Fax

Receiver Side
To set a fax machine to receive event messages:
Step 1: Right-click on the lower half of the configuration screen, the receiver entry field, to display the add recipient prompt.

Step 2: An Add receiver prompt displays. Enter the phone number of the event notification receiving fax
machine.

Step 3: Enter the Outside line number.
Step 4: Enter the Delay Second used to delay before dialing.
Step 5: Enter the level of severity of events to be sent via fax.
Step 6: Repeat this process to add more receivers.

Note that physical connection and Fax service with Windows MAPI should be ready before configuring this function.


Sender Side
From the Module Config window:
Step 1: Find the Fax settings from the pull-down list
Step 2: Click on the On/Off switch besides the pull-down button to enable Fax notification.
switched ON switched OFF
Step 3: Set Status to Enable if you want the module to be activated every time the Configuration Client is started. Note that the On/Off switch should also be in the ON position before you turned off the server or closed the utility. Otherwise, you will have to manually enable the function.
Step 4: Select the severity level of events to be sent to the receiver station.
Step 5: The Fax device row shows the Fax machine(s) currently available. Check for approprate setup in Windows control panel.
Step 6: Queue size determines how many events will be accumulated to be sent via single Fax transmissions.


Back to Configuration Client page