =Pkg: kluppe 0.6.3 0.jacklab.1 i586 =Sum: A live looping instrument +Des: kluppe is a loop-player and recorder, designed for live use. kluppe is open source (see LICENSE.txt) kluppe is the austrian word for clip or peg and sounds even crazier if you loop it. For details about the word kluppe see http://lists.debian.org/debian-devel/2004/05/msg00182.html ;-) Author: Dieter Kovacic -Des: ##---------------------------------------- =Pkg: kluppe 0.6.4 0.jacklab.1 i586 =Sum: A live looping instrument +Des: kluppe is a loop-player and recorder, designed for live use. kluppe is open source (see LICENSE.txt) kluppe is the austrian word for clip or peg and sounds even crazier if you loop it. For details about the word kluppe see http://lists.debian.org/debian-devel/2004/05/msg00182.html ;-) Author: Dieter Kovacic -Des: ##---------------------------------------- =Pkg: kluppe 0.6.5 0.jacklab.1 i586 =Sum: A live looping instrument +Des: kluppe is a loop-player and recorder, designed for live use. kluppe is open source (see LICENSE.txt) kluppe is the austrian word for clip or peg and sounds even crazier if you loop it. For details about the word kluppe see http://lists.debian.org/debian-devel/2004/05/msg00182.html ;-) Author: Dieter Kovacic -Des: ##---------------------------------------- =Pkg: ladspa 1.12.20050819 0.jacklab.1 i586 =Sum: The Linux Audio Developer's Simple Plug-in API +Des: The Linux Audio Developer's Simple Plug-in API (LADSPA) provides the ability to write simple plug-in audio processors in C/C++ and link them dynamically. The package contains the LADSPA SDK and the following plugins: * ladspa-sdk-1.12 * alienwah-1.13 * blepvco-0.1.0 * Blop-0.2.8 * caps-0.2.3 * clipper * cmt-1.15 * FIL-plugins-0.0.1 * match * MCP-plugins-0.3.0 * njl-plugins-0.2.1 * preamp * pvoc-0.1.10 * REV-plugins-0.3.1 * swh-plugins-0.4.13 * super-60 * TAP-plugins-0.7.0 * unmatched * vcf-0.0.5 * VCO-plugins-0.3.0 * vlevel-0.5 * vocoder-0.3 Authors: -------- Richard Furse Jezar at Dreampoint Steve Harris -Des: ##---------------------------------------- =Pkg: lash 0.5.1 1.jacklab.1 i586 =Sum: LASH Audio Session Handler ##---------------------------------------- =Pkg: lash-devel 0.5.1 1.jacklab.1 i586 =Sum: Development package for LASH +Des: This package contains the files needed to compile programs that use the LASH system. Original Authors: Bob Ham Maintainer (as of Lash 0.5.0): Dave Robillard -Des: ##---------------------------------------- =Pkg: lash-libs 0.5.1 1.jacklab.1 i586 =Sum: Shared libraries for LASH system +Des: This package contains the shared libraries for LASH system. Original Authors: Bob Ham Maintainer (as of Lash 0.5.0): Dave Robillard -Des: ##---------------------------------------- =Pkg: ldrum 0.6.0 0.jacklab.1 i586 =Sum: LDRUM is an open-source drummachine +Des: The LDRUM is an open-source drummachine that offers ten channels, realtime control, a simple pattern sequencer and a graphical user-interface. It currently runs under Linux only, it is developed in C++ and uses JACK, ALSA, Qt and LADSPA (it's a JAQL app;) Author: Peter Eschler -Des: ##---------------------------------------- =Pkg: lemux 0.2 0.jacklab.1 i586 =Sum: Lemux - LADSPA instrument plugins based on openMSX devices +Des: lemux - LADSPA instrument plugins based on openMSX devices. Currently the following plugins are provided: 2061: CV to Frequency converter Plugin Name: "CV to Frequency converter" Plugin Label: "CVFreq" Plugin Unique ID: 2061 A simple plugin that is useful when using the others in a modular synth that uses Frequency in Control Voltage (1V/Octave) instead of Frequency in Hz. In particular, the author uses it in alsamodular. 2062: SCC Channel ================= Plugin Name: "SCC channel" Plugin Label: "SCC" Plugin Unique ID: 2062 This emulates one channel of Konami's SCC chip, which works with 8 bit, 32 byte samples. A large collection of "preset" samples are provided, with many thanks to Patriek Lesparre & Maarten ter Huurne who provided me with readily dumped samples and valuable hints on how to obtain more samples. More info about this chip: http://www.msxnet.org/tech/scc 2063: PSG Channel ================= Plugin Name: "PSG channel" Plugin Label: "PSG" Plugin Unique ID: 2063 This emulates one channel of the AY-3-8910, better known as the PSG, the standard soundchip in the MSX1(and higher). It uses simple square waves and optional noise by turning the audio on/off. It also features Amplitude modulation with 16 steps, and the shape is also configurable. More info about this chip: http://www.howell1964.freeserve.co.uk/parts/ay3891x_datasheet.htm 2064: MUSIC Channel =================== Plugin Name: "MUSIC channel" Plugin Label: "MUSIC" Plugin Unique ID: 2064 This emulates a channel of the YM2413 2-operator FM sound generator type OPLL. More info about this chip: http://www.smspower.org/maxim/forumstuff/ym2413am/ 2065: MUSIC Drum instruments ============================ Plugin Name: "MUSIC Drum instruments" Plugin Label: "MUSICDrum" Plugin Unique ID: 2065 This emulates the buildin drum sounds of the YM2413 2-operator FM sound generator type OPLL. More info about this chip: http://www.smspower.org/maxim/forumstuff/ym2413am/ 2066: SID Chip ============== Plugin Name: "SID chip" Plugin Label: "SID" Plugin Unique ID: 2066 This emulates the famous C64 audio chip SID aka MOS6581 (and MOS8580). The emulation uses the "resid" engine from sidplay2. Author: Joost Yervante Damad -Des: ##---------------------------------------- =Pkg: libfst 1.7 2.jacklab.1 i586 =Sum: A library that permits Linux applications to load win32/x86 VST plugins +Des: libfst is a small C library that permits native Linux applications to load win32/x86 VST plugins. It uses libwine to make this possible, but doesn't require that the host application be a "wine application". In case you wonder, "fst" stands for FreeST. Imagine saying "VST" with an odd lisp. To build the library from source, you will need the Steinberg SDK header files AEffect.h and aeffectx.h. These cannot be redistributed by us or anyone else. The configure script will tell you where to get them. 