Source: ../../fea/mfea_node.hh
|
|
|
|
// -*- c-basic-offset: 4; tab-width: 8; indent-tabs-mode: t -*-
// Copyright (c) 2001-2006 International Computer Science Institute
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the "Software")
// to deal in the Software without restriction, subject to the conditions
// listed in the XORP LICENSE file. These conditions include: you must
// preserve this copyright notice, and you cannot mention the copyright
// holders in advertising related to the Software without their permission.
// The Software is provided WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED. This
// notice is a summary of the XORP LICENSE file; the license in that file is
// legally binding.
// $XORP: xorp/fea/mfea_node.hh,v 1.36 2006/07/03 23:33:36 pavlin Exp $
#ifndef __FEA_MFEA_NODE_HH__
#define __FEA_MFEA_NODE_HH__
//
// MFEA (Multicast Forwarding Engine Abstraction) node definition.
//
#include <vector>
#include "libxorp/ipvx.hh"
#include "libxorp/config_param.hh"
#include "libproto/proto_node.hh"
#include "libproto/proto_register.hh"
#include "libfeaclient/ifmgr_xrl_mirror.hh"
#include "mrt/mifset.hh"
#include "mfea_dataflow.hh"
#include "mfea_mrouter.hh"
//
// Constants definitions
//
//
// Structures/classes, typedefs and macros
//
class EventLoop;
class MfeaVif;
class ProtoComm;
class SgCount;
class VifCount;
/**
* @short The MFEA node class.
*
* There should be one node per MFEA instance. There should be
* one instance per address family.
*/
class MfeaNode : public ProtoNode<MfeaVif>,
public IfMgrHintObserver,
public ServiceChangeObserverBase {
public:
/**
* Constructor for a given address family, module ID, and event loop.
*
* @param family the address family (AF_INET or AF_INET6 for
* IPv4 and IPv6 respectively).
* @param module_id the module ID (@ref xorp_module_id). Should be
* equal to XORP_MODULE_MFEA.
* @param eventloop the event loop to use.
*/
MfeaNode(int family, xorp_module_id module_id, EventLoop& eventloop);
/**
* Destructor
*/
virtual ~MfeaNode();
/**
* Start the node operation.
*
* After the startup operations are completed,
* @ref MfeaNode::final_start() is called internally
* to complete the job.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int start();
/**
* Stop the node operation.
*
* After the shutdown operations are completed,
* @ref MfeaNode::final_stop() is called internally
* to complete the job.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int stop();
/**
* Completely start the node operation.
*
* This method should be called internally after @ref MfeaNode::start()
* to complete the job.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int final_start();
/**
* Completely stop the node operation.
*
* This method should be called internally after @ref MfeaNode::stop()
* to complete the job.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int final_stop();
/**
* Enable node operation.
*
* If an unit is not enabled, it cannot be start, or pending-start.
*/
void enable();
/**
* Disable node operation.
*
* If an unit is disabled, it cannot be start or pending-start.
* If the unit was runnning, it will be stop first.
*/
void disable();
/**
* Test if the underlying system supports IPv4 multicast routing.
*
* @return true if the underlying system supports IPv4 multicast routing,
* otherwise false.
*/
bool have_multicast_routing4() const {
return (_mfea_mrouter.have_multicast_routing4());
}
/**
* Test if the underlying system supports IPv6 multicast routing.
*
* @return true if the underlying system supports IPv6 multicast routing,
* otherwise false.
*/
bool have_multicast_routing6() const {
return (_mfea_mrouter.have_multicast_routing6());
}
/**
* Install a new MFEA vif.
*
* @param vif vif information about the new MfeaVif to install.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_vif(const Vif& vif, string& error_msg);
/**
* Delete an existing MFEA vif.
*
* @param vif_name the name of the vif to delete.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_vif(const string& vif_name, string& error_msg);
/**
* Add a configured vif.
*
* @param vif the vif with the information to add.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_config_vif(const Vif& vif, string& error_msg);
/**
* Add a configured vif.
*
* @param vif_name the name of the vif to add.
* @param vif_index the vif index of the vif to add.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_config_vif(const string& vif_name,
uint32_t vif_index,
string& error_msg);
/**
* Delete a configured vif.
