[gelöst] Klötchenbildung mit Cine S2 V7A

[strike]

Hallo,

Ich habe nach dem positiven Bericht hier im Forum mir mal eine Cine S2 V7A besorgt.
Leider läuft diese nicht zufriedenstellend.
Ich habe auf allen Sendern eine starke Klötchenbildung.
Emfangshardware, Kabel und Rechner liefen mit der Cine S2 5.5 problemlos

Code:

dkms status
dddvb, 0.9.28~v7a.0easyVDR0, 4.4.0-45-generic, x86_64: installed
nvidia-304, 304.134, 4.4.0-45-generic, x86_64: installed

Code:

tail -f /var/log/syslog
Mar 10 21:22:15 (none) vdr: [3252] frontend 0/0 timed out while tuning to channel 237 (Animax), tp 112343
Mar 10 21:26:06 (none) vdr: [3252] frontend 0/0 timed out while tuning to channel 120 (Eurosport 2 Ger), tp 112721
Mar 10 21:26:36 (none) vdr: audio/alsa: avail underrun error? 'Datenübergabe unterbrochen (broken pipe)'
Mar 10 21:26:54 (none) vdr: [softhddev] empty video packet 11 bytes
Mar 10 21:27:43 (none) vdr: [3253] ERROR: can't set filter (pid=65535, tid=02, mask=FF): Das Argument ist ungültig
Mar 10 21:27:43 (none) kernel: [ 1118.125347] DVB (dvb_dmxdev_filter_start): could not set feed
Mar 10 21:27:43 (none) kernel: [ 1118.125362] dvb_demux_feed_del: feed not in list (type=1 state=0 pid=ffff)
Mar 10 21:28:54 (none) vdr: [3252] frontend 0/0 timed out while tuning to channel 285 (Franken SAT), tp 212246
Mar 10 21:32:24 (none) vdr: [3252] frontend 0/0 timed out while tuning to channel 236 (Animax), tp 111023
Mar 10 21:33:26 (none) vdr: audio/alsa: avail underrun error? 'Datenübergabe unterbrochen (broken pipe)'

Code:

[email protected]_MN78:~# femon -H -c5 -a0
FE: STV0910 (DVBS)
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
[email protected]_MN78:~# femon -H -c5 -a1
FE: STV0910 (DVBS)
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK
status SCVYL | signal  10% | snr   0% | ber 0 | unc 1 | FE_HAS_LOCK

Hier noch eine aktuelle easyinfo
Gruß
strike

[strike]

Hallo,

Das Problem lag an meinem Mainboard.

SSD und Cine S2 V7A in anderen Rechner eingebaut. -> alles IO.