'VST is a trademark of Steinberg Media Technologies GmbH' - VST PlugIn Technology by Steinberg Media Technologies GmbH, - VST PlugIn Interface Technology by Steinberg Media Technologies GmbH -Des: ##---------------------------------------- =Pkg: libfst 1.8 0.jacklab.1 i586 =Sum: A library that permits Linux applications to load win32/x86 VST plugins +Des: libfst is a small C library that permits native Linux applications to load win32/x86 VST plugins. It uses libwine to make this possible, but doesn't require that the host application be a "wine application". In case you wonder, "fst" stands for FreeST. Imagine saying "VST" with an odd lisp. To build the library from source, you will need the Steinberg SDK header files AEffect.h and aeffectx.h. These cannot be redistributed by us or anyone else. The configure script will tell you where to get them. 'VST is a trademark of Steinberg Media Technologies GmbH' - VST PlugIn Technology by Steinberg Media Technologies GmbH, - VST PlugIn Interface Technology by Steinberg Media Technologies GmbH -Des: ##---------------------------------------- =Pkg: libfst-devel 1.7 2.jacklab.1 i586 =Sum: Developfiles for libfst +Des: This package contains header files, libraries and documentation for writing and compiling programs using libfst. 'VST is a trademark of Steinberg Media Technologies GmbH' - VST PlugIn Technology by Steinberg Media Technologies GmbH, - VST PlugIn Interface Technology by Steinberg Media Technologies GmbH -Des: ##---------------------------------------- =Pkg: libfst-devel 1.8 0.jacklab.1 i586 =Sum: Developfiles for libfst +Des: This package contains header files, libraries and documentation for writing and compiling programs using libfst. 'VST is a trademark of Steinberg Media Technologies GmbH' - VST PlugIn Technology by Steinberg Media Technologies GmbH, - VST PlugIn Interface Technology by Steinberg Media Technologies GmbH -Des: ##---------------------------------------- =Pkg: libgig 3.0.0 0.jacklab.1 i586 =Sum: C++ library for loading Gigasampler files and DLS Level 1/2 files +Des: C++ library for loading Gigasampler files and DLS Level 1/2 files. -Des: ##---------------------------------------- =Pkg: libgig 3.0.0 0.jacklab.cvs20060602 i586 =Sum: C++ library for loading Gigasampler files and DLS Level 1/2 files +Des: C++ library for loading Gigasampler files and DLS Level 1/2 files. -Des: ##---------------------------------------- =Pkg: libgig-devel 3.0.0 0.jacklab.1 i586 =Sum: C++ library for loading Gigasampler files and DLS Level 1/2 files +Des: C++ library for loading Gigasampler files and DLS Level 1/2 files. -Des: ##---------------------------------------- =Pkg: libgig-devel 3.0.0 0.jacklab.cvs20060602 i586 =Sum: C++ library for loading Gigasampler files and DLS Level 1/2 files +Des: C++ library for loading Gigasampler files and DLS Level 1/2 files. -Des: ##---------------------------------------- =Pkg: libinstpatch 1.0.0pre1 0.jacklab.1 i586 =Sum: A library for processing digital sample based MIDI instrument "patch" files +Des: libInstPatch stands for lib-Instrument-Patch and is a library for processing digital sample based MIDI instrument "patch" files. The types of files libInstPatch supports are used for creating instrument sounds for wavetable synthesis. libInstPatch provides an object framework (based on GObject) to load patch files into, which can then be edited, converted, and saved. Authors: Josh Green -Des: ##---------------------------------------- =Pkg: libinstpatch-devel 1.0.0pre1 0.jacklab.1 i586 =Sum: Include Files and Libraries mandatory for Development +Des: This package contains all necessary include files and libraries needed to develop applications that require these. Authors: Josh Green -Des: ##---------------------------------------- =Pkg: libjackasyn 0.12 0.jacklab.1 i586 =Sum: A wrapper library for JACK system +Des: Libjackasyn is a library that allows you to use any sound program on linux for the OSS system to run as a JACK client. Authors: -------- Guenter Geiger -Des: ##---------------------------------------- =Pkg: libjackasyn-debuginfo 0.12 0.jacklab.1 i586 =Sum: Debug information for package libjackasyn +Des: This package provides debug information for package libjackasyn. Debug information is useful when developing applications that use this package or when debugging this package. -Des: ##---------------------------------------- =Pkg: liblo 0.22 0.jacklab.1 i586 =Sum: Lightweight OSC Implementation +Des: This is a lightweight, easy to use implementation of the OSC protocol (see http://www.cnmat.berkeley.edu/OpenSoundControl/ for details). Authors: -------- Steve Harris -Des: ##---------------------------------------- =Pkg: liblo 0.23 0.jacklab.1 i586 =Sum: Lightweight OSC Implementation +Des: This is a lightweight, easy to use implementation of the OSC protocol (see http://www.cnmat.berkeley.edu/OpenSoundControl/ for details). Authors: -------- Steve Harris -Des: ##---------------------------------------- =Pkg: liblo-devel 0.22 0.jacklab.1 