*
* @param vif_name the name of the vif to delete.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_config_vif(const string& vif_name,
string& error_msg);
/**
* Add an address to a configured vif.
*
* @param vif_name the name of the vif.
* @param addr the address to add.
* @param subnet the subnet address to add.
* @param broadcast the broadcast address to add.
* @param peer the peer address to add.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_config_vif_addr(const string& vif_name,
const IPvX& addr,
const IPvXNet& subnet,
const IPvX& broadcast,
const IPvX& peer,
string& error_msg);
/**
* Delete an address from a configured vif.
*
* @param vif_name the name of the vif.
* @param addr the address to delete.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_config_vif_addr(const string& vif_name,
const IPvX& addr,
string& error_msg);
/**
* Set the pif_index of a configured vif.
*
* @param vif_name the name of the vif.
* @param pif_index the physical interface index.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int set_config_pif_index(const string& vif_name,
uint32_t pif_index,
string& error_msg);
/**
* Set the vif flags of a configured vif.
*
* @param vif_name the name of the vif.
* @param is_pim_register true if the vif is a PIM Register interface.
* @param is_p2p true if the vif is point-to-point interface.
* @param is_loopback true if the vif is a loopback interface.
* @param is_multicast true if the vif is multicast capable.
* @param is_broadcast true if the vif is broadcast capable.
* @param is_up true if the underlying vif is UP.
* @param mtu the MTU of the vif.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int set_config_vif_flags(const string& vif_name,
bool is_pim_register,
bool is_p2p,
bool is_loopback,
bool is_multicast,
bool is_broadcast,
bool is_up,
uint32_t mtu,
string& error_msg);
/**
* Complete the set of vif configuration changes.
*
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int set_config_all_vifs_done(string& error_msg);
/**
* Send a message to a client to add a configured vif.
*
* @param dst_module_instance_name the name of the protocol
* instance-destination of the message.
* @param dst_module_id the module ID of the protocol-destination
* of the message.
* @param vif_name the name of the vif to add.
* @param vif_index the vif index of the vif to add.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
virtual int send_add_config_vif(const string& dst_module_instance_name,
xorp_module_id dst_module_id,
const string& vif_name,
uint32_t vif_index) = 0;
/**
* Send a message to a client to delete a configured vif.
*
* @param dst_module_instance_name the name of the protocol
* instance-destination of the message.
* @param dst_module_id the module ID of the protocol-destination
* of the message.
* @param vif_name the name of the vif to delete.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
virtual int send_delete_config_vif(const string& dst_module_instance_name,
xorp_module_id dst_module_id,
const string& vif_name) = 0;
/**
* Send a message to a client to add an address to a configured vif.
*
* @param dst_module_instance_name the name of the protocol
* instance-destination of the message.
* @param dst_module_id the module ID of the protocol-destination
* of the message.
* @param vif_name the name of the vif.
* @param addr the address to add.
* @param subnet the subnet address to add.
* @param broadcast the broadcast address to add.
* @param peer the peer address to add.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
virtual int send_add_config_vif_addr(const string& dst_module_instance_name,
xorp_module_id dst_module_id,
const string& vif_name,
const IPvX& addr,
const IPvXNet& subnet,
const IPvX& broadcast,
const IPvX& peer) = 0;
/**
* Send a message to a client to delete an address from a configured vif.
*
* @param dst_module_instance_name the name of the protocol
* instance-destination of the message.
* @param dst_module_id the module ID of the protocol-destination
* of the message.
* @param vif_name the name of the vif.
* @param addr the address to delete.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
virtual int send_delete_config_vif_addr(const string& dst_module_instance_name,
xorp_module_id dst_module_id,
const string& vif_name,
const IPvX& addr) = 0;
/**
* Send a message to a client to set the vif flags of a configured vif.
*
* @param dst_module_instance_name the name of the protocol
* instance-destination of the message.
* @param dst_module_id the module ID of the protocol-destination
* of the message.
* @param vif_name the name of the vif.
* @param is_pim_register true if the vif is a PIM Register interface.
* @param is_p2p true if the vif is point-to-point interface.
* @param is_loopback true if the vif is a loopback interface.
* @param is_multicast true if the vif is multicast capable.
* @param is_broadcast true if the vif is broadcast capable.
* @param is_up true if the underlying vif is UP.
