"Linux Gazette...making Linux just a little more fun!"

Mail for the Home Network

By JC Pollman and Bill Mote

Mail for the Home Network

Mail for the home network sounds like a fairly simple project, but it is quite ambitious: say good-bye to the wife and kids for the better part of a week if this is new ground for you. Rest assured, the end results are worth it.

Disclaimer: This article provides information we have gleamed from reading the books, the HOWTOs, man pages, usenet news groups, and countless hours banging on the keyboard. It is not meant to be an all inclusive exhaustive study on the topic, but rather, a stepping stone from the novice to the intermediate user.  All the examples are taken directly from our home networks so we know they work.

How to use this guide:

Prerequisites: This guide assumes that you have the following things installed:
    1. You must have a legal domain name
    2. You must be using IP Masquerade to "hide" your machine from the internet
    3. And that you can consistently connect to the internet
What should home mail do? Before we go sprinting off into the guts of this project, lets consider what we want this mail system to do: Home mail sounds like a simple concept, especially as many user email programs, like netscape, seem to handle all the necessary functions all by themselves. Unfortunately, there is a big difference between a user's mail "system" and a network mail system. Your mail system will need at least five programs to function properly: Install the programs. Before we get started, check to see that you have all the necessary programs installed.  Easiest way to check is to issue the whereis command:
whereis sendmail [Enter]
For those of you using RedHat, you can type:
rpm -qa|grep sendmail [Enter]
to see if any sendmail package is installed. Other distributions have a similar way of checking if a package is installed. Make sure you installed the sendmail-cf package as well.

procmail: Whatever version came with your distribution is fine.
ipop3d: Whatever version came with your distribution is fine. Note: most distributions put ipop3d in the imap package.
fetchmail: Fetchmail is a moving target and new versions come out frequently. We would suggest using version 5.0 or higher, though whatever came with your distribution is probably fine.
sendmail: Most distributions come with three sendmail packages: sendmail, sendmail-cf, and sendmail-doc. Install all three. We will be using sendmail version 8.9.3 in this article. If you are running anything less than version 8.9.2 we very strongly recommend you upgrade, both because of security reasons, and because most of the information presented here will not be useable with older versions.
m4: Whatever version came with your distribution should be fine.

Let's get started! Do 10 sets of finger exercises, replace Zeppelin with a Mozart CD, and click on the links below. Note: follow them IN ORDER, as some programs rely on others!

Setting up dns for mail
Setting up procmail
Setting up sendmail
Setting up pop3
Setting up fetchmail
Some Final Thoughs

Copyright © 1999, JC Pollman and Bill Mote
Published in Issue 45 of Linux Gazette, September 1999