i586 =Sum: Include Files and Libraries mandatory for Development. +Des: This package contains all necessary include files and libraries needed to develop applications that require these. Authors: -------- Steve Harris -Des: ##---------------------------------------- =Pkg: liblo-devel 0.23 0.jacklab.1 i586 =Sum: Include Files and Libraries mandatory for Development. +Des: This package contains all necessary include files and libraries needed to develop applications that require these. Authors: -------- Steve Harris -Des: ##---------------------------------------- =Pkg: liblscp 0.3.3 0.jacklab.1 i586 =Sum: LinuxSampler control protocol API +Des: LinuxSampler control protocol API. Author: Rui Nuno Capela -Des: ##---------------------------------------- =Pkg: liblscp-devel 0.3.3 0.jacklab.1 i586 =Sum: LinuxSampler control protocol API libraries and include files +Des: LinuxSampler control protocol API libraries and include files. Author: Rui Nuno Capela -Des: ##---------------------------------------- =Pkg: linuxsampler 0.3.3 0.jacklab.cvs20060602 i586 =Sum: LinuxSampler - modular, streaming capable sampler +Des: LinuxSampler is a work in progress. The goal is to produce a free, open source pure software audio sampler with professional grade features, comparable to both hardware and commercial Windows/Mac software samplers and to introduce new features not yet available by any other sampler in the world. LinuxSampler was designed as a sampler backend, decoupled from any user interface. It provides a network interface using an ASCII based protocol called LSCP for full control of the sampler like for setup and altering sampler sessions. But don't be afraid, with QSampler we already have a convenient GUI frontend (based on the cross-platform GUI library Qt) for LinuxSampler and due to the decoupled design you can even control the sampler with the GUI frontend from another computer, probably even running another OS like Windows or OSX. Beside our own custom network control layer we planned to add existing ones as well (e.g. OSC). With the planned SMP and cluster support LinuxSampler might become a standard for high-end studios and concerts. It is planned to support all common sampler formats in LinuxSampler, but at the moment we chose to concentrate on the Gigasampler format, because we think it's currently the best sampler format in regards of quality and power, especially for the synthesis of natural instruments like pianos, brass and bowed instruments. But we already made good advance in implementing this format, so we are optimistic to start with adding other formats soon. Beside that we also planned to design our own, sophisticated sampler format to introduce a more powerful and more flexible sampler format compared to any sampler format currently available in the world. Be encouraged to share your ideas about such a new format with us! Authors: -------- Benno Senoner Christian Schoenebeck Vladimir Senkov You are NOT ALLOWED to use LinuxSampler source code, libraries or applications in COMMERCIAL hardware or software products without prior written authorization by the authors. see README -Des: ##---------------------------------------- =Pkg: linuxsampler 0.3.3 0.jacklab.cvs20060626 i586 =Sum: LinuxSampler - modular, streaming capable sampler +Des: LinuxSampler is a work in progress. The goal is to produce a free, open source pure software audio sampler with professional grade features, comparable to both hardware and commercial Windows/Mac software samplers and to introduce new features not yet available by any other sampler in the world. LinuxSampler was designed as a sampler backend, decoupled from any user interface. It provides a network interface using an ASCII based protocol called LSCP for full control of the sampler like for setup and altering sampler sessions. But don't be afraid, with QSampler we already have a convenient GUI frontend (based on the cross-platform GUI library Qt) for LinuxSampler and due to the decoupled design you can even control the sampler with the GUI frontend from another computer, probably even running another OS like Windows or OSX. Beside our own custom network control layer we planned to add existing ones as well (e.g. OSC). With the planned SMP and cluster support LinuxSampler might become a standard for high-end studios and concerts. It is planned to support all common sampler formats in LinuxSampler, but at the moment we chose to concentrate on the Gigasampler format, because we think it's currently the best sampler format in regards of quality and power, especially for the synthesis of natural instruments like pianos, brass and bowed instruments. But we already made good advance in implementing this format, so we are optimistic to start with adding other formats soon. Beside that we also planned to design our own, sophisticated sampler format to introduce a more powerful and more flexible sampler format compared to any sampler format currently available in the world. Be encouraged to share your ideas about such a new format with us! Authors: -------- Benno Senoner Christian Schoenebeck Vladimir Senkov You are NOT ALLOWED to use LinuxSampler source code, libraries or applications in COMMERCIAL hardware or software products without prior written authorization by the authors. see README -Des: ##---------------------------------------- =Pkg: linuxsampler-devel 0.3.3 0.jacklab.cvs20060602 i586 =Sum: Linuxsampler development files +Des: Linuxsampler development files for allowing 3rd party applications to link against