Compile von VDR 2.4.1 für Plugin easyvdr Test

[SurfaceCleanerZ]

Ich hatte in der make.config lirc an, das hab ich deaktiviert und nach make clean und und löschen von PLUGINS/lib-Verzeichnis neu gebaut (vdr und beide Plugins).

Jun 23 21:28:56 easyVDR vdr: [18671] VDR version 2.4.2 started
Jun 23 21:28:56 easyVDR vdr: [18671] codeset is 'UTF-8' - known
Jun 23 21:28:56 easyVDR vdr: [18671] found 28 locales in /usr/src/vdr-2.4.2/vdr/locale
Jun 23 21:28:56 easyVDR vdr: [18671] no locale for language code 'bul'
Jun 23 21:28:56 easyVDR vdr: [18671] loading plugin: /usr/src/vdr-2.4.2/vdr/PLUGINS/lib/libvdr-easyvdr.so.2.4.2
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./setup.conf
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./sources.conf
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./diseqc.conf
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./scr.conf
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./channels.conf
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./timers.conf
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./svdrphosts.conf
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./keymacros.conf
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./camresponses.conf
Jun 23 21:28:56 easyVDR vdr: [18671] registered source parameters for 'A - ATSC'
Jun 23 21:28:56 easyVDR vdr: [18672] video directory scanner thread started (pid=18671, tid=18672, prio=low)
Jun 23 21:28:56 easyVDR vdr: [18673] epg data reader thread started (pid=18671, tid=18673, prio=high)
Jun 23 21:28:56 easyVDR vdr: [18671] registered source parameters for 'C - DVB-C'
Jun 23 21:28:56 easyVDR vdr: [18671] registered source parameters for 'S - DVB-S'
Jun 23 21:28:56 easyVDR vdr: [18673] reading EPG data from /var/cache/vdr/epg.data
Jun 23 21:28:56 easyVDR vdr: [18671] registered source parameters for 'T - DVB-T'
Jun 23 21:28:56 easyVDR vdr: [18671] detected /dev/dvb/adapter1/frontend0
Jun 23 21:28:56 easyVDR vdr: [18671] detected /dev/dvb/adapter0/frontend0
Jun 23 21:28:56 easyVDR vdr: [18671] skipped /dev/dvb/adapter0/frontend0
Jun 23 21:28:56 easyVDR vdr: [18671] probing /dev/dvb/adapter1/frontend0
Jun 23 21:28:56 easyVDR vdr: [18671] creating cDvbDevice
Jun 23 21:28:56 easyVDR vdr: [18671] new device number 1 (card index 2)
Jun 23 21:28:56 easyVDR vdr: [18673] epg data reader thread ended (pid=18671, tid=18673)
Jun 23 21:28:56 easyVDR vdr: [18671] DVB API version is 0x050B (VDR was built with 0x050B)
Jun 23 21:28:56 easyVDR vdr: [18671] frontend 1/0 provides DVB-T,DVB-T2,DVB-C with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("Silicon Labs Si2168")
Jun 23 21:28:56 easyVDR vdr: [18676] frontend 1/0 tuner thread started (pid=18671, tid=18676, prio=high)
Jun 23 21:28:56 easyVDR vdr: [18676] cTimeMs: using monotonic clock (resolution is 1 ns)
Jun 23 21:28:56 easyVDR vdr: [18671] cTimeMs: using monotonic clock (resolution is 1 ns)
Jun 23 21:28:56 easyVDR vdr: [18671] found 2 DVB devices
Jun 23 21:28:56 easyVDR vdr: [18677] device 1 section handler thread started (pid=18671, tid=18677, prio=low)
Jun 23 21:28:56 easyVDR vdr: [18671] using only 1 DVB device
Jun 23 21:28:56 easyVDR vdr: [18671] initializing plugin: easyvdr (2020.06.20): easyvdr setup helper plugin
Jun 23 21:28:56 easyVDR vdr: [18671] loading plugin: /usr/src/vdr-2.4.2/vdr/PLUGINS/lib/libvdr-softhddevice.so.2.4.2
Jun 23 21:28:56 easyVDR vdr: [18671] new device number 2 (card index 3)
Jun 23 21:28:56 easyVDR vdr: [18671] setting primary device to 2
Jun 23 21:28:56 easyVDR vdr: [18671] info: Plugin started.
Jun 23 21:28:56 easyVDR vdr: [18671] initializing plugin: softhddevice (0.7.0-GITaa9fd0e): Ein Software und GPU emulieres HD-Gerät
Jun 23 21:28:56 easyVDR vdr: [18671] new device number 3 (card index 4)
Jun 23 21:28:56 easyVDR vdr: [18671] setting primary device to 2
Jun 23 21:28:56 easyVDR vdr: audio: 'alsa' output module isn't supported
Jun 23 21:28:56 easyVDR vdr: video: 'vdpau' output module isn't supported
Jun 23 21:28:56 easyVDR vdr: [18671] assuming manual start of VDR
Jun 23 21:28:56 easyVDR vdr: [18671] setting current skin to "lcars"
Jun 23 21:28:56 easyVDR vdr: [18671] loading ./themes/lcars-default.theme
Jun 23 21:28:56 easyVDR vdr: [18671] starting plugin: easyvdr
Jun 23 21:28:56 easyVDR vdr: [18671] starting plugin: softhddevice
Jun 23 21:28:56 easyVDR vdr: [softhddev] softhddevice 2 is not the primary device!
Jun 23 21:28:56 easyVDR vdr: audio: 'alsa' output module isn't supported
Jun 23 21:28:56 easyVDR vdr: [softhddev] ready
Jun 23 21:28:56 easyVDR vdr: [18671] remote control XKeySym - learning keys
Jun 23 21:28:56 easyVDR vdr: [18679] KBD remote control thread started (pid=18671, tid=18679, prio=high)
Jun 23 21:28:56 easyVDR vdr: [18672] video directory scanner thread ended (pid=18671, tid=18672)
Jun 23 21:28:57 easyVDR easyvdr-program-changer[1726]: do_connect: could not open socket
Jun 23 21:28:57 easyVDR easyvdr-program-changer[1726]: open: Zu viele offene Dateien