* @param mtu the MTU of the vif.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
virtual int send_set_config_vif_flags(const string& dst_module_instance_name,
xorp_module_id dst_module_id,
const string& vif_name,
bool is_pim_register,
bool is_p2p,
bool is_loopback,
bool is_multicast,
bool is_broadcast,
bool is_up,
uint32_t mtu) = 0;
/**
* Send a message to a client to complete the set of vif configuration
* changes.
*
* @param dst_module_instance_name the name of the protocol
* instance-destination of the message.
* @param dst_module_id the module ID of the protocol-destination
* of the message.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
virtual int send_set_config_all_vifs_done(const string& dst_module_instance_name,
xorp_module_id dst_module_id) = 0;
/**
* Enable an existing MFEA vif.
*
* @param vif_name the name of the vif to enable.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int enable_vif(const string& vif_name, string& error_msg);
/**
* Disable an existing MFEA vif.
*
* @param vif_name the name of the vif to disable.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int disable_vif(const string& vif_name, string& error_msg);
/**
* Start an existing MFEA vif.
*
* @param vif_name the name of the vif to start.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int start_vif(const string& vif_name, string& error_msg);
/**
* Stop an existing MFEA vif.
*
* @param vif_name the name of the vif to start.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int stop_vif(const string& vif_name, string& error_msg);
/**
* Start MFEA on all enabled interfaces.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int start_all_vifs();
/**
* Stop MFEA on all interfaces it was running on.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int stop_all_vifs();
/**
* Enable MFEA on all interfaces.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int enable_all_vifs();
/**
* Disable MFEA on all interfaces.
*
* All running interfaces are stopped first.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int disable_all_vifs();
/**
* Delete all MFEA vifs.
*/
void delete_all_vifs();
/**
* A method called when a vif has completed its shutdown.
*
* @param vif_name the name of the vif that has completed its shutdown.
*/
void vif_shutdown_completed(const string& vif_name);
/**
* Start operation for a given protocol.
*
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to start.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int start_protocol(xorp_module_id module_id);
/**
* Stop operation for a given protocol.
*
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to stop.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int stop_protocol(xorp_module_id module_id);
/**
* A method used by a protocol instance to register with this MfeaNode.
*
* @param module_instance_name the module instance name of the protocol
* to add.
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to add.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_protocol(const string& module_instance_name,
xorp_module_id module_id);
/**
* A method used by a protocol instance to deregister with this MfeaNode.
*
* @param module_instance_name the module instance name of the protocol
* to delete.
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to delete.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_protocol(const string& module_instance_name,
xorp_module_id module_id);
/**
* Start a protocol on an interface.
*
* @param module_instance_name the module instance name of the protocol
* to start on the interface.
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to start on the interface.
* @param vif_index the vif index of the interface to start the
* protocol on.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int start_protocol_vif(const string& module_instance_name,
xorp_module_id module_id,
uint32_t vif_index);
/**
* Stop a protocol on an interface.
*
* @param module_instance_name the module instance name of the protocol
* to stop on the interface.
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to stop on the interface.
* @param vif_index the vif index of the interface to stop the
* protocol on.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int stop_protocol_vif(const string& module_instance_name,
xorp_module_id module_id,
uint32_t vif_index);
/**
* Add a protocol to receive kernel signal messages.
*
* Add a protocol to the set of protocols that are interested in
* receiving kernel signal messages.
*
* @param module_instance_name the module instance name of the protocol
* to add.
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to add.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_allow_kernel_signal_messages(const string& module_instance_name,
xorp_module_id module_id);
/**
* Delete a protocol from receiving kernel signal messages.
*
* Delete a protocol from the set of protocols that are interested in
* receiving kernel signal messages.
*
* @param module_instance_name the module instance name of the protocol
* to delete.
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to delete.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_allow_kernel_signal_messages(const string& module_instance_name,
xorp_module_id module_id);
/**
* Receive a protocol message from an user-level protocol.
*
* @param src_module_instance_name the module instance name of the
* module-origin of the message.
*
* @param src_module_id the module ID (@ref xorp_module_id) of the
* module-origin of the message.
*
* @param vif_index the vif index of the interface used to receive this
* message.
*
* @param src the source address of the message.
*
* @param dst the destination address of the message.
*
* @param ip_ttl the IP TTL of the message. If it has a negative value,
* the TTL will be set by the lower layers (including the MFEA).