liblinuxsampler -Des: ##---------------------------------------- =Pkg: linuxsampler-devel 0.3.3 0.jacklab.cvs20060626 i586 =Sum: Linuxsampler development files +Des: Linuxsampler development files for allowing 3rd party applications to link against liblinuxsampler -Des: ##---------------------------------------- =Pkg: louderbox 0.2.0 0.jacklab.cvs20060131 i586 =Sum: Louderbox - a broadcast audio processor +Des: Louderbox is a complete 8 band audio processor intended to be used with software stereo and R[B]DS generators (but perfectly usable for other things (such as web "radio") using the jack audio connection kit under Linux. Author: Dan Mills -Des: ##---------------------------------------- =Pkg: madjack 0.4 0.jacklab.1 i586 =Sum: A MPEG Audio Deck for the Jack Audio Connection Kit +Des: MadJACK is a MPEG Audio Deck for the Jack Audio Connection Kit with an OSC based control interface. It was written as a backend for DJ music playback and is released under the GPL licence. AUTHORS: Nicholas J Humfrey -Des: ##---------------------------------------- =Pkg: mhwaveedit 1.4.7 0.jacklab.1 i586 =Sum: A graphical program for editing sound files +Des: mhWaveEdit is a graphical program for editing sound files written by Magnus Hjorth. It is completely free (GPL) and intended to be user-friendly and robust. It does not require a fast computer. Features * Loads, plays, records and saves wav-files. If you have libsndfile, all the formats that it supports will be supported as well. * Ogg and MP3 import/export through OggDec/OggEnc and Lame (if available). A variety of other formats can be imported through mplayer. * If the file is small, it's loaded into memory. Otherwise, it's edited on disc. * Select regions, cut, copy and paste. * Zooming * Remember/jump to position * Volume and speed adjustment * Convert between sample rates, sample sizes, stereo and mono * You can always undo, all the way back to the original state of the file (even when editing large files.) * It never changes your files behind your back. Author: Magnus Hjorth -Des: ##---------------------------------------- =Pkg: mhwaveedit 1.4.8 0.jacklab.1 i586 =Sum: A graphical program for editing sound files +Des: mhWaveEdit is a graphical program for editing sound files written by Magnus Hjorth. It is completely free (GPL) and intended to be user-friendly and robust. It does not require a fast computer. Features * Loads, plays, records and saves wav-files. If you have libsndfile, all the formats that it supports will be supported as well. * Ogg and MP3 import/export through OggDec/OggEnc and Lame (if available). A variety of other formats can be imported through mplayer. * If the file is small, it's loaded into memory. Otherwise, it's edited on disc. * Select regions, cut, copy and paste. * Zooming * Remember/jump to position * Volume and speed adjustment * Convert between sample rates, sample sizes, stereo and mono * You can always undo, all the way back to the original state of the file (even when editing large files.) * It never changes your files behind your back. Author: Magnus Hjorth -Des: ##---------------------------------------- =Pkg: midingsolo 0.1.2 0.jacklab.1 i586 =Sum: A Wave to MIDI software for real-time monophonic signals +Des: This project aims to do a real-time audio note recognition software for monophonic signals (like solos). The input must be a monophonic wave signal (only one voice, with one melodic instrument). The result are MIDI events launched trough the ALSA sequencer. (recognized notes are printed to the standard output too) Author: Gilles Degottex -Des: ##---------------------------------------- =Pkg: midingsolo 0.1.3 0.jacklab.1 i586 =Sum: A Wave to MIDI software for real-time monophonic signals +Des: This project aims to do a real-time audio note recognition software for monophonic signals (like solos). The input must be a monophonic wave signal (only one voice, with one melodic instrument). The result are MIDI events launched trough the ALSA sequencer. (recognized notes are printed to the standard output too) Author: Gilles Degottex -Des: ##---------------------------------------- =Pkg: muse 0.8 0.jacklab.1 i586 =Sum: Midi Music Editor +Des: MusE is a MIDI sequencer with recording and editing capabilities. It is full multi-threaded with Qt3 GUI. Authors: -------- Werner Schweer -Des: ##---------------------------------------- =Pkg: muse 0.8.1a 0.jacklab.1 i586 =Sum: Midi Music Editor +Des: MusE is a MIDI sequencer with recording and editing capabilities. It is full multi-threaded with Qt3 GUI. Authors: -------- Werner Schweer -Des: ##---------------------------------------- =Pkg: netjack 0.11 0.jacklab.1 i586 =Sum: Realtime Audio Transport +Des: Netjack is a Realtime Audio Transport over a generic IP Network. It is fully integrated into JACK. When you transport Audio Signals over a Network, you will always have the problem, that two Computers are bound to two different Sample Clocks. The other Network Transports face the Problem of compensating for the drift between these Sample Clocks. This is very hard to do. NetJack works around this problem, by syncing all Clients to one Soundcard. So there will be no resampling or glitches in the whole network. As long as there is no packet loss. Packet loss can not be compensated. AUTHORS(s): Torben Hohn Dan Mills Robert Jonsson -Des: ##---------------------------------------- =Pkg: netjack 0.12rc1 0.jacklab.1 i586 =Sum: Realtime Audio Transport +Des: Netjack is a Realtime Audio Transport over a generic IP Network. It is fully integrated into