Neuinstallation mit easyVDR stable

[Lubber]

Hi

Testbereitschaft ist da.
Ich habe die Details meiner Fernbedienung nicht genannt, weil ich glaube, das das nichts mit meiner Fernbedienung zu tun hat sondern generell mit der set-up-routine.
Ich habe die Fernbedienung bei meinen Tests, (ca. 5-6 Installationen ea5 pre) immer problemlos konfigurieren können.

Nun zu den Ausgaben (auf der easyvdr management konsole):
irw:

Code:

[email protected]:/home/easyvdr# irw

Cannot connect to socket /run/lirc/lircd: Connection refused

sudo systemctl status lircd.service:

Code:

[email protected]:/home/easyvdr# sudo systemctl status lircd.service
● lircd.service - Flexible IR remote input/output application support
     Loaded: loaded (/lib/systemd/system/lircd.service; enabled; vendor preset: enabled)
     Active: failed (Result: signal) since Sat 2020-05-16 17:29:46 CEST; 6min ago
TriggeredBy: ● lircd.socket
       Docs: man:lircd(8)
             http://lirc.org/html/configure.html
    Process: 1818 ExecStart=/usr/sbin/lircd --nodaemon (code=killed, signal=SEGV)
   Main PID: 1818 (code=killed, signal=SEGV)

Mai 16 17:29:46 easyVDR lircd[1818]: Warning: cannot open /etc/lirc/lirc_options.conf
Mai 16 17:29:46 easyVDR lircd-0.10.1[1818]: Info: lircd:  Opening log, level: Info
Mai 16 17:29:46 easyVDR lircd-0.10.1[1818]: Notice: Version: lircd 0.10.1
Mai 16 17:29:46 easyVDR lircd-0.10.1[1818]: Notice: System info: Linux easyVDR 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC>
Mai 16 17:29:46 easyVDR systemd[1]: lircd.service: Main process exited, code=killed, status=11/SEGV
Mai 16 17:29:46 easyVDR systemd[1]: lircd.service: Failed with result 'signal'.
Mai 16 17:29:46 easyVDR systemd[1]: Failed to start Flexible IR remote input/output application support.
Mai 16 17:29:46 easyVDR systemd[1]: lircd.service: Start request repeated too quickly.
Mai 16 17:29:46 easyVDR systemd[1]: lircd.service: Failed with result 'signal'.
Mai 16 17:29:46 easyVDR systemd[1]: Failed to start Flexible IR remote input/output application support.

DISPLAY=:0 xinput list

Code:

[email protected]:/home/easyvdr# DISPLAY=:0 xinput list
⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ Mouse                                     id=9    [slave  pointer  (2)]
⎜   ↳ Mouse Consumer Control                    id=11   [slave  pointer  (2)]
⎜   ↳ Logitech K400 Plus                        id=12   [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ Power Button                              id=6    [slave  keyboard (3)]
    ↳ Power Button                              id=7    [slave  keyboard (3)]
    ↳ Mouse                                     id=8    [slave  keyboard (3)]
    ↳ Mouse System Control                      id=10   [slave  keyboard (3)]
    ↳ Eee PC WMI hotkeys                        id=13   [slave  keyboard (3)]
    ↳ Mouse Consumer Control                    id=14   [slave  keyboard (3)]
    ↳ Logitech K400 Plus                        id=15   [slave  keyboard (3)]

Meine X10:
Usb Empfänger am Rechner: Funkreceiver_X10
Fernbedienung: Medion_X10_40009936

Gruß

KLaus