*
* @param ip_tos the IP TOS of the message. If it has a negative value,
* the TOS will be set by the lower layers (including the MFEA).
*
* @param is_router_alert if true, set the Router Alert IP option for
* the IP packet of the outgoung message.
*
* @param rcvbuf the data buffer with the received message.
*
* @param rcvlen the data length in @ref rcvbuf.
*
* @param error_msg the error message (if error).
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int proto_recv(const string& src_module_instance_name,
xorp_module_id src_module_id,
uint32_t vif_index,
const IPvX& src, const IPvX& dst,
int ip_ttl, int ip_tos, bool is_router_alert,
const uint8_t *rcvbuf, size_t rcvlen,
string& error_msg);
/**
* Process an incoming message from the kernel.
*
* This method sends the protocol message to an user-level protocol module.
* Note: it uses the pure virtual ProtoNode::proto_send() method
* that is implemented somewhere else (at a class that inherits this one).
*
* @param dst_module_id the module ID (@ref xorp_module_id) of the
* module-recepient of the message.
*
* @param vif_index the vif index of the interface used to receive this
* message.
*
* @param src the source address of the message.
*
* @param dst the destination address of the message.
*
* @param ip_ttl the IP TTL (Time To Live) of the message. If it has
* a negative value, it should be ignored.
*
* @param ip_tos the IP TOS (Type of Service) of the message. If it has
* a negative value, it should be ignored.
*
* @param is_router_alert if true, the Router Alert IP option for the IP
* packet of the incoming message was set.
*
* @param rcvbuf the data buffer with the received message.
*
* @param rcvlen the data length in @ref rcvbuf.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int proto_comm_recv(xorp_module_id dst_module_id,
uint32_t vif_index,
const IPvX& src, const IPvX& dst,
int ip_ttl, int ip_tos, bool is_router_alert,
const uint8_t *rcvbuf, size_t rcvlen);
/**
* Process NOCACHE, WRONGVIF/WRONGMIF, WHOLEPKT signals from the
* kernel.
*
* The signal is sent to all user-level protocols that expect it.
*
* @param src_module_instance_name unused.
* @param src_module_id the @ref xorp_module_id module ID of the
* associated @ref ProtoComm entry. Note: in the future it may become
* irrelevant.
* @param message_type the message type of the kernel signal (for IPv4
* and IPv6 respectively):
*
<pre>
#define IGMPMSG_NOCACHE 1
#define IGMPMSG_WRONGVIF 2
#define IGMPMSG_WHOLEPKT 3
#define MRT6MSG_NOCACHE 1
#define MRT6MSG_WRONGMIF 2
#define MRT6MSG_WHOLEPKT 3
</pre>
*
* @param vif_index the vif index of the related interface
* (message-specific).
*
* @param src the source address in the message.
* @param dst the destination address in the message.
* @param rcvbuf the data buffer with the additional information in
* the message.
* @param rcvlen the data length in @ref rcvbuf.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int signal_message_recv(const string& src_module_instance_name,
xorp_module_id src_module_id,
int message_type,
uint32_t vif_index,
const IPvX& src,
const IPvX& dst,
const uint8_t *rcvbuf,
size_t rcvlen);
/**
* Process a dataflow upcall from the kernel or from the MFEA internal
* mechanism.
*
* The MFEA internal bandwidth-estimation mechanism is based on
* periodic reading of the kernel multicast forwarding statistics.
* The signal is sent to all user-level protocols that expect it.
*
* Note: either @ref is_threshold_in_packets or @ref is_threshold_in_bytes
* (or both) must be true.
* Note: either @ref is_geq_upcall or @ref is_leq_upcall
* (but not both) must be true.
*
* @param source the source address.
*
* @param group the group address.
*
* @param threshold_interval the dataflow threshold interval.
*
* @param measured_interval the dataflow measured interval.
*
* @param threshold_packets the threshold (in number of packets)
* to compare against.
*
* @param threshold_bytes the threshold (in number of bytes)
* to compare against.
*
* @param measured_packets the number of packets measured within
* the @ref measured_interval.
*
* @param measured_bytes the number of bytes measured within
* the @ref measured_interval.
*
* @param is_threshold_in_packets if true, @ref threshold_packets is valid.