JACK. When you transport Audio Signals over a Network, you will always have the problem, that two Computers are bound to two different Sample Clocks. The other Network Transports face the Problem of compensating for the drift between these Sample Clocks. This is very hard to do. NetJack works around this problem, by syncing all Clients to one Soundcard. So there will be no resampling or glitches in the whole network. As long as there is no packet loss. Packet loss can not be compensated. AUTHORS(s): Torben Hohn Dan Mills Robert Jonsson -Des: ##---------------------------------------- =Pkg: oddcastv3 3.0.3 0.jacklab.2 i586 =Sum: An Icecast/Shoutcast streamer +Des: This version of oddcastv3 allows you to hook into any jack output port and broadcast the audio to an icecast or shoutcast server. This version of oddcastv3 is all command-line oriented, and comes with example config files for each of the encoding types supported (Ogg Vorbis, LAME, AAC). You will most likely need to take one of the example configs (in the conf dir) and modify it to suit your needs. Author: -Des: ##---------------------------------------- =Pkg: oddcastv3 3.1.6 0.jacklab.1 i586 =Sum: An Icecast/Shoutcast streamer +Des: This version of oddcastv3 allows you to hook into any jack output port and broadcast the audio to an icecast or shoutcast server. This version of oddcastv3 is all command-line oriented, and comes with example config files for each of the encoding types supported (Ogg Vorbis, LAME, AAC). You will most likely need to take one of the example configs (in the conf dir) and modify it to suit your needs. Author: -Des: ##---------------------------------------- =Pkg: osw 1.2.7 0.jacklab.1 i586 =Sum: An extensible graphical signal processing environment +Des: Open Sound World, or OSW, is a scalable, extensible programming environment that allows musicians, sound designers and researchers to process sound in response to expressive real-time control. OSW combines a familiar visual patching paradigm with solid programming-language features such as a strong type system and hierarchical name spaces. OSW also includes an intuitive model for specifying new components using a graphical interface and high-level C++ expressions, making it easy to develop and share new music and signal-processing algoritms. Author: Amar Chaudhary -Des: ##---------------------------------------- =Pkg: pathfinder 1.0.0 0.jacklab.1 i586 =Sum: PathFinder File Browser +Des: PathFinder is a file browser application written using the FOX Toolkit. -Des: ##---------------------------------------- =Pkg: portaudio18 18.1 0.jacklab.1 i586 =Sum: Portable Real-Time Audio Library +Des: PortAudio is a portable audio I/O library designed for cross-platform support of audio. It uses a callback mechanism to request audio processing. Audio can be generated in various formats, including 32 bit floating point, and will be converted to the native format internally. This package renames portaudio.so* to portaudio18.so* So both versions, the actual portaudio-v19 and v18 can coexist. Authors: -------- Phil Burk Ross Bencina -Des: ##---------------------------------------- =Pkg: portaudio18-devel 18.1 0.jacklab.1 i586 =Sum: Development package for the portaudio library +Des: This package contains the files needed to compile programs that use the portaudio library. This package renames portaudio.a to portaudio18.a. So both versions, the actual portaudio-v19 and v18 can coexist. The include portaudio.h was renamed to portaudio18.h. -Des: ##---------------------------------------- =Pkg: portmidi 20041117 0.jacklab.1 i586 =Sum: PortMidi -- real-time MIDI input/output +Des: PortMidi -- real-time MIDI input/output. Some test applications are included. See /usr/share/doc/packages/portmidi. Author: Roger Dannenberg -Des: ##---------------------------------------- =Pkg: psindustrializer 0.2.4 0.jacklab.1 i586 =Sum: Percussion Sample Generator (Discrete Mass Physical Modelling) +Des: Percussion Sample Generator (Discrete Mass Physical Modelling) Industrializer is a program for generating percussion sounds for musical purposes. Try using the sounds in your favorite tracker, or the upcoming Beast / BSE tracker and modular synthesizer. This program is great for generating new techno sounds, industrial sounds in particular. But it is not limited to industrial crashes, it can produce chimes, bubbles, gongs, hammer hits on different materials, and a variety of other sounds. Author: David A. Bartold -Des: ##---------------------------------------- =Pkg: psindustrializer 0.2.5 0.jacklab.1 i586 =Sum: Percussion Sample Generator (Discrete Mass Physical Modelling) +Des: Percussion Sample Generator (Discrete Mass Physical Modelling) Industrializer is a program for generating percussion sounds for musical purposes. Try using the sounds in your favorite tracker, or the upcoming Beast / BSE tracker and modular synthesizer. This program is great for generating new techno sounds, industrial sounds in particular. But it is not limited to industrial crashes, it can produce chimes, bubbles, gongs, hammer hits on different materials, and a variety of other sounds. Author: David A. Bartold -Des: ##---------------------------------------- =Pkg: python-libinstpatch 1.0.0pre1 0.jacklab.1 i586 =Sum: Python bindings to the libinstpatch +Des: Python bindings to the libinstpatch. Authors: Josh Green -Des: ##---------------------------------------- =Pkg: qjackctl 0.2.19a 0.jacklab.1 i586 =Sum: Qt-based interface to JACK +Des: Qjackctl is a simple Qt application to control the