next up previous
Next: Kernel Up: Networking Previous: Ethernet

PPP

In order to be able to connect via modem using the PPP protocol, you need to create a PPP device. To do that just open the Network Configurator, press and then . Select the interface and press . Almost all the fields will be automatically filled, you just need to specify the telephone number and the connection script (I'll not treat the PAP authentication, your ISP will hopefully provide you with all the information you need). The connection script is a tricky point, specially if you are using a callback system. If you are not using a callback system, let us suppose the connection prompts are these:

	 Connection Software Version 3.0
	
	 xxxx login: username
	 Password:   your_password
in this case the script should look like this:


Ê

If you use a callback system and if the callback software prompts are like the following:

	Callback Software Version 3.0
	
	Where: username
	
    Callback in a few seconds: modemXYZ on line102 ...
then the script needs to be a little longer:


Ê

To activate the connection just select in the Network Configurator the ppp0 interface and press .
Check if the connection has been successfully established typing ping 111.222.333.444 in a shell window, where 111.222...is the IP of your name server. To check the connection I prefer using pppload, a nice application which shows you in a xload-style the connection activity.



Alessandro Usseglio Viretta
Wed Feb 4 11:32:27 MET 1998