*
* @param is_threshold_in_bytes if true, @ref threshold_bytes is valid.
*
* @param is_geq_upcall if true, the operation for comparison is ">=".
*
* @param is_leq_upcall if true, the operation for comparison is "<=".
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int signal_dataflow_message_recv(const IPvX& source,
const IPvX& group,
const TimeVal& threshold_interval,
const TimeVal& measured_interval,
uint32_t threshold_packets,
uint32_t threshold_bytes,
uint32_t measured_packets,
uint32_t measured_bytes,
bool is_threshold_in_packets,
bool is_threshold_in_bytes,
bool is_geq_upcall,
bool is_leq_upcall);
/**
* Send a signal that a dataflow-related pre-condition is true.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*
* Note: either @ref is_threshold_in_packets or @ref is_threshold_in_bytes
* (or both) must be true.
* Note: either @ref is_geq_upcall or @ref is_leq_upcall
* (but not both) must be true.
*
* @param dst_module_instance_name the module instance name of the
* module-recepient of the message.
*
* @param dst_module_id the module ID (@ref xorp_module_id) of the
* module-recepient of the message.
*
* @param source_addr the source address of the dataflow.
*
* @param group_addr the group address of the dataflow.
*
* @param threshold_interval_sec the number of seconds in the
* interval requested for measurement.
*
* @param threshold_interval_usec the number of microseconds in the
* interval requested for measurement.
*
* @param measured_interval_sec the number of seconds in the
* last measured interval that has triggered the signal.
*
* @param measured_interval_usec the number of microseconds in the
* last measured interval that has triggered the signal.
*
* @param threshold_packets the threshold value to trigger a signal
* (in number of packets).
*
* @param threshold_bytes the threshold value to trigger a signal
* (in bytes).
*
* @param measured_packets the number of packets measured within
* the @ref measured_interval.
*
* @param measured_bytes the number of bytes measured within
* the @ref measured_interval.
*
* @param is_threshold_in_packets if true, @ref threshold_packets is valid.
*
* @param is_threshold_in_bytes if true, @ref threshold_bytes is valid.
*
* @param is_geq_upcall if true, the operation for comparison is ">=".
*
* @param is_leq_upcall if true, the operation for comparison is "<=".
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
virtual int dataflow_signal_send(const string& dst_module_instance_name,
xorp_module_id dst_module_id,
const IPvX& source_addr,
const IPvX& group_addr,
uint32_t threshold_interval_sec,
uint32_t threshold_interval_usec,
uint32_t measured_interval_sec,
uint32_t measured_interval_usec,
uint32_t threshold_packets,
uint32_t threshold_bytes,
uint32_t measured_packets,
uint32_t measured_bytes,
bool is_threshold_in_packets,
bool is_threshold_in_bytes,
bool is_geq_upcall,
bool is_leq_upcall) = 0;
/**
* Join a multicast group.
*
* @param module_instance_name the module instance name of the protocol
* to join the multicast group.
*
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to join the multicast group.
*
* @param vif_index the vif index of the interface to join.
*
* @param group the multicast group to join.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int join_multicast_group(const string& module_instance_name,
xorp_module_id module_id,
uint32_t vif_index,
const IPvX& group);
/**
* Leave a multicast group.
*
* @param module_instance_name the module instance name of the protocol
* to leave the multicast group.
*
* @param module_id the module ID (@ref xorp_module_id) of the protocol
* to leave the multicast group.
*
* @param vif_index the vif index of the interface to leave.
*
* @param group the multicast group to leave.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int leave_multicast_group(const string& module_instance_name,
xorp_module_id module_id,
uint32_t vif_index,
const IPvX& group);
/**
* Add Multicast Forwarding Cache (MFC) to the kernel.
*
* @param module_instance_name the module instance name of the protocol
* that adds the MFC.
*
* @param source the source address.
*
* @param group the group address.
*
* @param iif_vif_index the vif index of the incoming interface.
*
* @param oiflist the bitset with the outgoing interfaces.
*
* @param oiflist_disable_wrongvif the bitset with the outgoing interfaces
* to disable the WRONGVIF signal.
*
* @param max_vifs_oiflist the number of vifs covered by @ref oiflist
* or @ref oiflist_disable_wrongvif.