JACK sound server daemon (http://jackit.sourceforge.net), for the Linux Audio Desktop infrastructure. Author: Rui Nuno Capela -Des: ##---------------------------------------- =Pkg: qjackctl 0.2.20 0.jacklab.1 i586 =Sum: Qt-based interface to JACK +Des: Qjackctl is a simple Qt application to control the JACK sound server daemon (http://jackit.sourceforge.net), for the Linux Audio Desktop infrastructure. Author: Rui Nuno Capela -Des: ##---------------------------------------- =Pkg: qjacktuner 0.0.1 0.jacklab.cvs20050428 i586 =Sum: An Instrument Tuner for the JACK Audio Connection Kit +Des: An Instrument Tuner for the JACK Audio Connection Kit Author: Karsten Wiese -Des: ##---------------------------------------- =Pkg: qsampler 0.1.3 0.jacklab.1 i586 =Sum: A LinuxSampler Qt GUI Interface +Des: QSampler is a LinuxSampler GUI front-end application written in C++ around the Qt3 toolkit using Qt Designer. At the moment it just wraps as a client reference interface for the LinuxSampler Control Protocol (LSCP). LinuxSampler is a work in progress. The goal is to produce a free, open source pure software audio sampler with professional grade features, comparable to both hardware and commercial Windows/Mac software samplers. The initial platform will be Linux because it is one of the most promising open source multimedia operating systems. Thanks to various kernel patches and the Jack Audio Connection Kit, Linux is currently able to deliver rock solid sub-5 millisecond MIDI-to-Audio response. Author: Rui Nuno Capela -Des: ##---------------------------------------- =Pkg: qsynth 0.2.4 0.jacklab.1 i586 =Sum: QSynth - Qt GUI Interface for FluidSynth +Des: QSynth is a fluidsynth GUI front-end application written in C++ around the Qt3 toolkit using Qt Designer. Eventually it may evolve into a softsynth management application allowing the user to control and manage a variety of command line softsynth but for the moment it wraps the excellent FluidSynth. FluidSynth is a command line software synthesiser based on the Soundfont specification. Author: Rui Nuno Capela -Des: ##---------------------------------------- =Pkg: qsynth 0.2.5 0.jacklab.1 i586 =Sum: QSynth - Qt GUI Interface for FluidSynth +Des: QSynth is a fluidsynth GUI front-end application written in C++ around the Qt3 toolkit using Qt Designer. Eventually it may evolve into a softsynth management application allowing the user to control and manage a variety of command line softsynth but for the moment it wraps the excellent FluidSynth. FluidSynth is a command line software synthesiser based on the Soundfont specification. Author: Rui Nuno Capela -Des: ##---------------------------------------- =Pkg: rezound 0.12.2beta 0.jacklab.1 i586 =Sum: ReZound is a sound file editor and recorder +Des: ReZound aims to be a stable, open source, and graphical audio file editor primarily for but not limited to the Linux operating system. -Des: ##---------------------------------------- =Pkg: sauditor 0.3 0.jacklab.2 i586 =Sum: Sauditor is a simple sample auditor +Des: Sauditor is a sample auditor. It uses jack. It shows a spectrum analyser. It uses a curses interface and X. Author: James Shuttleworth -Des: ##---------------------------------------- =Pkg: seq24 0.7.0 0.jacklab.1 i586 =Sum: A Small, Real-Time MIDI Sequencer +Des: Seq24 is a real-time midi sequencer. It was created to provide a very simple interface for editing and playing MIDI 'loops'. Authors: Rob C. Buse -Des: ##---------------------------------------- =Pkg: shutterbug 2.0.0 0.jacklab.1 i586 =Sum: Shutterbug Screenshot Utility +Des: Shutterbug is a FOX-based screenshot utility. -Des: ##---------------------------------------- =Pkg: silentjack 0.2 0.jacklab.1 i586 =Sum: A silence/dead air detector for the Jack Audio Connection Kit +Des: SilentJack runs COMMAND after silence has been detected for the given number of seconds. SilentJack then waits for the command the finish, and then wait for the grace period before detecting silence again. SilentJack's input port must be connected to an output port before it will start reporting silence. AUTHORS: Nicholas J Humfrey -Des: ##---------------------------------------- =Pkg: soundtank 1.0.2 0.jacklab.1 i586 =Sum: Soundtank hosts LADSPA plugins in "realtime objects" +Des: Soundtank hosts LADSPA plugins in "realtime objects" which embody the structure of the audio signal flow. RTObjects can be controlled in a completely customizeable fashion using MIDI events sent through the ALSA sequencer interface. Soundtank outputs audio through ALSA or JACK. Inside Soundtank, objects are organized in Signal Paths, which are ordered lists of other objects. The order of objects in a Signal Path is the order in which they are processed. A signal path in soundtank is similar to a directory in the Unix filesystem. Channels in the path carry the audio signal between its member objects. Soundtank is similar to the Unix shell, it gives you a command-line where you enter commands. Most Unix shell commands have an equivalent in Soundtank. If you know the Unix shell, then you already have a good idea about how to use Soundtank. Author: Jacob Robbins -Des: ##---------------------------------------- =Pkg: soundtouch 1.3.1 0.jacklab.1 i586 =Sum: SoundTouch is an audio processing library +Des: SoundTouch is a LGPL-licensed open-source audio processing library for changing the Tempo, Pitch and Playback Rates of audio streams or files: * Tempo (time-stretch): Changes the sound to play at faster or slower speed than original, without affecting the sound