graphLCD T6963c keine Ausgabe

[CaptainChaos]

Hallo zusammen,

ich habe noch immer das ein oder andere Problem mit meinem easyVDR. Jetzt ist es das Display. Ich habe ein LCD mit einem T6963c Controller. Ich habe soweit alles konfiguriert (meine ich zumindestens). Im Syslog erscheint folgendes:

Code:

Jan 22 11:01:10 (none) showpic: t6963c: Testing ECP mode...
Jan 22 11:01:10 (none) showpic: t6963c: working!
Jan 22 11:01:10 (none) showpic: t6963c: T6963 initialized.
Jan 22 11:01:10 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte00.glcd loaded.
Jan 22 11:01:11 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte01.glcd loaded.
Jan 22 11:01:11 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte02.glcd loaded.
Jan 22 11:01:11 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte03.glcd loaded.
Jan 22 11:01:11 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte04.glcd loaded.
Jan 22 11:01:12 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte05.glcd loaded.
Jan 22 11:01:12 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte06.glcd loaded.
Jan 22 11:01:12 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte07.glcd loaded.
Jan 22 11:01:13 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte08.glcd loaded.
Jan 22 11:01:13 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte09.glcd loaded.
Jan 22 11:01:13 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte10.glcd loaded.
Jan 22 11:01:13 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte11.glcd loaded.
Jan 22 11:01:14 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start_240x128/starte12.glcd loaded.
Jan 22 11:01:14 (none) showpic: glcdgraphics: load /etc/vdr/plugins/graphlcd/start_240x128/starte.sh failed, wrong header (cGLCDFile::Load).

und:

Code:

Jan 22 11:02:19 (none) showpic: Error: No config file specified, using default (/etc/graphlcd.conf).
Jan 22 11:02:19 (none) showpic: t6963c: Testing ECP mode...
Jan 22 11:02:19 (none) showpic: t6963c: working!
Jan 22 11:02:19 (none) showpic: t6963c: T6963 initialized.
Jan 22 11:02:19 (none) showpic: glcdgraphics: image /etc/vdr/plugins/graphlcd/start/start_240x128.glcd loaded.

Ich finde, das sieht eigentlich ganz gut aus, allerdings ist nichts auf dem Display zu sehen. Kein Flackern, keine Streifen, nichts.

Sehe ich das richtig, dass es von Seiten des VDR soweit ok ist? Dann weiß ich ja, dass es ein Hardwareproblem wäre.

Gruss
  CaptainChaos