*
* @param rp_addr the RP address.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_mfc(const string& module_instance_name,
const IPvX& source, const IPvX& group,
uint32_t iif_vif_index, const Mifset& oiflist,
const Mifset& oiflist_disable_wrongvif,
uint32_t max_vifs_oiflist,
const IPvX& rp_addr);
/**
* Delete Multicast Forwarding Cache (MFC) from the kernel.
*
* Note: all corresponding dataflow entries are also removed.
*
* @param module_instance_name the module instance name of the protocol
* that deletes the MFC.
*
* @param source the source address.
*
* @param group the group address.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_mfc(const string& module_instance_name,
const IPvX& source, const IPvX& group);
/**
* Add a dataflow monitor entry.
*
* Note: either @ref is_threshold_in_packets or @ref is_threshold_in_bytes
* (or both) must be true.
* Note: either @ref is_geq_upcall or @ref is_leq_upcall
* (but not both) must be true.
*
* @param module_instance_name the module instance name of the protocol
* that adds the dataflow monitor entry.
*
* @param source the source address.
*
* @param group the group address.
*
* @param threshold_interval the dataflow threshold interval.
*
* @param threshold_packets the threshold (in number of packets) to
* compare against.
*
* @param threshold_bytes the threshold (in number of bytes) to
* compare against.
*
* @param is_threshold_in_packets if true, @ref threshold_packets is valid.
*
* @param is_threshold_in_bytes if true, @ref threshold_bytes is valid.
*
* @param is_geq_upcall if true, the operation for comparison is ">=".
*
* @param is_leq_upcall if true, the operation for comparison is "<=".
*
* @param error_msg the error message (if error).
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_dataflow_monitor(const string& module_instance_name,
const IPvX& source, const IPvX& group,
const TimeVal& threshold_interval,
uint32_t threshold_packets,
uint32_t threshold_bytes,
bool is_threshold_in_packets,
bool is_threshold_in_bytes,
bool is_geq_upcall,
bool is_leq_upcall,
string& error_msg);
/**
* Delete a dataflow monitor entry.
*
* Note: either @ref is_threshold_in_packets or @ref is_threshold_in_bytes
* (or both) must be true.
* Note: either @ref is_geq_upcall or @ref is_leq_upcall
* (but not both) must be true.
*
* @param module_instance_name the module instance name of the protocol
* that deletes the dataflow monitor entry.
*
* @param source the source address.
*
* @param group the group address.
*
* @param threshold_interval the dataflow threshold interval.
*
* @param threshold_packets the threshold (in number of packets) to
* compare against.
*
* @param threshold_bytes the threshold (in number of bytes) to
* compare against.
*
* @param is_threshold_in_packets if true, @ref threshold_packets is valid.
*
* @param is_threshold_in_bytes if true, @ref threshold_bytes is valid.
*
* @param is_geq_upcall if true, the operation for comparison is ">=".
*
* @param is_leq_upcall if true, the operation for comparison is "<=".
*
* @param error_msg the error message (if error).
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_dataflow_monitor(const string& module_instance_name,
const IPvX& source, const IPvX& group,
const TimeVal& threshold_interval,
uint32_t threshold_packets,
uint32_t threshold_bytes,
bool is_threshold_in_packets,
bool is_threshold_in_bytes,
bool is_geq_upcall,
bool is_leq_upcall,
string& error_msg);
/**
* Delete all dataflow monitor entries for a given source and group
* address.
*
* @param module_instance_name the module instance name of the protocol
* that deletes the dataflow monitor entry.
*
* @param source the source address.
*
* @param group the group address.
*
* @param error_msg the error message (if error).
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_all_dataflow_monitor(const string& module_instance_name,
const IPvX& source,
const IPvX& group,
string& error_msg);
/**
* Add a multicast vif to the kernel.
*
* @param vif_index the vif index of the interface to add.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_multicast_vif(uint32_t vif_index);
/**
* Delete a multicast vif from the kernel.
*
* @param vif_index the vif index of the interface to delete.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_multicast_vif(uint32_t vif_index);
/**
* Get MFC multicast forwarding statistics from the kernel.
*
* Get the number of packets and bytes forwarded by a particular
* Multicast Forwarding Cache (MFC) entry in the kernel, and the number
* of packets arrived on wrong interface for that entry.
*
* @param source the MFC source address.
* @param group the MFC group address.
* @param sg_count a reference to a @ref SgCount class to place
* the result: the number of packets and bytes forwarded by the particular
* MFC entry, and the number of packets arrived on a wrong interface.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int get_sg_count(const IPvX& source, const IPvX& group,
SgCount& sg_count);
/**
* Get interface multicast forwarding statistics from the kernel.
*
* Get the number of packets and bytes received on, or forwarded on
* a particular multicast interface.
*
* @param vif_index the vif index of the virtual multicast interface whose
* statistics we need.
* @param vif_count a reference to a @ref VifCount class to store
* the result.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int get_vif_count(uint32_t vif_index, VifCount& vif_count);
/**
* Get a reference to the mrouter (@ref MfeaMrouter).
*
* @return a reference to the mrouter (@ref MfeaMrouter).
*/
MfeaMrouter& mfea_mrouter() { return (_mfea_mrouter); }
/**
* Get a reference to the dataflow table (@ref MfeaDft).
*
* @return a reference to the dataflow table (@ref MfeaDft).
*/
MfeaDft& mfea_dft() { return (_mfea_dft); }
/**
* Get a reference to the vector-array of installed @ref ProtoComm entries.
*
* @return a reference to the vector-array of installed @ref ProtoComm
* entries.
*/
vector<ProtoComm *>& proto_comms() { return (_proto_comms); }
/**
* Find an @ref ProtoComm entry for a given module ID
* (@ref xorp_module_id).
*
* @param module_id the module ID (@ref xorp_module_id) to search for.
* @return the corresponding @ref ProtoComm entry if found, otherwise NULL.
*/
ProtoComm *proto_comm_find_by_module_id(xorp_module_id module_id) const;
/**
* Find an @ref ProtoComm entry for a given IP protocol number.
*
* @param ip_protocol the IP protocol number ot search for.
* @return the corresponding @ref ProtoComm entry if found, otherwise NULL.
*/
ProtoComm *proto_comm_find_by_ip_protocol(int ip_protocol) const;
/**
* Test if trace log is enabled.
*
* This method is used to test whether to output trace log debug messges.
*
* @return true if trace log is enabled, otherwise false.
*/
bool is_log_trace() const { return (_is_log_trace); }
/**
* Enable/disable trace log.
*
* This method is used to enable/disable trace log debug messages output.
*
* @param is_enabled if true, trace log is enabled, otherwise is disabled.
*/
void set_log_trace(bool is_enabled) { _is_log_trace = is_enabled; }
protected:
//
// IfMgrHintObserver methods
//
void tree_complete();
void updates_made();
private:
/**
* A method invoked when the status of a service changes.
*
* @param service the service whose status has changed.
* @param old_status the old status.
* @param new_status the new status.
*/
void status_change(ServiceBase* service,
ServiceStatus old_status,
ServiceStatus new_status);
/**
* Get a reference to the service base of the interface manager.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*
* @return a reference to the service base of the interface manager.
*/
virtual const ServiceBase* ifmgr_mirror_service_base() const = 0;
/**
* Get a reference to the interface manager tree.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*
* @return a reference to the interface manager tree.
*/
virtual const IfMgrIfTree& ifmgr_iftree() const = 0;
/**
* Initiate registration with the FEA.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*/
virtual void fea_register_startup() = 0;
/**
* Initiate de-registration with the FEA.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*/
virtual void fea_register_shutdown() = 0;
int add_pim_register_vif();
// Private state
MfeaMrouter _mfea_mrouter; // The mrouter state
vector<ProtoComm *> _proto_comms; // The set of active ProtoComm entries
MfeaDft _mfea_dft; // The dataflow monitoring table
//
// The state to register:
// - protocol instances
// - protocol instances interested in receiving kernel signal messages
ProtoRegister _proto_register;
ProtoRegister _kernel_signal_messages_register;
//
// A local copy with the interface state information
//
IfMgrIfTree _iftree;
//
// Debug and test-related state
//
bool _is_log_trace; // If true, enable XLOG_TRACE()
};
//
// Global variables
//
//
// Global functions prototypes
//
#endif // __FEA_MFEA_NODE_HH__
Generated by: pavlin on possum.icir.org on Wed Aug 2 15:36:19 2006, using kdoc $.