pitch. * Pitch (key) : Changes the sound pitch or key, without affecting the sound tempo or speed. * Playback Rate : Changes both the sound tempo and pitch, as if an LP disc was played at wrong RPM rate. The SoundTouch library is suited for application developers writing sound processing tools that require tempo/pitch control functionality, or just for playing around with the sound effects. The SoundTouch library source kit includes an example utility SoundStretch which allows processing .wav audio files from a command-line interface. -Des: ##---------------------------------------- =Pkg: spiralmodular 0.2.2a 0.jacklab.2 i586 =Sum: SpiralSynth Modular - object orientated music studio with emphasis on live use +Des: SpiralSynth Modular is an object orientated music studio with an emphasis on live use. You can use it in a fairly straight forward way to make tracks with, or get very experimental. Audio or control data can be freely passed between the plugins. Data can also be fed back on itself for chaotic effects. SSM supports LADSPA plugins, which you can use in the same way as any of the native plugins. The JACK audio server is also supported. SSM is a collaborative open source project, see the AUTHORS file for an extensive list of contributors. This project is released under the terms and restrictions of the GPL license. Author: see /usr/share/doc/packages/AUTHORS -Des: ##---------------------------------------- =Pkg: tap-reverbed r0 0.jacklab.2 i586 =Sum: TAP Reverb Editor - An interactive tool for room acoustics simulation +Des: TAP Reverb Editor is the standalone JACK counterpart of the LADSPA plugin TAP Reverberator, which is part of the TAP-plugins LADSPA plugin set. This means that the two programs/plugins perform the same audio processing, but they have some advantages over each other: * TAP Reverberator is a LADSPA plugin. It has limited capabilities with regard to the user interface (besides global plugin parameters, only the Reverb Type can be choosed; changing any internal parameter is not possible). On the other hand, it can be automated when used in powerful host programs such as Ardour. * TAP Reverb Editor is a separate JACK application. It has its own special user interface that allows for changing any internal parameter on-the-fly, as well as plotting the impulse response of Reverb Types as a visual aid. On the other hand, it cannot be automated from other programs; its main use is to allow for developing one's own Reverb Types. Reverb Types created with this program can be easily 'exported' into the LADSPA version. (Easily means: you have to copy two files and re-compile TAP-plugins.) For a detailed description of this process, please refer to the TAP Reverb Editor user manual. To get satisfactory results with TAP Reverb Editor, you will need to set your system up to run JACK well. See for details. Author: Tom Szilagyi -Des: ##---------------------------------------- =Pkg: timemachine 0.3.0 0.jacklab.1 i586 =Sum: Application that constantly records signals coming in on its inputs +Des: I used to always keep a minidisc recorder in my studio running in a mode where when you pressed record it wrote the last 10 seconds of audio to the disk and then caught up to realtime and kept recording. The recorder died and haven't been able to replace it, so this is a simple jack app to do the same job. It has the advantage that it never clips and can be wired to any part of the jack graph. The idea is that I doodle away with whatever is kicking around in my studio and when I heard an interesting noise, I'd press record and capture it, without having to try and recreate it. :) I've been using it to record occasional bursts of interesting noise from jack apps feeding back into each other. It seems to be stable for me, but there could be threading issues and race condidtions if run without SCHED_FIFO (ie. without jackd -R). Author: Steve Harris -Des: ##---------------------------------------- =Pkg: timemachine 0.3.1 0.jacklab.2 i586 =Sum: Application that constantly records signals coming in on its inputs +Des: I used to always keep a minidisc recorder in my studio running in a mode where when you pressed record it wrote the last 10 seconds of audio to the disk and then caught up to realtime and kept recording. The recorder died and haven't been able to replace it, so this is a simple jack app to do the same job. It has the advantage that it never clips and can be wired to any part of the jack graph. The idea is that I doodle away with whatever is kicking around in my studio and when I heard an interesting noise, I'd press record and capture it, without having to try and recreate it. :) I've been using it to record occasional bursts of interesting noise from jack apps feeding back into each other. It seems to be stable for me, but there could be threading issues and race condidtions if run without SCHED_FIFO (ie. without jackd -R). Author: Steve Harris -Des: ##---------------------------------------- =Pkg: tuneit 0.3 0.jacklab.2 i586 =Sum: A simple command-line instrument tuner for ALSA and JACK +Des: Tune-It is a very simple command-line based instrument tuner for Linux. It uses two different algorithms for pitch detection. By default, a simple and fast Schmitt Trigger based algorithm is used to detect the fundamental frequency of an instrument. For better and more reliable results, there is an alternative FFT based algorithm which is much more CPU intensive. As audio capture backends ALSA and JACK are supported. By default, tuneit will try to use the hw:0,0 ALSA device. Author: Mario Lang -Des: ##---------------------------------------- =Pkg: whysynth 20051005 0.jacklab.1 i586 =Sum: A DSSI Softsynth Plugin +Des: WhySynth is a versatile softsynth which operates as a plugin for the Disposable Soft Synth Interface (DSSI). A brief list of features: - 4 oscillators, 2 filters, 3 LFOs, and 5 envelope generators per voice. - 6 oscillator modes: minBLEP, wavecycle, asynchronous granular, FM, waveshaper, and noise. - 5 filter modes. - flexible modulation and mixdown options. DSSI is a plugin API for software instruments (soft synths) with user interfaces, permitting them to be hosted in-process by audio applications. More information on DSSI can be found at: http://dssi.sourceforge.net/ WhySynth is written by Sean Bolton, and copyright (c)2005 under the GNU General Public License, version 2 or later. -Des: ##---------------------------------------- =Pkg: whysynth 20060122 0.jacklab.1 i586 =Sum: A DSSI Softsynth Plugin +Des: WhySynth is a versatile softsynth which operates as a plugin for the Disposable Soft Synth Interface (DSSI). A brief list of features: - 4 oscillators, 2 filters, 3 LFOs, and 5 envelope generators per voice. - 6 oscillator modes: minBLEP, wavecycle, asynchronous granular, FM, waveshaper, and noise. - 5 filter modes. - flexible modulation and mixdown options. DSSI is a plugin API for software instruments (soft synths) with user interfaces, permitting them to be hosted in-process by audio applications. More information on DSSI can be found at: http://dssi.sourceforge.net/ WhySynth is written by Sean Bolton, and copyright (c)2005 under the GNU General Public License, version 2 or later. -Des: ##---------------------------------------- =Pkg: wsynth-dssi 0.1.3 0.jacklab.1 i586 =Sum: A DSSI Softsynth Plugin +Des: Wsynth-DSSI is the working title of a simple wavetable synth plugin for DSSI. SI is the "Disposable Soft Synth Interface", a plugin API for software instruments and effects with user interfaces, which are used with Linux audio applications. More information on DSSI, along with a few example plugins, can be found at http://dssi.sourceforge.net/ Wsynth-DSSI is written and maintained by Gordon JC Pearce, and copyright 2005 under the GPL. See the file COPYING for details of the GPL. Author: Gordon JC Pearce -Des: ##---------------------------------------- =Pkg: xmms-jackasyn 0.2 0.jacklab.2 i586 =Sum: Jack Audio Output Plug-In for XMMS +Des: XMMS audio output plug-in for the Jack sound daemon. Authors: see AUTHORS -Des: ##---------------------------------------- =Pkg: xmms-jackasyn 0.3 0.jacklab.1 i586 =Sum: Jack Audio Output Plug-In for XMMS +Des: XMMS audio output plug-in for the Jack sound daemon. Authors: see AUTHORS -Des: ##---------------------------------------- =Pkg: xsynth-dssi 0.9.0 0.jacklab.2 i586 =Sum: A software synthesizer plugin for DSSI +Des: Xsynth-DSSI is a classic-analog (VCOs-VCF-VCA) style software synthesizer which operates as a plugin for the Disposable Soft Synth Interface (DSSI). DSSI is a plugin API for software instruments (soft synths) with user interfaces, permitting them to be hosted in-process by Linux audio applications. More information on DSSI can be found at: http://dssi.sourceforge.net/ Xsynth-DSSI retains the basic synthesis model of Xsynth, while adding the following features: - operation as a DSSI plugin, - polyphonic operation, - band-limited oscillators, - a new, more stable filter mode, and - velocity-sensitive envelopes. Xsynth-DSSI is written by Sean Bolton, and copyright (c)2004 under the GNU General Public License, version 2 or later. Xsynth-DSSI is based on Steve Brooke's Xsynth 1.0.2, which is available (also under GPL) at: http://www.ibiblio.org/pub/Linux/apps/sound/misc/xsynth-1.0.2.tar.gz -Des: ##---------------------------------------- =Pkg: rpmkey-jacklab-admine 0.1 1 noarch =Sum: The jacklab-admine rpm public key +Des: The jacklab-admine rpm public key -Des: ##---------------------------------------- =Pkg: vstsdk 2.3 0.jacklab.2 nosrc =Sum: VST Audio Plug-Ins SDK +Des: What is a VST Plug-In? In the widest possible sense a VST Plug-In is an audio process. A VST Plug-In is not an application. It needs a host application that handles the audio streams and makes use of the process the VST Plug-In supplies. Generally speaking, it can take a stream of audio data, apply a process to the audio and send the result back the host application. A VST Plug-In performs its process normally using the processor of the computer, it does not necessarily need dedicated digital signal processors. The audio stream is broken down into a series of blocks. The host supplies the blocks in sequence. The host and its current environment control the block-size. The VST Plug-In maintains all parameters statuses that refer to the running process: The host does not maintain any information about what the Plug-In did with the last block of data it processed. From the host application?s point of view, a VST Plug-In is a black box with an arbitrary number of inputs, outputs (Midi or Audio), and associated parameters. The Host needs no knowledge of the Plug-In process to be able to use it. The Plug-In process can use whatever parameters it wishes, internally to the process, but it can choose to allow the changes to user parameters to be automated by the host, if the host application wishes to do so. 'VST is a trademark of Steinberg Media Technologies GmbH' - VST PlugIn Technology by Steinberg Media Technologies GmbH, - VST PlugIn Interface Technology by Steinberg Media Technologies GmbH -Des: